4 channel amp

sort by:
add tax & shipping for
 
 
 

starting at

$110
  • product
Integrating a bridgeable design the Crunch Power Zone P18004 Car Amplifier a 4-channel amplifier comes with a power range of 450 to 1800 watts for expanded functionality. With the hi-level speaker lead inputs this amplifier supports OEM radios lacking preamp outputs daisy-chain line outputs and oversized speaker terminal outputs. For Instant Maxx power output the Crunch P1800.4 Multi-channel Amplifier features rugged MOSFET power supply. The Crunch Power Zone Amplifier includes fully adjustable hi-pass and low-pass crossovers for enhanced surround sound performance. The Crunch Power Zone P18004 Amplifier’s dimensions are 10 x 2.16 x 14.96 (W x H x D).

starting at

$110
 

starting at

$160
  • product
New 2008 cosmetics design, Removable top, KickEQ™ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination

starting at

$160
 

starting at

$147
  • product
If you have a small vehicle, the Slim Series XM-4S amplifier is great for its low profile that allows it to fit under most front seats. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the wire connections protected and out of sight for a clean-looking installation. Underneath the hood, the XM-4S amplifier delivers 50 watts to four 4-ohm subs, or 95 watts to a pair of subs. Signal-sensing speaker-level inputs activate the amp automatically when it's connected to a factory radio, so there's no remote turn-on lead for you to install. You can adjust the low-pass filter to tailor the signal going to your subs, while a bass boost adds extra punch to the lows. 80Hz Low pass filter switch 40Hz EQ Boost - Also called low boost, an equalization circuit providing a 0 - 10dB adjustment in the critical 40Hz frequency band Perfect for pick-up trucks & compact vehicles Line & Speaker level inputs CEA-2006 Power Compliant Max Power (Watts) - 500W Ad Hoc Power into 4 ohms, THD% - 60W x 4,. 04 Ad Hoc Power into 2 ohms, THD% - 60W x 4,. 1 Bridged into 4 ohms, THD% - 95W x 2 + 250 x 1 Signal to noise ratio (dB) - 106dB Frequency Response (Hz) - 5-100KHz Input Level Range (V) Line level input - 0.3 - 6 Current Drain at rated output (A) - 25 Width (inch) - 8-7/9 Height (inch) - 1-5/7 Depth (inch) - 7-5/7 Weight (Approximate) - 4.85lb 1 year Manufacturer Warranty Professional installation strongly advised

starting at

$147
 

starting at

$20
  • product
Rock out while youre on the road with this 4-channel amplifier that is ideal for use with a Pioneer AVIC-F500BT portable GPS receiver. Simply connect this amplifier to your Pioneer GPS receiver and enjoy your favorite tunes no matter where the road takes you.

starting at

$20
 

starting at

$230
  • product
4-channel car amplifier * 60 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) * Dynamic Thermal Management cooling system * Differential Input circuitry eliminates hum * variable high- and low-pass filters (50-500 Hz, 24 dB/octave) * variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz) *

starting at

$230
 

starting at

$193
  • product
Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs.

starting at

$193
 

starting at

$60
  • product
* 2 stable Variable low pass filters 40240 Hz (12 dB per octave) Variable high pass filters 40400 Hz (12 dB per octave) Variable bass boost 0 ' 12 dB at 45 Hz Low level pass trough RCAs (Channel 1 & 2 only) Encapsulated power & speaker connectors Channel mode selector switch (4/3/2 CH) Bridge- / Tri-mode Protection circuit that safeguards against short circuits, DC-offset & thermal overload Green operation & red protection LEDs 4 channel-amp Peak power: 760W Nominal output power: 4x75W 4 2 x 195W 4 4x100 2 N.A.

starting at

$60
 

starting at

$182
  • product
720 Watts of Maximum Music Power 90W x 4 into 4 Ohms, 20Hz - 50kHz @. Non-Corrosive Aluminum Heat Sink * Dimensions 15-1/4" x 9-1/8" x 2-1/4" * CEA 2006 Power Ratings * RMS (Continuous) Power: 150W x 4 RMS [2ohm @14.4V =1% THD+N] * RMS (Continuous) Power: 110W x 4 RMS [4ohm @14.4V =1% THD+N] * Signal to Noise Ratio: 97dB (Ref: 1W into 4ohm)

starting at

$182
 

starting at

$419
  • product
150 W RMS x 2 @ 1.5 ohm – 4 ohm (11 – 14.5V)

starting at

$419
 

starting at

$111
  • product
Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in Lanzar products.PRODUCT FEATURES:Electronic Crossover Network;Bass Boost Circuit;Variable Phase Shift Control;2 Ohms Stereo Stable;Anti-Thump Turn-On;Tri-Mode Configurable;Soft Turn On/Off;High & Low Level Inputs;Blue Light Illuminated Crossover Control;Power & Protection LED Indicators;Advanced Protection Circuitry;Bass Boost Remote Control.

starting at

$111
 

starting at

$120
  • product
That's the best way to describe Thunder TC amplifiers. No flash. No bling. Nothing but power. TC amplifiers are built for listeners who want their music to be pure and loud. On-board crossovers and EQs let you customize your sound while the Smart Engage Circuitry lets you install TC amps without ripping out your factory system. Thunder TC amps are all about solid MTX power and should only be used when you want to rattle the windows of the vehicles rolling along side you.Patented Smart Engage Circuitry and both High and Low Level Inputs eliminate the need to remove the head unit during most factory integration installs without external adapters, devices or converters.Get all of the power you expect! Pure N-Channel V-FET Technology (Class A/B) - the best design for all multi-channel amplifiers making the output stage more efficient than common Class A/B amps. With this technology, you get more usable power while conventional Class A/B designs lose much more power as heat.Each Thunder amp is tested to guarantee it meets or exceeds customer's expectations and CEA compliant.

starting at

$120
 

starting at

$125
  • product
50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) - High-pass filter (80 Hz, 12 dB/octave) - Variable low-pass filter (50-250 Hz, 12 dB/octave) - Selectable bass boost (0, 6, 12 dB at 45 Hz)

starting at

$125
 

starting at

$247
  • product
Now you can enjoy high-quality bass effect in your car with the JL Audio G4500 AB Amplifier equipped with the switchable bass boost option. The JL Audio G4500 delivers 80 watts of RMS power output from each of its four channels at 4 ohms. You can enjoy clear and crisp sound with extremely low distortion with the JL amplifier’s Class-AB circuitry. With the balanced differential inputs the JL Audio G4500 4-channel Car Amplifier eliminates unwanted system noise. For trouble-free audio reception this amplifier features advanced thermal and low-impedance protection system. Integrated with the tunable frequency filters the JL Audio G4500 4-channel Car Amplifier provides precise-control over the system’s sound.

starting at

$247
 

starting at

$122
  • product
POWER ACOUSTIK BAMF1600/4 BAMF SERIES CLASS A/B AMPLIFIER (150W X 4)FULL MOSFET POWER SUPPLY ; PWM CIRCUITRY; FULL SELECTABLE CROSSOVER ; 3-WAY PROTECTION CIRCUIT; TRI-MODE CAPABLE ; VARIABLE LOW PASS40 HZ250 HZ; VARIABLE HIGH PASS40 HZ250 HZ ; VARIABLE 024 DB BASS BOOST; SUBSONIC CONTROL 30175 KZ ; 2_ STABLE STEREO; 150W X 4

starting at

$122
 

starting at

$131
  • product
Terminator amplifier incorporates high style with the latest technologies. It has a gloss cover that adds a powerful feel to any installation. All connections are on one side making it easy to create a custom looking, clean installation.Terminator amplifier is cooled utilizing active fan cooling - a variable speed internal fan normally reserved for MTX's highest end lines. As you turn your volume up, the amplifier output increases which engage the fan to automatically increase its speed drawing more cool air into the amp. This keeps the amplifier performing at its peak level longer and prevents thermal shutdown due to overheating. Talk about technology making life better. What's better than an affordable amplifier packed full of performance and these features?

starting at

$131
 

starting at

$49
  • product
Add this ultracompact and flexible amplifier head with parallel link output to your existing audio system and enjoy crisp, clear sound quality even at high volume levels.

starting at

$49
 

starting at

$250
  • product
4-channel car amplifier * 120 watts RMS x 4 at 4 ohms (170 watts RMS x 4 at 2 ohms) * 325 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode) * variable high- and low-pass filters (50-200 Hz, 12 dB per octave) * top-mounted controls *

starting at

$250
 

starting at

$116
  • product
POWER ACOUSTIK OV4-1600 4-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER (1600-WATT) 4-CHANNEL; 4? RMS: 150W X 4; 2? RMS: 180W X 4; MONO RMS: 360W; BRIDGED MAX: 1600W; FULL MOSFET POWER SUPPLY; PWM CIRCUITRY; FULL SELECTABLE CROSSOVER ; 3-WAY PROTECTION CIRCUIT; TRI-MODE CAPABLE; VARIABLE LOW PASS 40 HZ120 HZ; VARIABLE HIGH PASS 150 HZ1.5 KHZ; VARIABLE 18 DB BASS BOOST @ 40 HZ; FREQ RESP: 10 HZ TO 30 KHZ; S/N RATIO: 98 DB; THD: 0.02%; 2? STABLE STEREO; SYSTEM DISTRESS INDICATOR; HIGH/LOW LEVEL INPUTS WITH FLOATING GROUND; 4-GAUGE POWER/GROUND CONNECTION; PLATINUM RCA CONNECTORS; LINE OUTPUT WITH FLOATING GROUND; BLUE LED; CHROME TOP PLATE PANEL 4-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER (1600-WATT)

starting at

$116