800 amplifier

sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$49
  • product
The Sony Xplod XM-ZR1252 2-Channel Amplifier comes with a bass boost of up to 10dB at 40 Hz to deliver outstanding bass effect. With the inverted heat sink design the Sony XMZR1252 21 Channel ZR Series Amplifier keeps internal components cool to last long. Integrated with the high-level sensing power-on feature the Sony Xplod amplifier prevents you from running a separate turn-on lead making OEM integration installations easy and fast. The Sony XMZR1252 21 Channel ZR Series Amplifier comes with a removable terminal cover which keeps all the wire connections protected and offer a tidy look. The Sony Xplod measures 15.5 x 2.2 x 10 inches (W x H x D) and weighs 14 lbs.

starting at

$49
 

starting at

$160
  • product
Cell phone signal extender 800 MHz . Works primarily with Cingular, Verizon and all other carriers operating on 800 MHz.

starting at

$160
 

starting at

$102
  • product
CHAOS EXXTREME Power Amplifiers are designed to deliver the clean power needed to bring out the best to your speakers. Features like the varible gain controls, built-in crossovers, and remote subwoofers level controls, are designed to provide system flexbility The BOSS CX750 CHAOS EXTREME 2-channel power amplifier technical features include 800W x 2 max power at 2 OHM, 220W x 2 RMS power at 4 OHM, 1600W x 1 max bridged power at 4 OHM, and 102db signal-to-noise ratio. Other features include trimode operation, remote subwoofer level control, power and protection LEDs, line and speaker level inputs, and a variable gain control, variable lowpass crossover, high pass crossover, plus 18dB variable bass boost, and MOSFET power supply. Dimensions 11-7/8in W x 2-5/8in H x 14-13/16in L

starting at

$102
 

starting at

$70
  • product
BOSS AUDIO D800.2 DIABLO 2-CHANNEL MOSFET BRIDGEABLE POWER AMPLIFIER (800W X 2 MAX @ 2_; 260W X 2 RMS @ 4_; DIM: 2.31"H X 11"W X 15.19"L)TRIMODE OPERATION;BRIDGEABLE; REMOTE SUBWOOFER LEVEL CONTROL; LINE and SPEAKER LEVEL INPUTS;* 0 TO +18 DB VARIABLE BASS BOOST;MOSFET POWER SUPPLY; VARIABLE LOW and HIGH PASS CROSSOVERS; INPUT GAIN CONTROL; INPUT SENSITIVITY SELECTOR;POWER and PROTECTION LEDS;800W X 2 MAX @ 2_;260W X 2 RMS @ 4_;DIM: 2.31"H X 11"W X 15.19"L

starting at

$70
 

starting at

$235
  • product
Mono Amplifier 800 watts RMS x 1 at 4 ohms,1-ohm stable,Class-D design

starting at

$235
 

starting at

$107
  • product
That's the best way to describe Thunder TC amplifiers. No flash. No bling. Nothing but power. TC amplifiers are built for listeners who want their music to be pure and loud. On-board crossovers and EQs let you customize your sound while the Smart Engage Circuitry lets you install TC amps without ripping out your factory system. Thunder TC amps are all about solid MTX power and should only be used when you want to rattle the windows of the vehicles rolling along side you.Patented Smart Engage Circuitry and both High and Low Level Inputs eliminate the need to remove the head unit during most factory integration installs without external adapters, devices or converters.Get all of the power you expect! Pure N-Channel V-FET Technology (Class A/B) - the best design for all multi-channel amplifiers making the output stage more efficient than common Class A/B amps. With this technology, you get more usable power while conventional Class A/B designs lose much more power as heat.Each Thunder amp is tested to guarantee it meets or exceeds customer's expectations and CEA compliant.

starting at

$107
 

starting at

$240
  • product
DUAL-BAND CELLULAR PHONE SIGNAL BOOSTER Designed for consumers, the zBoost dual band cell phone signal booster extends a zBoost Cell Zone for single or multiple users in homes or offices simultaneously. ZBoost Dual Band is compatible with all phones...

starting at

$240
 

starting at

$285
  • product
800 watts RMS x 1 Car Amplifier 500 watts RMS x 1 at 4 ohms,variable low-pass filter,preamp outputs

starting at

$285
 

starting at

$122
  • product
The superior efficiency of a Class-D amplifier means higher power output and greater compactness than an analog amplifier offers.Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer's Class-D amps transform very little power into heat so a higher percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power. The Class-D amplifier's PWM (Pulse Width Modulator) modulates the original audio input signal with a triangulated signal wave which has a much higher fixed frequency. The result is a digital signal which contains both the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) then filters out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.Bass boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-D7400M, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.Built into the GM-D7400M is a very smart crossover network. It works like a gateway, routing the big bass signals (adjustable from 40 to 240Hz or lower, at -12dB/octave) and filtering out higher-frequency signals to that subwoofer. This optimizes your system's efficiency and delivers the best possible sound quality.The GM-D7400M's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.

starting at

$122
 
  • product
Wilson 811210 SignalBoost Dual Band 800-1900 MHz Amplifier - Dual Band Cellular / PCS (800 - 1900 MHz) (WILSON SIGNALBOOST AMPLIFIERS)Wilson 811210 is the manufacturer part number.
 
  • product
Wilson 811101 Single Band 800 MHz Direct Connection Cellular Amplifier 824-894 MHz w/1900 MHz Antenna Bypass - Single Band 800 MHz w/1900 Bypass (WILSON )Wilson 811101 is the manufacturer part number.
 

starting at

$349
  • product
mono subwoofer amplifier * 400 watts RMS x 1 at 4 ohms (800 watts RMS x 1 at 2 ohms) * MTX Prizm EFX selectable color display * semi-parametric EQ (bass boost/cut +/-12 dB at 30-80 Hz) * speaker-level inputs with Smart Engage *

starting at

$349
 

starting at

$224
  • product
Wilson 814004 iDEN 800 MHz High Power Direct Connection Single Band 806-866 MHz Amplifier w/Hardwire & Cigarette Power Supply & 5'RG58 Coax (Approved By Mike & Telus) - CANADA APPROVED AMPLIFIERS (WILSON )Wilson 814004 is the manufacturer part number....

starting at

$224
 

starting at

$83
  • product
POWER ACOUSTIK BAMF800/2 BAMF SERIES CLASS A/B AMPLIFIER (150W X 2)150W X 2; FULL MOSFET POWER SUPPLY ; PWM CIRCUITRY; FULL SELECTABLE CROSSOVER ; 3-WAY PROTECTION CIRCUIT; TRI-MODE CAPABLE ; VARIABLE LOW PASS40 HZ250 HZ; VARIABLE HIGH PASS40 HZ250 HZ ; VARIABLE 024 DB BASS BOOST; SUBSONIC CONTROL 30175 KZ ; 2_ STABLE STEREO;

starting at

$83
 

starting at

$259
  • product
Wilson 814021 iDEN 800 MHz High Power Direct Connection Amplifier (806-866 MHz Nextel Band). Direct Connection Single Band High-Power iDEN 806-869 MHz Amplifier (814021) Features: ? Maximum 5 watts output power on iDEN frequencies ? For use with...

starting at

$259
 

starting at

$79
  • product
max Power 2 Ohms 400w X 2 Rms Power 4 Ohms 125w X 2 Max Bridged Power 4 Ohms 800w X 1 signal-to-noise Ratio 102db Thd 0.01% Dimensions: 11-3/4w X 2-11/16h X 11-3/16l trimode Operation Bridgeable Remote Subwoofer Level Control Line And Speaker Level Inputs variable Gain Control Power And Protection Leds Variable Lowpass Crossover High Pass Crossover 0-+18db Variable Bass Boost Mosfet Power Supply

starting at

$79