Intake manifold in Automotive Parts

Description:

Intake Manifold With Aluminum Crossover Includes: Bracket For Alternator Thermostat Spacers Thermostat, O-Ring, Screws Installation Instructions Fits 4.6L Engines Only Direct Replacement Brand NEW fitting the following years and models: 1996 1997 Ford...

Description:

Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore Flange, Chevy, Small Block, Each

Description:

BRAND NEW GM 3.8L 3800 INTAKE MANIFOLD PLENUM!High Quality Replacement - Reinforced/Updated - AftermarketThis item fits the following years and models:1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Buick LeSabre1995 1996 1997 1998 1999 2000 2001...

Description:

Intake Manifold With Gaskets Improved design to prevent common failures! Square port design - 2 Thermostat housing spacers - 3 Brackets (2 alternator brackets, 1 EGR bracket) - 1 Pipe plug - 1 Alternator spacer - 1 Thermostat housing "0" ring gasket -...

Description:

Intake Manifold, Performer RPM Air Gap, Dual Plane, Aluminum, Natural, Square Bore, Chevy, Small Block, Each

Description:

WEIAND INTAKE MANIFOLD This Weiand Air Systems Action+Plus manifold is designed to increase the performance of the Street Avenger 570CFM Carburetor (ZX482264U) in your Ford 221, 260, 289 or 302 V-8 engine (excluding BOSS)and in your Chevrolet 262, 283,...

Description:

INTAKE MANIFOLD Unlike all-out racing manifolds, this street performance manifold increases horsepower while maintaining good bottom-end power Range: 2000 to 8000 RPM Uses all factory sensors The ultimate street performance manifold! Similar to the...

Description:

Click photo to enlarge. * Improves HP by 17 and torque up to 50 * Better turbo spool-up and throttle response * Lowers Exhaust Gas Temperatures * Perfect complement with your turbo upgrade * Patent Pending Multiple Directional Vane (MDV) Technology *...

Description:

BRAND NEW GM 3.8L 3800 INTAKE MANIFOLD PLENUM!High Quality Replacement - Reinforced/Updated - AftermarketThis item fits the following years and models:1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Buick LeSabre1995 1996 1997 1998 1999 2000 2001...

Description:

1965-1973 Mustang Intake Manifold Dual Plane Select Finish: Satin; Polished; Chrome.

Description:

1965-1973 Mustang Holley Carburetor and Dual Plane Intake Manifold

Description:

* Improves HP by 6 and torque up to 20 * Lowers Exhaust Gas Temperatures * Patent Pending Multiple Directional Vane (MDV) Technology results in a 9.3% flow increase * Superior internal cross section with turning vanes increases intake air flow vs....

Description:

Volvo 760 V6 Intake Manifold O RingReplace your Volvo 760 V6 intake manifold o ring today and improve your engine's performance! Your Volvo's intake manifold is responsible for transferring fuel and air into the engine's cylinders for internal...

Description:

Volvo 260 Intake Manifold O RingReplace your Volvo 260 intake manifold o ring today and improve your engine's performance! Your Volvo's intake manifold is responsible for transferring fuel and air into the engine's cylinders for internal combustion....

Description:

Maintains flow velocity through the valve and redirects the intake charge. 1-piece aluminum casting; no manifolds to trim or plastic pieces to insert. Comes with Boyesen Pro Series Reeds. Will accept

Description:

NEW CHEVY / GMC 4.3L INTAKE MANIFOLD! New & Improved Upper Intake Manifold ! Brand NEW fitting the following years and models: 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Chevy Astro Van 1996 1997 1998 1999 2000 2001 2002 2003 2004 Chevy Express...

Description:

Intake Manifold With Aluminum Crossover Includes: Bracket For Alternator Thermostat Spacers Thermostat, O-Ring, Screws Installation Instructions Fits 4.6L Engines Only Direct Replacement Brand NEW fitting the following years and models: 1996 1997 Ford...

Description:

Intake Manifold With Gaskets Improved design to prevent common failures! Square port design - 2 Thermostat housing spacers - 3 Brackets (2 alternator brackets, 1 EGR bracket) - 1 Pipe plug - 1 Alternator spacer - 1 Thermostat housing "0" ring gasket -...

Description:

NEW FORD UPPER INTAKE MANIFOLD ! New & Improved Upper Intake Manifold WITH Gaskets ! Brand NEW fitting the following years and models: 1999 2000 2001 2002 2003 Ford Windstar Van 3.8 L

Description:

THIS PART COMES WITH A LIMITED LIFETIME WARRANTY Upper Intake Manifold Includes Gasket Set Fits 3.8L Models Does Not Fit Supercharged Engines Brand NEW fitting the following years and models: 1996 1997 1998 1999 2000 2001 2002 2003 Buick Lesabre 1995...

Description:

STREET AVENGER FORD SB INTAKE MANIFOLD This Weiand Air Systems Action+Plus manifold is designed to increase the performance of the Street Avenger 570CFM Carburetor (ZX482264U) in your Ford 221, 260, 289 or 302 V-8 engine (excluding BOSS) Low-rise/dual...

Description:

THIS PART COMES WITH A LIMITED LIFETIME WARRANTY Upper Intake Manifold Includes Gasket Set Fits 3.8L Models Does Not Fit Supercharged Engines Brand NEW fitting the following years and models: 1996 1997 1998 1999 2000 2001 2002 2003 Buick Lesabre 1995...

Description:

Hurricane Intake Manifold3000 - 7500 RPM RangeIncludes nitrous bossesSmall Block Ford 351W CIDThis manifold not legal for sale or use on any pollution controlled motor vehicles.

Description:

Hurricane EFI Conversion Intake ManifoldSingle plane manifold type3000 - 7500 RPM RangeThis manifold not legal for sale or use on any pollution controlled motor vehiclesSmall Block Ford 351W CID

Description:

Intake Manifold With Aluminum Crossover Includes: Bracket For Alternator Thermostat Spacers Thermostat, O-Ring, Screws Installation Instructions Fits 4.6L Engines Only Direct Replacement Brand NEW fitting the following years and models: 1996 1997 Ford...

Description:

LINKAGE KIT FOR HOLLEY 4-BBL. CARBURETOR Add V8 power to your in-line 6-cylinder Jeep Choose Offenhauser intake manifold for model specific Jeep vehicles and Holley carburetor

Description:

Intake Manifold With Aluminum Crossover Includes: Bracket For Alternator Thermostat Spacers Thermostat, O-Ring, Screws Installation Instructions Fits 4.6L Engines Only Direct Replacement Brand NEW fitting the following years and models: 1996 1997 Ford...

Description:

THIS PART COMES WITH A LIMITED LIFETIME WARRANTY Upper Intake Manifold Includes Gasket Set Fits 3.8L Models Does Not Fit Supercharged Engines Brand NEW fitting the following years and models: 1996 1997 1998 1999 2000 2001 2002 2003 Buick Lesabre 1995...

Description:

BRAND NEW GM 3.8L 3800 INTAKE MANIFOLD PLENUM!High Quality Replacement - Reinforced/Updated - AftermarketThis item fits the following years and models:1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Buick LeSabre1995 1996 1997 1998 1999 2000 2001...

Description:

Cyclone Intake ManifoldThe Cyclone is our lowest profile SB Chevy manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of...