Automotive dent repair in Automotive Repair Tools

Description:

T-HANDLE BODY REPAIR TOOL KIT Chosen by the prosbody shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on smaller...

Description:

• The effecient way to remove dents w/o damaging the paint • Lightweight duel lever dent puller • Two sizes of pulling knobs • Two strengths of specialized glue • Nylon knockdown to finish the work • No holes to drill, no interior panels to be removed...

Description:

Pulls out small dents by suction power alone! Many other holding and pulling applications. Super-tough rubber cup and one-piece cast aluminum grip. Diameter of cup: 5in.

Description:

CROSS BAR BODY REPAIR TOOL KIT Chosen by the prosbody shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on smaller...

Description:

Also known as: KD 41700, KD41700, KDT41700; This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow...

Description:

Also known as: OTC-4579, OTC4579; Features and Benefits Internal and External Jaws provide a variety of combinations to pull bearings, gears and seals Pulls Flange-type rear axle and most front wheel drive hubs Set includes grip wrench adapter and dent...

Description:

Puller easily pops dented hoods, doors and fenders into place. 6 in.-diameter suction disc with steel handle and steel support plates ebles strong pull.It works on nearly every dent where the sheet metal has not been creased. Lift edge to release...

Description:

More than 1 dent? Get the job done faster with additional pulling tabs

Description:

Features and Benefits: Works great to restore body lines Works with all UNI-SPOTTER stud welders Quick & easy to use Lightweight and portable for out-of-position pulls

Description:

Steck brings you innovative tools for all of your auto-body needs. U.S.A. Time-saving tool holds door open while you hammer, pull, grind, sand or paint it Works great for dent removal Fo...

Description:

CROSS BAR BODY REPAIR TOOL KIT Chosen by the prosbody shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on smaller...

Description:

COMPLETE PROFESSIONAL BODY REPAIR TOOL KIT Chosen by the prosbody shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on...

Description:

Also known as: DENDFPK100, DFXDF-PK100, DTF-DF-PK100; PRO KIT GLUE PULLER

Description:

Also known as: HNS-DK1000, HS DK1000, HSADK1000, UNI-DK1000; Features and Benefits: Works great to restore body lines Works with all UNI-SPOTTER stud welders Quick & easy to use Lightweight and portable for out-of-position pulls

Description:

Also known as: ESC70100; Features and Benefits Demount tubeless truck tires in seconds No damage to aluminum or painted wheels Never lift tire to demount rear or bottom bead Consists of top bead demount tool, bottom bead demount tool and rim protector...

Description:

Also known as: AP 9038, AP9038, APT-9038, AST-9038, AST9038; Features and Benefits: Suction pad for secure grip 100 lbs. lifting capacity Great for small dent removal Makes windshield replacement a one man job Great for handling materials like glass,...

Description:

COMPLETE PROFESSIONAL BODY REPAIR TOOL KIT Chosen by the prosbody shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on...

Description:

Also known as: DFXDFPDRKIT33, DTF-DF-PDRKIT33; 33 Piece If you?re looking for a selection of tools that will make the job easy, this is it. The thirty-three piece paintless dent repair kit contains an essential gathering of sixteen expertly designed...

Description:

Tool used to pull dented sheet metal back into position. To use, drill hole in the deepest part of the dent, insert hook or self-threading screw tip and tap lightly with a 2-1/2 lb. slide hammer to remove dent. A 13-inch long that enables high pulling...

Description:

Also known as: LNCLP2000120, LNXLP2000-120, LNXLP2000/120; Features and Benefits: Primary voltage: 208/230 single phase 60/50 Hz Line fuse: 30 AMP Size: 11-1/2"H X 15"W x 16-3/4"L Power input cable: 25, No. 12/3 wire Cable assembly length: 7 ground, 7...

Description:

Also known as: OTC898A; Features and Benefits: 17" long Pyralin handle grip Removes dents without removing the interior panels and upholstery Replaceable self-tapping screw Often, the biggest time-consuming part of dent removal is the removal and...

Description:

Also known as: DENDF701, DFXDF701, DTF-DF-701; DF-701 The Stripper, Seam/Seal Remover Kit Features and Benefits: Blasts through the heaviest undercoating Chip guard and seam seal in seconds Thoroughly cleans and exposes all welds Slash time off...

Description:

Also known as: DENDF-HD0140, DENDFHD0140; Features and Benefits Flexible - fits any wheel well or lipped panel 1.5 ton rated - more than enough power and strength All-in-one tool Easy to use - spring loaded hinges hold clamp in position 1 year warranty...

Description:

Also known as: BLJK20SC; Features and Benefits: Manufactured for the professional Professional quality crome tools 20 Black Jack self vulcanizing professional 4 plugs (1) 2oz. jar of Plug Lube

Description:

Also known as: DENDF3, DFXDF3, DTF-DF-3; Features and Benefits: Manufactured in Switzerland, this extruded aluminum tram is lightweight yet remains rigid when fully extended The telescoping design allows for confident one-person operation Standard and...

Description:

Also known as: DENDF505, DFXDF505, DTF-DF-505; Features and Benefits: The Maxi is a 220 volt single phase dent pulling station. Provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to...

Description:

Also known as: OTC-7948, OTC7948; Features and Benefits: Puller jaws can be set up for 10-way internal or external jobs Attachments include a dent puller, internal/external pulling jaws, puller hook attachment, rear axle pulling attachment, and a grip...

Description:

Also known as: LNXLP2000; Features and Benefits: Primary voltage: 208/230 single phase 60/50 Hz Line fuse: 30 AMP Size: 11-1/2"H X 15"W x 16-3/4"L Power input cable: 25, No. 12/3 wire Cable assembly length: 7 ground, 7 power Maximum welding capacity:...

Description:

Also known as: DENDF1465, DFXDF1465, DTF-DF-1465; Features and Benefits: This German made bit may be used with off brand spot weld drills The twist is smaller than the shank which is 8.0mm and has a flat spot on it to be tightened into our DF-15 series...

Description:

Also known as: DENDFSPD48L, DFXDFSPD48L; Features and Benefits: This optional C-clamp for the Spot Annihilator allows the technician to bring the drilling point three inches into the panel Conveniently fits inside the deluxe case Light enough to use...