dodge front hub puller

OTC Tools (OTC7208A) Front Hub Puller with Spare Locknut # 7208A

Also known as: OTC-7208A, OTC7208A; The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.

OTC 6290 Front Hub Puller,screw Size 1 1/8-7

Front Hub Puller, Max. Spread 8 In., Min. Spread 5 1/2 In., Screw Size 1 1/8-7, Screw Width 7, Removes Front Hub Assembly, Services Most 1/2, 3/4-, And 1-ton Gm 1988-2000 Trucks, 1994-2000 Dodge Rams, 1997- 2000 Fords, And 1985-2001 Jeep Ch...

OTC Tools (OTC4579) Stinger 9 Way Slide Hammer Puller Set # 4579

Also known as: OTC-4579, OTC4579; Features and Benefits Internal and External Jaws provide a variety of combinations to pull bearings, gears and seals Pulls Flange-type rear axle and most front wheel drive hubs Set includes grip wrench adap...

OTC 6298 Front Hub Installer & Puller Set

Includes: OTC-7208A – Hub remover to push the axle shaft from the front hub. OTC-7135A – Installer is used to pull the axle shaft into the front hubs on Ford vehicles. Fits axle shafts with 20mm X 1.5 thread. OTC-7924A – Installer is used t...

OTC 7901 Front Hub Puller,screw Size 5/8-18

Front Hub Puller, Max. Spread 8 In., Min. Spread 8 In., Screw Size 5/8-18, Use W/jaw Or Push Puller No. 5mg39, Removes A Front Hub Assembly In 3/4- And 1-ton 4wd Pickups With 8-bolt Hubs, Services 1994 To 2004 Dodge Rams And 1988 To 2004 Fo...

OTC 6298 Front Hub Installer And Puller Set

Front Hub Installer And Puller Set, Pushes Axle Shaft From Front Hub And Pulls Axle Shaft Into Front Hubs On Ford Vehicles, For Servicing Front Wheel Drive Cars With 20mm X 1.5 Thread Axle Shafts, Includes 2tvg7

OTC 7901 Front Hub Puller for 4WD Vehicles

OTC Front Hub Puller for 4WD Vehicles is required for removing a front hub assembly in 3/4- and 1-ton 4WD pickups with 8-bolt hubs. It works on 1994 to 2004 Dodge Ram and 1988 to 2004 Ford and GM. It fits bolt hole pattern 8 x 6.5 inch. It ...

OTC 7208A Front Hub Installer And Puller

Front Hub Installer And Puller, Max. Spread 4 1/2 In., Min. Spread 4 In., Screw Size 5/8-18, Screw Width 5, Use W/jaw Or Push Puller No. 5mf77, Pushes Axle Shaft From Front Hub And Pulls Axle Shaft Into Front Hubs On Ford Vehicles, For Serv...

OTC Tools (OTC7901) Front Hub Puller for 4 WD Vehicles # 7901

Also known as: OTC-7901, OTC7901; Features and Benefits: Fits bolt hole pattern 8 x 6.5" Will not work on trucks with dual rear wheels Use with 7703 10-lb. slide hammer for maximum pulling force  This puller is required for removing a front...

OTC Tools (OTC6298) Front Hub Installer & Puller Set # 6298

Also known as: OTC-6298, OTC6298; Includes: OTC-7208A Hub remover to push the axle shaft from the front hub OTC-7135A Installer is used to pull the axle shaft into the front hubs on Ford vehicles. Fits axle shafts with 20mm X 1.5 thread. OT...

Cal-Van Tools 526 Flange Type Axle and Front Wheel Hub Puller

Cal-Van Tools Flange Type Axle and Front Wheel Hub Puller can be used on domestic and import cars and light trucks. The range is 3-3/4 inch to 4-1/2 inch. It can be used on 4,5, or 6 bolt stud design. It has all non-C lock GM axles. It may ...

Performance Tool Hub Puller and Installer Set, Model# W89324

The Performance Tool hub puller and installer set can be used on most front wheel drive vehicles. Single, Pair, or Set: Set, Vehicle Make: Universal, Common Usage: Hub puller and installer, Works W...

OTC 7901 Front Hub Puller for 4WD Vehicles

OTC Front Hub Puller for 4WD Vehicles is required for removing a front hub assembly in 3/4- and 1-ton 4WD pickups with 8-bolt hubs. It works on 1994 to 2004 Dodge Ram and 1988 to 2004 Ford and GM. It fits bolt hole pattern 8 x 6.5 inch. It ...

Otc 6298 Front Hub Installer And Puller Set

OTC 6298 Front Hub Installer and Puller Set Condition: New Product Description Description: Features and Benefits: Set contains three popular tools needed when servicing the axle shaft or front hub on front wheel drive vehicles Set includes...

Specialty Products Company 498 Front Hub and Axle Puller

Specialty Products Company (SPC) Front Hub and Axle Puller removes front hubs on vehicles with independent front suspensions. Remove the screw and use it with 499 axle puller to remove axles in compact cars. The set includes 498-1 Yoke, 498...

CTA Tools 4300 Front Wheel Hub Puller Tool

CTA Manufacturing 4300 Front Wheel Hub Puller Tool separates the FWD hub/steering knuckle from the drive axle on vehicles having independent front suspension. Includes 3/4-Inch hex drive center screw with jam nut, for use with slide hammer.

Front Hub Puller With Spare Locknut Otc-7208a

Front Hub Puller with Spare Locknut No. OTC-7208A Front Hub Puller with Spare Locknut Front Hub Puller with Spare Locknut Features: The OTC-7208A puller removes front hubs without damaging the wheel bearing. Its universal design fits most F...

Front Wheel Hub Remover Tool Rear Axle Flange Puller

hammers pullers extractors type pullers

Specialty Products Company 498-3 Jam Nut for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company (SPC) 498-3 Jam Nut for Front Hub and Axle Puller. The Front Hub and Axle Puller removes front hubs on vehicles with independent front suspensions. Remove the screw and use it with 499 axle puller to remove axles ...

OTC 6290 Front Hub Puller for 4WD Vehicles

For removal of the front hub assembly, necessary for wheel bearing or brake rotor service. Provides the mechanical advantage and straight pull not possible with a slide hammer. Services: 1988-2000 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Taho...

OTC 7208A Front Hub Installer and Puller

The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.

Specialty Products Company 498-2 Center Screw for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company (SPC) 498-2 Center Screw for Front Hub and Axle Puller (Part: 498) Center Screw for Front Hub and Axle Puller (Part: 498). The Front Hub and Axle Puller removes front hubs on vehicles with independent front suspen...

OTC 6298 Front Hub Installer and Puller Set

Tools that make front hub service easier. The universal puller removes front hubs from most FWD cars without damaging wheel bearings. The installer is used to pull the axle shaft into the front hub on Ford vehicles. Spare locknut works with...

OTC 6298 Front Hub Installer and Puller Set

Tools that make front hub service easier. The universal puller removes front hubs from most FWD cars without damaging wheel bearings. The installer is used to pull the axle shaft into the front hub on Ford vehicles. Spare locknut works with...

Otc 7901 Front Hub Puller For 4wd Vehicles

OTC 7901 Front Hub Puller for 4WD Vehicles Condition: New Product Description Description: Features and Benefits: Fits bolt hole pattern 8 x 6.5-Inch Will not work on trucks with dual rear wheels Use with 7703 10-pound slide hammer for maxi...

OTC 7208A Front Hub Installer and Puller

The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.

Specialty Products Company 498-2 Center Screw for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company (SPC) 498-2 Center Screw for Front Hub and Axle Puller (Part: 498) Center Screw for Front Hub and Axle Puller (Part: 498). The Front Hub and Axle Puller removes front hubs on vehicles with independent front suspen...

OEM Front Wheel Drive Hub Puller

Item 27037: OEM Front Wheel Drive Hub Puller. . Use with OEM Slide Hammer 27033. Fits most domestic and import vehicles with independant front wheel suspension. Yoke and bolt are threaded 5/8"" x 18

OTC 6290 Front Hub Puller for 4WD Vehicles

For removal of the front hub assembly, necessary for wheel bearing or brake rotor service. Provides the mechanical advantage and straight pull not possible with a slide hammer. Services: 1988-2000 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Taho...

Performance Tool Hub Puller And Installer Set W89324

Performance Tool Hub Puller and Installer Set #W89324 Northern Tool Item# 9094293 Item Weight: 7 lb(s) Product Information: New The Performance Tool hub puller and installer set can be used on most front wheel drive vehicles. Single, Pair, ...