You're in Automotive

Narrow Search Results

JIMS Main Seal Tool

JIMS Main Seal Tool

Used to install and remove transmission main seal Pushes seal in as flat and straight as possibly to .050" below housing for a no leak fit Use 910-363 for 1977-86 4 speed Use 620-188 for 1980-84 5 speed Use 620-189 for 1985-06 5 speed (exc. '06 Dyna)... more

$279.99

FREE shipping

go to store
(50,000+)
JIMS Transmission Main Drive Gear Tool

JIMS Transmission Main Drive Gear Tool

Use to remove the larger 2-1/4" hex nut form the end of main drive gear, which secures the rear drive transmission pulley Very safe and easy to use Accepts 1/2" drive tool white/black One Size Fits Most JIMS Transmission Main Drive Gear Tool Great for... more

$189.99

FREE shipping

go to store
(50,000+)
V-Twin 16-0326 - Jims Flywheel Holding Tool

V-Twin 16-0326 - Jims Flywheel Holding Tool

16-0326 Jims flywheel holding tool is used to hold flywheel assembly in vise with or without left case attached.Can also be used to check case clearance on stroker flywheels. Fits Models: FXD 2006-UPFXST 2007-UPFLST 2007-UPFLT 2007-UP more

$93.48

FREE shipping

go to store
V-Twin 16-0666 - Jims Hard Cap Tool

V-Twin 16-0666 - Jims Hard Cap Tool

16-0666 Jims hard cap tool protects shaft when using press. Fits Models: FL 1955-1984FX 1971-1984FXST 1984-UPFLT 1979-UPFLST 1986-UPFXD 1991-UP more

$49.12

FREE shipping

go to store
Brand New Jims Usa JIM962 Balancer Shaft/Bearing Installer Tool

Brand New Jims Usa JIM962 Balancer Shaft/Bearing Installer Tool

Descriptions Friendly Tip: The price is for Single Item. The item sold Separately. BALANCER SHAFT/BEARING INSTALLER TOOL more

$115.85

FREE shipping

go to store
JIMS Diaphragm Clutch Spring Compressor Tool

JIMS Diaphragm Clutch Spring Compressor Tool

Compresses clutch spring Used to release clutch spring for ease of retainer ring removal and installation white/black One Size Fits Most JIMS Diaphragm Clutch Spring Compressor Tool Great for gifting during the holiday season. more

$117.99

go to store
(50,000+)
JIMS Pulley Lock Tool

JIMS Pulley Lock Tool

Use to lock the final drive sprocket when removing and installing the sprocket nut Parts available separately Instructions included white/black One Size Fits Most JIMS Pulley Lock Tool Great for gifting during the holiday season. more

$164.99

FREE shipping

go to store
(50,000+)
V-Twin 16-0327 - Jims Primary Locking Tool

V-Twin 16-0327 - Jims Primary Locking Tool

16-0327 Jims primary locking tool is used to lock primary for service work. Fits Models: FLT 2007-UP more

$58.77

FREE shipping

go to store
V-Twin 16-0329 - Jims Axle Locker Tool

V-Twin 16-0329 - Jims Axle Locker Tool

16-0329 Jims axle locker tool holds the left side welded axle nut.To use this tool place it over the welded nut on the left side with the neck portion of tool resting over the swing arm. Hand screw the adjusting screw to take up any slack in. Torque... more

$66.18

FREE shipping

go to store
Northern Tool Stainless Steel Door Underbody Toolbox - 48 Inch, Black

Northern Tool Stainless Steel Door Underbody Toolbox - 48 Inch, Black

Free Gift Card w/ Order

Heavy-duty steel underbody truckbox has a corrosion-resistant, polished stainless steel door and a black powder-coated box. Stainless folding T-handle latch keeps gear secure. Recessed door with automotive seal keeps moisture out. U.S.A. Dimensions L x... more

$349.99

go to store
(25,000+)
Northern Tool + Equipment Stainless Steel Door Underbody Toolbox - 36 Inch, Black

Northern Tool + Equipment Stainless Steel Door Underbody Toolbox - 36 Inch, Black

Free Gift Card w/ Order

Heavy-duty Northern Tool + Equipment steel underbody toolbox has a corrosion-resistant, polished stainless steel door and hinge, plus a black powder-coated box. Body Material Steel, Dimensions L x W x H in. 36 x 18 x 18, Lock Included Yes, Body Finish... more

$279.99

go to store
(25,000+)
JIMS Breather Reamer Tool

JIMS Breather Reamer Tool

Repairs damaged engine case breather holes Allows for use of a .030" oversized breather gear Repairs bad breather holes in less than one hour white/black One Size Fits Most JIMS Breather Reamer Tool Great for gifting during the holiday season. more

$881.99

FREE shipping

go to store
(50,000+)
JIMS Cam Chain Tensioner Tool

JIMS Cam Chain Tensioner Tool

Used to unload pressure on primary and secondary chain tensioners Needed for assembly and disassembly of cams Also checks spring loads on chain tensioners white/black One Size Fits Most JIMS Cam Chain Tensioner Tool Great for gifting during the holiday... more

$51.99

go to store
(50,000+)
JIMS Swingarm Bushing Assembly Tool

JIMS Swingarm Bushing Assembly Tool

Used to remove and replace swingarm cleveblocks Applies pressure evenly to the bushing's outer sleeve preventing damage Use with or without a press Includes lube white/black One Size Fits Most JIMS Swingarm Bushing Assembly Tool Great for gifting... more

$239.99

FREE shipping

go to store
(50,000+)
V-Twin 16-0325 - Jims Flywheel Truing Tool

V-Twin 16-0325 - Jims Flywheel Truing Tool

16-0325 Jims flywheel truing tool is to tune flywheel assemblies when truing.This tool features both a flywheel expander and contractor in one easy to use package. Use on all tapered shaft flywheel assemblies. Fits Models: All models more

$503.86

FREE shipping

go to store
V-Twin 16-1805 - Jims Clutch Compressor Tool

V-Twin 16-1805 - Jims Clutch Compressor Tool

16-1805 OEM: 38515-90 The Jims compressor tool features access windows to ease the removal and installation of the snap ring. Fits Models: FXST 1990-UPFLST 1990-UPFLT 1990-UPFXR 1990-1994FXD 1991-UP more

$110.51

FREE shipping

go to store
Jims Hydraulic Balancer Retainer Tool For 00-15 Twin Cam 'B' Motors 779, Black

Jims Hydraulic Balancer Retainer Tool For 00-15 Twin Cam 'B' Motors 779, Black

Use these retainers to hold the hydraulic chain tensioners in place when repairing all Beta engines Must have tool for proper assembly or disassembly of the beta engine balancer system This Item Fits the Following Applications: 2012-2013 Harley... more

$37.29

FREE shipping

go to store
V-Twin 16-0152 - Jims Piston Pin Bushing Tool, bronze

V-Twin 16-0152 - Jims Piston Pin Bushing Tool, bronze

16-0152 OEM: 95970-32 Jims piston pin bushing tool will remove and install bronze bushings. Fits Models: EL 1936-1940UL 1937-1948VL 1932-1934FL 1941-1984FX 1971-1984XL 1957-UPFXST 1984-UPFLST 1986-UPFXD 1991-UPFXR 1982-1994FLT 1979-UP more

$121.19

FREE shipping

go to store
JIMS Main Drive Gear Tool

JIMS Main Drive Gear Tool

Used to remove and install main drive gear Installs main bearing without removing transmission case Will not damage bearing or main drive gear during installation white/black One Size Fits Most JIMS Main Drive Gear Tool Great for gifting during the... more

$242.99

FREE shipping

go to store
(50,000+)
JIMS Piston Pin Bushing Tool

JIMS Piston Pin Bushing Tool

Makes it easy to remove and install rod bushings on all Harley models Complete instructions guide you through removal, selection of new bushing with the proper clearance, and installation white/black One Size Fits Most JIMS Piston Pin Bushing Tool... more

$134.99

go to store
(50,000+)
JIMS Cam Bearing Installation Tool for Twin Cam

JIMS Cam Bearing Installation Tool for Twin Cam

Use to press-in the two inner cam bearings Designed to press from letter side of the inner cam bearings by putting all the pushing pressure to the very outer wall of the bearing shell Eliminates damage to the bearings, cam and cases Stops at the case... more

$210.99

FREE shipping

go to store
(50,000+)
JIMS Fork Stem Bearing Remover Tool

JIMS Fork Stem Bearing Remover Tool

Removes lower fork stem tapered bearing For use on all lower fork stems that use 48300-60 OEM-style bearing Order 910-990 hard end cap when using on 1978-81 XL white/black One Size Fits Most JIMS Fork Stem Bearing Remover Tool Great for gifting during... more

$144.99

go to store
(50,000+)
V-Twin 16-0659 - Jims Pin Gear Lock Tool

V-Twin 16-0659 - Jims Pin Gear Lock Tool

16-0659 Jims pin gear lock tool is used when applying torque to the pinion nut.Align underneath gear and screw into case. Fits Models: FL 1954-1984FX 1971-1984FXST 1984-1998FLST 1986-1998FLT 1979-1998FXR 1982-1994FXD 1991-1998 more

$135.49

FREE shipping

go to store
V-Twin 16-1839 - Jims Crank Assembly Removal Tool

V-Twin 16-1839 - Jims Crank Assembly Removal Tool

16-1839 This removal tool is used to press flywheels from cases, press cases apart and break the sealant bond easily and safely. Fits models: all models more

$218.02

FREE shipping

go to store
V-Twin 16-1282 - Jims Cam Gear Alignment Tool

V-Twin 16-1282 - Jims Cam Gear Alignment Tool

16-1282 This alignment tool is designed to index the cam gears position while removing on installing the cam gear. You will be able to accurately position the cam gear from one camshaft to another. Fits Models: FL 1970-1984FX 1971-1984FXR 1982-1994FXST... more

$286.89

FREE shipping

go to store
V-Twin 16-0162 - Jims Pinion Gear Puller Tool

V-Twin 16-0162 - Jims Pinion Gear Puller Tool

16-0162 OEM: 96830-51 Jims brand pinion gear puller tool is used to remove and install pinion gear.Can be used to install gear on 1951-1953 Big Twin 61in and 74in overhead valve. Fits Models: EL 1939-1940XL 1967-1976FL 1941-1984FX 1971-1984FXR... more

$237.57

FREE shipping

go to store
V-Twin 16-0675 - Jims Cam Seal Installer Tool

V-Twin 16-0675 - Jims Cam Seal Installer Tool

16-0675 Jims cam seal installer tool can be used to remove or install seal. Also removes cover from case. Tool is very simply to use. Mount tool in cover, screw in the 2 removing screws, turn center and the cam seal comes out. The new seal is pressed... more

$130.15

FREE shipping

go to store
V-Twin 16-1838 - Jims Rod Race Press Tool

V-Twin 16-1838 - Jims Rod Race Press Tool

16-1838 The Jims rod race press tool makes for easy installation or extraction of rod races and making it easy to support without bending rods. Fits Models: EL 1936-1940FL 1941-1984FX 1971-1984FXST 1984-1998FLST 1986-1998FXD 1991-1998FXR 1982-1994FLT... more

$187.64

FREE shipping

go to store
V-Twin 16-0684 - Jims Cam Bearing Gauges Tool

V-Twin 16-0684 - Jims Cam Bearing Gauges Tool

16-0684 OEM: 2249 Jims go-no-go cam bearing gauge tool is the only accurate way to check the size of the inside diameter of your inner cam bearing.Use pins to check if your cam is to tight or to loose. Sold as a pair. Fits Models: FL 1958-1984FX... more

$78.29

FREE shipping

go to store
JIMS Cam/Crank Sprocket Lock Tool

JIMS Cam/Crank Sprocket Lock Tool

Designed to lock the cam when removing, replacing, and torquing sprocket bolt Made from non-marring Delrin Includes instructions white/black One Size Fits Most JIMS Cam/Crank Sprocket Lock Tool Great for gifting during the holiday season. more

$53.99

go to store
(50,000+)
V-Twin 16-0384 - Jims Pushrod Cover Clip Tool, black

V-Twin 16-0384 - Jims Pushrod Cover Clip Tool, black

16-0384 Allows the installation and removal of pushrod tube clips. Made of black delrin, this tool will not slip on main pushrod cover clips. Fits models: el 1936-1940 fl 1941-1984 fx 1971-1984 fxst 1984-up flst 1986-up flt 1979-up fxr 1982-1994 fxd... more

$68.17

FREE shipping

go to store
JIMS Inner Cam Bearing Removal Tool

JIMS Inner Cam Bearing Removal Tool

Allows for easy removal of inner cam bearing Insert puller collet into the cam bearing ID, insert dowel pin, place remover body over collet, lube threads and with hand tools the bearing is pulled from case Keeps pin bearings form falling into the... more

$277.99

FREE shipping

go to store
(50,000+)
JIMS Sprocket Shaft Bearing Race Tool

JIMS Sprocket Shaft Bearing Race Tool

Used to remove and install Timken bearing race in motor case Must be used with driver handle 910-155, sold separately white/black One Size Fits Most JIMS Sprocket Shaft Bearing Race Tool Great for gifting during the holiday season. more

$82.99

go to store
(50,000+)
Jims Balancer Shaft Sprocket Alignment Tool For 00-15 Twin Cam 'B' Motors 952

Jims Balancer Shaft Sprocket Alignment Tool For 00-15 Twin Cam 'B' Motors 952

Takes the guesswork out of setting up your balancer shaft sprocket and chain alignment Made in the U.S.A. more

$267.72

FREE shipping

go to store
JIMS Primary Cover Inspection Plug Tool

JIMS Primary Cover Inspection Plug Tool

Used to remove and install the OEM style primary cover clutch adjuster access plug and filler plug without distorting the plug's slot white/black One Size Fits Most JIMS Primary Cover Inspection Plug Tool Great for gifting during the holiday season. more

$25.99

go to store
(50,000+)
JIMS Third Hand Belt Tension Tool

JIMS Third Hand Belt Tension Tool

Attaches to end of axle Use a 1/2" wrench after installing the tool over the axle head Holds axle from spinning while tightening other side Helps get correct belt tension Raw finish white/black One Size Fits Most JIMS Third Hand Belt Tension Tool Great... more

$61.99

go to store
(50,000+)
JIMS Cam Shaft Removal and Installation Tool

JIMS Cam Shaft Removal and Installation Tool

This tool is used to remove and install cams in the support plate with precise alignment It fits and must be used with a hydraulic press Instructions included white/black One Size Fits Most JIMS Cam Shaft Removal and Installation Tool Great for gifting... more

$189.99

FREE shipping

go to store
(50,000+)
JIMS Fork Leg and Tube Holder Tool

JIMS Fork Leg and Tube Holder Tool

Use to hold fork legs and tubes for easy hands-free service or rebuilding Mounts in a vise to hold the fork firmly during repair without causing damage to the fork assembly Will not scratch finishes For use on tubes with a maximum 2" diameter... more

$121.99

go to store
(50,000+)
JIMS Ignition Switch Connector Remover Tool

JIMS Ignition Switch Connector Remover Tool

Safely removes the ignition switch wiring connector Gently extract the male wiring connector and tool CNC-machined from 6061 aluminum and blue anodized white/black One Size Fits Most JIMS Ignition Switch Connector Remover Tool Great for gifting during... more

$122.99

go to store
(50,000+)
JIMS Ignition Switch Alignment Housing Tool

JIMS Ignition Switch Alignment Housing Tool

Aligns the ignition switch housing as retaining screws are being torqued Gives ignition switch knob the alignment it needs to help extend the ignition switch housing CNC-machined from 6061 aluminum and blue anodized white/black One Size Fits Most JIMS... more

$113.99

go to store
(50,000+)

More information about Automotive

Best prices on Jims tool in Automotive online. Visit Bizrate to find the best deals on top brands. Read reviews on Automotive merchants and buy with confidence.