Anderson trailers in Boats, Kayaks & Boating Equipment

Description:

This Anderson Marine Division® trailer light kit provides all lighting and reflective equipment for trailers less than 80-in wide. IIt features tough molded housings and phosphorous bronze electrical contacts. The front side marker lights have built-in...

Description:

This Anderson Marine Division® combination light is an under 80-in submersible tail light with gasketed lenses to provide a seal to prevent water from entering lamp body. These lights exceed DOT requirements for stop, turn signal, tail, rear and side...

Description:

This Anderson Marine Division® trailer light kit provides all lighting and reflective equipment for trailers less than 80-in wide. IIt features tough molded housings and phosphorous bronze electrical contacts. The front side marker lights have built-in...

Description:

The Anderson Marine Division® submersible tail light is a "Belljar" submersible with gasketed lenses to provide a seal that prevents water from entering the lamp. The kit includes left and right tail lights, two 108WA marker lights, a license bracket,...

Description:

The Anderson Marine Division® submersible tail light is a "Belljar" submersible with gasketed lenses to provide a seal that prevents water from entering the lamp. The kit includes left and right tail lights, two 108WA marker lights, a license bracket,...

Description:

Description:

MPN: V5416 7-Way Round To 4-Way Flat Converts 7-way round pin connector to 4-way flat connector. Easily adapts tow vehicle connector to trailer connector. Full length plug shell ensures positive latching. Features non-corrosive nylon shell. ANDERSON...

Description:

SUB TRAILER LIGHT KIT: Deluxe. Patented air trapping bottom access design keeps water, salt, and dirt from entering the light chamber thus eliminating runaway corrosion and bulb popping. Lexan construction assures long life. Meets all federal DOT...

Description:

Trailer side, flat Male, 12 color coded lead wire - TRAILER CONNECTOR: For 6V, 12V, and 24V applications. 4-pole shrouded connector. Made in U.S.A.

Description:

Anderson E150-3 Marine-Trailer Submersible Identification Light Bar Features three 150 sealed lights on a black ABS plastic bar. Complete wire harness included. Red only. OAL: 17".

Description:

Designed to attach harness to the trailer frame.

Description:

Converts 4-pole round pin connector to 4-pole flat pin connector. Easily adapts tow vehicle connector to trailer connector.

Description:

Square shrouded connector, trunk side, flat Female, 48 color coded wire - CAR SIDE CONNECTOR: For 6V, 12V, and 24V applications. 4-pole shrouded connector. Made in U.S.A.

Description:

TRAILER KIT W/LIGHT: Mets D.O.T. requirements. Kit includes: 2 tail lights, 1 wiring harness, 1 license plate bracket, and 2 side marker lights.

Description:

Anderson Marine 7 - way Round to 5 - way Flat Adapter. Easily converts your 7-way round blade connector to a 4-way flat pin connector! Adapts tow vehicle connector to trailer connector. Full-length plug ensures positive latching. Features a...

Description:

Andersons 164 kits feature a round, 2, sealed, LED light that functions as a clearance, side marker, or identification light. Contained in a sealed, polycarbonated lens and housing Operates from 8 - 16 volts Kits include 164 LED light, 146-18 mounting...

Description:

Andersons 164 kits feature a round, 2, sealed, LED light that functions as a clearance, side marker, or identification light. Contained in a sealed, polycarbonated lens and housing Operates from 8 - 16 volts Kits include 164 LED light, 146-18 mounting...

Description:

Flat 4-way Trailer Connector with 12" lead wires. Color-coded wire meets SAE J1128 specifications and plug meets SAE J1239. Handy boating necessities for less! Order yours ONLINE today! Please Note : This item is shipped directly from the factory. To...

Description:

Flat 5-way Trailer Connector with 12" lead wires. Blue fifth wire may be used as an auxiliary circuit for lights or brakes. Color-coded wire meets SAE J1128 specifications and plug meets SAE J1239. Handy boating necessities for less! Order yours ONLINE...

Description:

Andersons low profile, over 80 submersible combination tail light features stop, tail, rear clearance, rear reflex, side marker and side reflex funtions. E456L includes a license illumination light. Housing slides out for easy maintenance and bulb...

Description:

Andersons low profile, over 80 submersible combination tail light features stop, tail, rear clearance, rear reflex, side marker and side reflex funtions. E456L includes a license illumination light. Housing slides out for easy maintenance and bulb...

Description:

Andersons under 80 submersible combination curbsideroadside tail light kits includes stop, turn, tail, rear reflex, side marker and side reflex. The E441L has an added feature of a license illuminator. Gaskets on both rear and side lenses Brown and...

Description:

Andersons under 80 submersible combination curbsideroadside tail light kits includes stop, turn, tail, rear reflex, side marker and side reflex. The E441L has an added feature of a license illuminator. Gaskets on both rear and side lenses Brown and...

Description:

Black polycarbonate bar is corrosion proof and unbreakable with three 150R sealed lights attached. For trailers 80 or wider 150R red light units are replaceable without disassembly Mounts on 16 centers and has separate ground wire Includes three-plug...

Description:

May be used with the 416, 421, 420, 423 series oval tail lights and with other similar competitors lights Bolt on or weld in either the horizontal or vertical position Black enamel steel finish

Description:

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 - 16 volts Hard-wire with separate lead and ground wires for mounting to all surfaces Mounts on 1- 15/16 centers or with optional mounting bracket on 1-18...

Description:

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 - 16 volts Hard-wire with separate lead and ground wires for mounting to all surfaces Mounts on 1- 15/16 centers or with optional mounting bracket on 1-18...

Description:

Black polycarbonate bar is corrosion proof and unbreakable with three 150R sealed lights attached. For trailers 80 or wider 150R red light units are replaceable without disassembly Mounts on 16 centers and has separate ground wire Includes three-plug...

Description:

Sealed, oval stopturntail light is a single unit made of polycarbonate lens sonic welded to the housing. Horizontal or vertical mount Kit includes light, grommet and right angle plug 12 volt lamps designed with the dual-filament, 2.1.59 amp and 323 cp...

Description:

Andersons oval, 7-diode LED stop, turn, and tail light meets FMVSS 108 in any 360 position. Operates from 8 - 16 volts Available in grommet or flange mount models Light includes two lead wires and ground wire with #10 ring terminal Kit includes 420-3...