You're in Building Supplies

Narrow Search Results

  • Price Range

    $ to $
    Update>>
  • By Keyword

    THREADED HANDLE - 1 3/8"" ALUM - 6';

    THREADED HANDLE - 1 3/8"" ALUM - 6';

    $28.00

    go to store
    EDGER - BS 6"" x 4"" - 3/8"" RAD 1/2"" LIP CG HDL

    EDGER - BS 6"" x 4"" - 3/8"" RAD 1/2"" LIP CG HDL

    Flex to the right feel when edging Comfort grip handle more

    $7.60

    go to store
    EDGER - BS 6"" x 4"" - 3/4"" RAD 7/8"" LIP CG HDL

    EDGER - BS 6"" x 4"" - 3/4"" RAD 7/8"" LIP CG HDL

    Flex to the right feel when edging Comfort grip handle more

    $7.60

    go to store
    CONCRETE PLACER - REINFORCED STEEL WITHOUT HOOK

    CONCRETE PLACER - REINFORCED STEEL WITHOUT HOOK

    Without hook Handle sold separately, use # 12-844 or 12-404 more

    $15.25

    go to store
    EDGER - BRONZE 6"" x 3"" - 3/4"" RAD x 3/4"" LIP WD HDL

    EDGER - BRONZE 6"" x 3"" - 3/4"" RAD x 3/4"" LIP WD HDL

    3/4""d x 3/4""r Both ends of these edges are turned up Won';t dig into concrete Radius side has a flat outside rail to run along forms more

    $33.00

    go to store
    FINISH TROWEL - CS 14"" x 4"" - CAMEL WD HDL

    FINISH TROWEL - CS 14"" x 4"" - CAMEL WD HDL

    Lightweight and long lasting, professionally designed for all your concrete finishing requirements All rivets are factory-ground for a smooth blade more

    $31.75

    go to store
    FINISH TROWEL - BS 16"" x 4"" - CAMEL WD HDL

    FINISH TROWEL - BS 16"" x 4"" - CAMEL WD HDL

    Made from flexible, strong blue steel, gives more ""life"" to concrete finishing more

    $35.85

    go to store
    FINISH TROWEL - CS 16"" x 4"" - CG HDL

    FINISH TROWEL - CS 16"" x 4"" - CG HDL

    Square end, long shank Carbon steel blade is attached with rivet and factory cross ground for ""perfect feel"" Die cast aluminum mounting is fitted with an ergonomically designed comfort grip handle that reduces fatigue more

    $23.35

    go to store
    SWIM POOL TROWEL - 18"" x 4"" - LONG SHANK CG HDL

    SWIM POOL TROWEL - 18"" x 4"" - LONG SHANK CG HDL

    Round end, long shank Carbon steel blade is attached with rivet and factory cross gound for ""perfect feel"" Die cast aluminum mounting is fitted with an ergonomically designed comfort grip handle that reduces fatigue more

    $25.60

    go to store
    FINISH TROWEL - CS 18"" x 4"" - CG HDL

    FINISH TROWEL - CS 18"" x 4"" - CG HDL

    Square end, long shank Carbon steel blade is attached with rivet and factory cross grund for ""perfect feel"" Die cast aluminum mounting is fitted with an ergonomically designed comfort grip handle that reduces fatigue more

    $24.30

    go to store
    GROOVER - BRONZE 6"" x 4 1/2"" BIT 3/4"" x 7/8"" CG HDL

    GROOVER - BRONZE 6"" x 4 1/2"" BIT 3/4"" x 7/8"" CG HDL

    Made thicker for more wear Matching walking tools available Wear resistant alloy Bit size 3/4""d x 7/8"" more

    $40.00

    go to store
    GROOVER - BRONZE 6"" x 4 1/2"" BIT 1"" x 1/2"" WD HDL

    GROOVER - BRONZE 6"" x 4 1/2"" BIT 1"" x 1/2"" WD HDL

    Made thicker for more wear Matching walking tools available Wear resistant alloy Bit size 1""d x 1/2""w more

    $39.00

    go to store
    EDGER - BRONZE 9"" x 4"" - 1/4"" RAD x 3/4"" LIP WD HDL

    EDGER - BRONZE 9"" x 4"" - 1/4"" RAD x 3/4"" LIP WD HDL

    Lip size is 3/4""diameter x 1/4"" radius Matches walking edger # 12-283 more

    $53.35

    go to store
    CONCRETE PLACER - ALUM NO HOOK - 60"" ALUM HDL

    CONCRETE PLACER - ALUM NO HOOK - 60"" ALUM HDL

    $27.75

    go to store
    FLOAT HANDLE - WOOD 10"" W/O HOLES

    FLOAT HANDLE - WOOD 10"" W/O HOLES

    $3.60

    go to store
    CONCRETE PLACER - WITH HOOK

    CONCRETE PLACER - WITH HOOK

    With hook Handle sold separately, use # 12-844 or 12-404 more

    $12.95

    go to store
    CONCRETE PLACER - STEEL WITH HOOK

    CONCRETE PLACER - STEEL WITH HOOK

    With hook Handle sold separately, use #12-844-B9 or #12-404-B9 more

    $11.90

    go to store
    T BRUSH BASE ADAPTER - ALUM

    T BRUSH BASE ADAPTER - ALUM

    Complete with hardware more

    $4.75

    go to store
    IRONOXX - 722 BLACK - 10 LB

    IRONOXX - 722 BLACK - 10 LB

    Synthetic iron oxide pigmented concrete coloring Available in 10 and 25 lb bags, which can be added directly into the concrete mix Variations in the mix design, mixing time, and curing conditions, will affect the final color<li more

    $26.65

    go to store
    IRONOXX - 722 BLACK - 25 LB

    IRONOXX - 722 BLACK - 25 LB

    Synthetic iron oxide pigmented concrete coloring Available in 10 and 25 lb bags, which can be added directly into the concrete mix Variations in the mix design, mixing time, and curing conditions, will affect the final color<li more

    $65.40

    go to store
    SPRAY GUN FOR FLAT WORK

    SPRAY GUN FOR FLAT WORK

    One piece, die cast aluminum body with an air regulator valve Has larger trigger, better positioned air hose; larger capacity hopper hanging hole, etc Three nozzle sizes included: 4mm, 6mm, 6mm Use for flat work 8 more

    $95.50

    go to store
    MUD PAN - PLASTIC 12""

    MUD PAN - PLASTIC 12""

    Resists heat, cold and most chemical Lightweight and reinforced Made of styrene Steel blade for cleaning knife more

    $5.65

    go to store
    MUD PAN - SS 14""

    MUD PAN - SS 14""

    Heavy duty, long lasting and resists rusting Sheared edge cleans knife quickly Water tight seams more

    $18.65

    go to store
    JOINT KNIFE- CARBON STEEL 4"" - POLY HDL

    JOINT KNIFE- CARBON STEEL 4"" - POLY HDL

    Flexible high carbon steel blade High impact plastic hammer head handle equipped with brass nailing head to set protruding drywall nails Order quantities of 18 and receive a free display box more

    $8.55

    go to store
    WALL SANDER - MALE THREAD - CAST ALUM

    WALL SANDER - MALE THREAD - CAST ALUM

    Base plate has reinforcing ridges to prevent ""bowing"" Rubber pad is epoxy bonded Wide positive locks hold several sheets of sandpaper firmly in place Use die cut sandpaper Handle sold separately < more

    $17.50

    go to store
    CORNER TROWEL - INSIDE SS 5"" x 4 1/4"" x 4-1/4""- WD HDL

    CORNER TROWEL - INSIDE SS 5"" x 4 1/4"" x 4-1/4""- WD HDL

    One piece lightweight, flexible stainless steel 103 degree angle flexes to 90 degree Blades taper from 5"" long at center to 4 1/4"" long at outside edge more

    $12.80

    go to store
    SPEEDY MIXER - CADMIUM 8"" x 4 1/2"" - 36"" SHAFT

    SPEEDY MIXER - CADMIUM 8"" x 4 1/2"" - 36"" SHAFT

    Cadium plated /will mix in any container up to gallon drum 7/16"" hex shaft will fit 1/2"" drill Paddle folds materials in an inside-out pattern quickly, with a minimum of air Shaft is 7/16"" x 36"" more

    $15.90

    go to store
    TAPING KNIFE - SS 10"" x 3"" - 7"" WD HDL

    TAPING KNIFE - SS 10"" x 3"" - 7"" WD HDL

    Flexible, high polished blade securely mounted Contoured 7"" hardwood handle more

    $11.25

    go to store
    WALL SANDER - FEMALE THREAD - CAST ALUM

    WALL SANDER - FEMALE THREAD - CAST ALUM

    Reinforcing ridges to prevent ""bowing"" Rubber pad is epoxy bonded Wide positive locks hold several sheets of sandpaper firmly in place Use die cut sandpaper Handles sold separately, use # 12-329,1 more

    $18.50

    go to store
    T SQUARE - 54"" x 22"" x 2""

    T SQUARE - 54"" x 22"" x 2""

    Made with 3/16"" heavy duty blade to reduce curling and warping Head is made with 3/8"" flanger Blade is reverse ruled for measurement from top to bottom or bottom to top more

    $32.75

    go to store
    SEAM ROLLER - 2"" SQ END

    SEAM ROLLER - 2"" SQ END

    Square ended Polished steel rollers Ball bearings for smooth operation Single arm design 2"" diameter rollers/2"" long more

    $21.50

    go to store
    BULLHORN JOINTER - SS 1/2""

    BULLHORN JOINTER - SS 1/2""

    $18.50

    go to store
    FLAT SLICKER - DOUBLE 1/2"" x 5/8""

    FLAT SLICKER - DOUBLE 1/2"" x 5/8""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    SQUARE BEAD JOINTER - 1/4"" x 3/16"" & 3/8"" x 3/16""

    SQUARE BEAD JOINTER - 1/4"" x 3/16"" & 3/8"" x 3/16""

    Produces a raised square bead joint popular for restoration work. Bead height is 3/16"". Width on one end is 1/4"" and 3/8"" on other end. more

    $31.50

    go to store
    BULLHORN JOINTER - SS 3/4""

    BULLHORN JOINTER - SS 3/4""

    $18.50

    go to store
    FLAT SLICKER - DOUBLE 3/4"" x 7/8""

    FLAT SLICKER - DOUBLE 3/4"" x 7/8""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    FLAT SLICKER - DOUBLE 3/8"" x 1/2""

    FLAT SLICKER - DOUBLE 3/8"" x 1/2""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    BULLHORN JOINTER - 5/8"" HEAVYWEIGHT

    BULLHORN JOINTER - 5/8"" HEAVYWEIGHT

    Use these handy bullhorn jointers to touch up grout lines. more

    $9.45

    go to store

    More information about Building Supplies

    Best prices on Building Supplies in Building Supplies online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.
    Show
    Hide
    Hide