You're in Building Supplies

Narrow Search Results

  • Price Range

    $ to $
    Update>>
  • By Keyword

    IRONOXX - 722 BLACK - 10 LB

    IRONOXX - 722 BLACK - 10 LB

    Synthetic iron oxide pigmented concrete coloring Available in 10 and 25 lb bags, which can be added directly into the concrete mix Variations in the mix design, mixing time, and curing conditions, will affect the final color<li more

    $26.65

    go to store
    IRONOXX - 722 BLACK - 25 LB

    IRONOXX - 722 BLACK - 25 LB

    Synthetic iron oxide pigmented concrete coloring Available in 10 and 25 lb bags, which can be added directly into the concrete mix Variations in the mix design, mixing time, and curing conditions, will affect the final color<li more

    $65.40

    go to store
    SPRAY GUN FOR FLAT WORK

    SPRAY GUN FOR FLAT WORK

    One piece, die cast aluminum body with an air regulator valve Has larger trigger, better positioned air hose; larger capacity hopper hanging hole, etc Three nozzle sizes included: 4mm, 6mm, 6mm Use for flat work 8 more

    $95.50

    go to store
    MUD PAN - PLASTIC 12""

    MUD PAN - PLASTIC 12""

    Resists heat, cold and most chemical Lightweight and reinforced Made of styrene Steel blade for cleaning knife more

    $5.65

    go to store
    MUD PAN - SS 14""

    MUD PAN - SS 14""

    Heavy duty, long lasting and resists rusting Sheared edge cleans knife quickly Water tight seams more

    $18.65

    go to store
    JOINT KNIFE- CARBON STEEL 4"" - POLY HDL

    JOINT KNIFE- CARBON STEEL 4"" - POLY HDL

    Flexible high carbon steel blade High impact plastic hammer head handle equipped with brass nailing head to set protruding drywall nails Order quantities of 18 and receive a free display box more

    $8.55

    go to store
    WALL SANDER - MALE THREAD - CAST ALUM

    WALL SANDER - MALE THREAD - CAST ALUM

    Base plate has reinforcing ridges to prevent ""bowing"" Rubber pad is epoxy bonded Wide positive locks hold several sheets of sandpaper firmly in place Use die cut sandpaper Handle sold separately < more

    $17.50

    go to store
    CORNER TROWEL - INSIDE SS 5"" x 4 1/4"" x 4-1/4""- WD HDL

    CORNER TROWEL - INSIDE SS 5"" x 4 1/4"" x 4-1/4""- WD HDL

    One piece lightweight, flexible stainless steel 103 degree angle flexes to 90 degree Blades taper from 5"" long at center to 4 1/4"" long at outside edge more

    $12.80

    go to store
    SPEEDY MIXER - CADMIUM 8"" x 4 1/2"" - 36"" SHAFT

    SPEEDY MIXER - CADMIUM 8"" x 4 1/2"" - 36"" SHAFT

    Cadium plated /will mix in any container up to gallon drum 7/16"" hex shaft will fit 1/2"" drill Paddle folds materials in an inside-out pattern quickly, with a minimum of air Shaft is 7/16"" x 36"" more

    $15.90

    go to store
    TAPING KNIFE - SS 10"" x 3"" - 7"" WD HDL

    TAPING KNIFE - SS 10"" x 3"" - 7"" WD HDL

    Flexible, high polished blade securely mounted Contoured 7"" hardwood handle more

    $11.25

    go to store
    WALL SANDER - FEMALE THREAD - CAST ALUM

    WALL SANDER - FEMALE THREAD - CAST ALUM

    Reinforcing ridges to prevent ""bowing"" Rubber pad is epoxy bonded Wide positive locks hold several sheets of sandpaper firmly in place Use die cut sandpaper Handles sold separately, use # 12-329,1 more

    $18.50

    go to store
    T SQUARE - 54"" x 22"" x 2""

    T SQUARE - 54"" x 22"" x 2""

    Made with 3/16"" heavy duty blade to reduce curling and warping Head is made with 3/8"" flanger Blade is reverse ruled for measurement from top to bottom or bottom to top more

    $32.75

    go to store
    SEAM ROLLER - 2"" SQ END

    SEAM ROLLER - 2"" SQ END

    Square ended Polished steel rollers Ball bearings for smooth operation Single arm design 2"" diameter rollers/2"" long more

    $21.50

    go to store
    BULLHORN JOINTER - SS 1/2""

    BULLHORN JOINTER - SS 1/2""

    $18.50

    go to store
    FLAT SLICKER - DOUBLE 1/2"" x 5/8""

    FLAT SLICKER - DOUBLE 1/2"" x 5/8""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    SQUARE BEAD JOINTER - 1/4"" x 3/16"" & 3/8"" x 3/16""

    SQUARE BEAD JOINTER - 1/4"" x 3/16"" & 3/8"" x 3/16""

    Produces a raised square bead joint popular for restoration work. Bead height is 3/16"". Width on one end is 1/4"" and 3/8"" on other end. more

    $31.50

    go to store
    BULLHORN JOINTER - SS 3/4""

    BULLHORN JOINTER - SS 3/4""

    $18.50

    go to store
    FLAT SLICKER - DOUBLE 3/4"" x 7/8""

    FLAT SLICKER - DOUBLE 3/4"" x 7/8""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    FLAT SLICKER - DOUBLE 3/8"" x 1/2""

    FLAT SLICKER - DOUBLE 3/8"" x 1/2""

    Made of hardened high carbon steel, 1/8"" thick. The ends are different sizes for different joints. more

    $11.25

    go to store
    BULLHORN JOINTER - 5/8"" HEAVYWEIGHT

    BULLHORN JOINTER - 5/8"" HEAVYWEIGHT

    Use these handy bullhorn jointers to touch up grout lines. more

    $9.45

    go to store
    CONVEX JOINTER - 5/8"" x 3/4"" M

    CONVEX JOINTER - 5/8"" x 3/4"" M

    For half round, rodded or sunken goints. Heavy guage steel. Each end makes a different size joint. more

    $6.75

    go to store
    BULLHORN JOINTER - SS 7/8""

    BULLHORN JOINTER - SS 7/8""

    $18.50

    go to store
    MARGIN TROWEL - CS 8"" x 2"" CG HDL

    MARGIN TROWEL - CS 8"" x 2"" CG HDL

    Precision-forged from high-quality carbon steel. Flexible and easy to use. more

    $13.35

    go to store
    LINESTRETCHERS - 6"" TO 8"" - (PR)

    LINESTRETCHERS - 6"" TO 8"" - (PR)

    Raise the line between key courses of blocks and stretch tightly. Cast aluminum. Sold in pairs. more

    $14.75

    go to store
    BARREL JOINTER - BON ALUM W/ STEEL BARRELS

    BARREL JOINTER - BON ALUM W/ STEEL BARRELS

    Cast aluminum jointer with replaceable steel barrels. Comes with one each 1/2"", 5/8"", 3/4"" and 7/8"" barrels. more

    $17.90

    go to store
    BARREL JOINTER - ALUM W/STEEL BARRELS

    BARREL JOINTER - ALUM W/STEEL BARRELS

    Cast aluminum jointer with replaceable steel barrels. Comes with one each 1/2"", 5/8"", 3/4"", and 7/8"" barrels. more

    $24.90

    go to store
    FITTING - INSIDE INTERMEDIATE TOP

    FITTING - INSIDE INTERMEDIATE TOP

    All fittings include hardware more

    $26.75

    go to store
    RULE - FIBERGLASS - MODULAR SPACING - 6';

    RULE - FIBERGLASS - MODULAR SPACING - 6';

    Six different scales on one side; inches, 8ths and 16ths on the other Every joint opens on even numbers Fine for 6"" or 12"" glass blocks Straight grain hardwood. Won';t bend when extended more

    $25.50

    go to store
    LINE - NYLON #15 TWIST - 350'; YELLOW

    LINE - NYLON #15 TWIST - 350'; YELLOW

    This line is specially treated to hold knots. Will not rot or mildew. Tested to 125 lbs. Available in standard colors and Bon Tool';s E-Z-C neon colors. 350 ft. per roll. #15 twist. </u more

    $4.85

    go to store
    LINE - NYLON #15 TWIST - 350'; WHITE

    LINE - NYLON #15 TWIST - 350'; WHITE

    This line is specially treated to hold knots. Will not rot or mildew. Tested to 125 lbs. 350 ft. per roll. #15 twist. more

    $4.85

    go to store
    FILING DUSTER BRUSH

    FILING DUSTER BRUSH

    2 5/8"" Trim 4 x 8 rows Use to clean fluted block more

    $5.95

    go to store
    SCARIFIER - SPRING STEEL TINES - 16""

    SCARIFIER - SPRING STEEL TINES - 16""

    Light, flexible spring steel tines make scratching undercoat easy Scratching the brown coat will keep finish coat from separating more

    $17.15

    go to store
    HAWK - ALUM 12"" x 12"" - WD HDL

    HAWK - ALUM 12"" x 12"" - WD HDL

    $23.70

    go to store
    NOTCH TROWEL - ECONO 1/4"" - PLASTIC HDL

    NOTCH TROWEL - ECONO 1/4"" - PLASTIC HDL

    $2.55

    go to store
    LINE - NYLON #15 TWIST - 500'; YELLOW

    LINE - NYLON #15 TWIST - 500'; YELLOW

    $7.40

    go to store
    MORTAR BOX - POLY 9 CU FT - 58"" x 30"" x 12""

    MORTAR BOX - POLY 9 CU FT - 58"" x 30"" x 12""

    58"" x 30"" x 12"" Hi-molecular polyethylene makes this the strongest poly box available. Springs back from impact. Unaffected by mortar and lime. more

    $135.00

    go to store
    SCAFFOLD PLANK - 7'; x 19""

    SCAFFOLD PLANK - 7'; x 19""

    Built with rugged aluminum under frame and 1/2"" plywood deck. Double thick offset hook and notched deck enable straight-line installation. Side rails have built in edge guards to protect plywood edges. Scaffold p more

    $139.00

    go to store
    CONVEX JOINTER - CARBON STEEL - 5/8"" x 3/4""

    CONVEX JOINTER - CARBON STEEL - 5/8"" x 3/4""

    $10.50

    go to store
    CONCRETE PLACER - LITE ALUM WITH HOOK

    CONCRETE PLACER - LITE ALUM WITH HOOK

    With hook Handle sold separately more

    $13.60

    go to store
    RITE-HEIGHT BRACKET WITH CHAIN

    RITE-HEIGHT BRACKET WITH CHAIN

    Work at comfortable hip height, reduces back strain Float pitch is controlled with a single turn of the handle This bracket works with most 2-hole and 4 hole bull floats, no adapter needed Uses 1 3/4"" and 1 3/8"" more

    $74.00

    go to store

    More information about Building Supplies

    Best prices on Building Supplies in Building Supplies online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.
    Show
    Hide
    Hide