Roof shingles in Building Supplies

Description:

Minimum Order: $2500.00 - This type of smooth sawn architecturally uniform cedar shingle is preferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures.Please Note: For standard...

Description:

Minimum Order: $2500.00 - This type of smooth sawn architecturally uniform cedar shingle is preferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures.Please Note: For standard...

Description:

Senco's XtremePro Nailers are designed for the user who demands quality, performance and reliability. Backed by a 5 year warranty, Senco's XP is the choice of Professionals. Drives .120 shank coil nails from 3/4" to 1-3/4". Use for shingles, tar paper...

Description:

Roof Clips 10 each. The H913 roof clips are used to secure WinterGard Wet and Gardian heating cables to to shingle and metal seam roofs and gutters. The H913 is a bag of 10 clips. 10.00 L. 6.00 W. 2.00 H.

Description:

47.5 SHINGLE REMOVER: StripFast shingle removal shovel is all steel construction ans has been specially designed to perform tough roofing applications. Can be used on fiberglass or asphalt roofing shingles. 16 heat-treated steel teeth. Replaceable...

Description:

7.2X33.5 SHNGL STARTER: Self-adhesive membrane that eliminates the need to cut shingle tabs. Comes with a seal tab to prevent wind uplift at the roof edge. Fast installation and the membrane is waterproof and self-sealing around nails and other...

Description:

7.25" x 36", Gutter Shingle Gutter Cover, Helps Keep Gutters Free-Flowing, Will Handle Any Amount Of Rainfall, Easy To Install 3 Foot Sections Fit 4", 5", 6" K Style Metal Gutters, Blends With Roof Shingle Appearance, Powder Coated, Weathered Wood Look.

Description:

Cobra Ridge Vent Is A Low-Profile, Single-Layer, Non-Fabric Covered, Shingle Over Ridge Vent, On A 20' Coil & 10/12" Wide. Made From Over 90% Recycled Fibers & UV Stable. 3/4" Thick & Rated At 16.9 " Per Lineal Foot Of Net Free Area. Works On Roof...

Description:

* Sturdy, polypropylene construction * Durable, powder-coated steel extension handle * Curved neck reaches over and under gutter hangers-even works with gutters with overhanging shingles from repeated re-roofing * Tip digs into the gutter's corner...

Description:

Cobra Ridge Vent, Is A Low-Profile, Singler Layer, Non-Fabric Cover, Shingle Over Ridge Vent, On 1 20' Coil, 10.5" Wide, 5/8" Thick & Rated at 14.1 SQIN/Linear Foot Of Net Free Area, Works On Roof Pitches 2/1 To 20/20, Has 2 Coils Of 1-3/4" Coil Nails...

Description:

Each "hooks" under your roofing shingles or onto your gutter to hold your smallest LED light string up to larger C7 light strings. You'll need one clip for every 6" of light string. You get 125 clips, enough for 62' of lights.

Description:

Now when snow starts to build-up on your roof, you can prevent shingle and gutter damage, and costly leaks inside your home, by removing the excess snow with our long-reach Snow Rake... easy on your arms! 4' Aluminum Extension only.

Description:

Saturated asphalt coated. Contractor grade repair. Use with asphalt roof cement to repair damaging leaks. Forms a tough patch on damaged shingle, metal, composition, concrete, and other roof types. Will not char, become brittle, rot, or decay. 6" x 150'.

Description:

Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement.

Description:

Cobra Ridge Vent, Is A Low-Profile, Singler Layer, Non-Fabric Cover, Shingle Over Ridge Vent, On 1 20' Coil, 10.5" Wide, 5/8" Thick & Rated at 14.1 SQIN/Linear Foot Of Net Free Area, Works On Roof Pitches 2/1 To 20/20, Has 2 Coils Of 1-3/4" Coil Nails...

Description:

Saturated asphalt coated. Contractor grade repair. Use with asphalt roof cement to repair damaging leaks. Forms a tough patch on damaged shingle, metal, composition, concrete, and other roof types. Will not char, become brittle, rot, or decay. 6" x 150'.

Description:

Gutter Strap Hanger, Use Where Fascia Board Does Not Exist Or Is Not Vertical, Attaches To Roof Under Shingles, Connected To Support Brackets With Screws.

Description:

Genova, Repla-K Gutter Strap Hanger, Use Where Fascia Board Does Not Exist Or Is Not Vertical, Attaches To Roof Under Shingles, Connected To Support Brackets With Screws.

Description:

Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement.

Description:

Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement.

Description:

* Sturdy, polypropylene construction * Durable, powder-coated steel extension handle * Curved neck reaches over and under gutter hangers-even works with gutters with overhanging shingles from repeated re-roofing * Tip digs into the gutter's corner...

Description:

Electro galvanized. Wide head aids holding and reduces pull through. For asphalt shingles, roofing felt, or insulating board. Galvanized to resist weathering. 11 gauge. Packaged in a 30 lb. pail. No. 720960: 1" No. 707923: 1 1 4" No. 707930: 1 1 2" No. 72

Description:

Electro galvanized. Wide head aids holding and reduces pull through. For asphalt shingles, roofing felt, or insulating board. Galvanized to resist weathering. 11 gauge. Packaged in a 30 lb. pail. No. 720960: 1" No. 707923: 1 1 4" No. 707930: 1 1 2" No. 72

Description:

Cobra Ridge Vent Is A Low-Profile, Single-Layer, Non-Fabric Covered, Shingle Over Ridge Vent, On A 20' Coil & 10/12" Wide. Made From Over 90% Recycled Fibers & UV Stable. 3/4" Thick & Rated At 16.9 " Per Lineal Foot Of Net Free Area. Works On Roof...

Description:

.021 nominal thickness. 16 oz. per sq. ft. Uses: Around chimneys, vent pipes, flues, as ridge cap under shingles, roof paper, or valley flashing. No. 67314: 14 x 10 No. 67514: 14 x 25

Description:

Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement.

Description:

* Sturdy, polypropylene construction * Durable, powder-coated steel extension handle * Curved neck reaches over and under gutter hangers-even works with gutters with overhanging shingles from repeated re-roofing * Tip digs into the gutter's corner...

Description:

Electro galvanized. Wide head aids holding and reduces pull through. For asphalt shingles, roofing felt, or insulating board. Galvanized to resist weathering. 11 gauge. Packaged in a 30 lb. pail. No. 720960: 1" No. 707923: 1 1 4" No. 707930: 1 1 2" No. 72

Description:

Electro galvanized. Wide head aids holding and reduces pull through. For asphalt shingles, roofing felt, or insulating board. Galvanized to resist weathering. 11 gauge. Packaged in a 30 lb. pail. No. 720960: 1" No. 707923: 1 1 4" No. 707930: 1 1 2" No. 72

Description:

Black, Aluminum Static Vent, 50 SQIN Net Free Area, Textured Black Painted Finish Adds Strength & Blends With Shingles, Fits Any Roof Pitch, Bird Proof, Large Nailing Flange, Double Beaded Collar With Locking Tabs, Base Dimensions: 15-7/8" x 20-3/8",...