Pac Car Audio / Video Accessories

Description:

Pontiac Grand Prix 00-Up Works with OS-1 Bose adapter to let you replace a 2000-03 Pontiac Grand Prix radio (without RDS) while maintaining operation of the OnStar system and GM/Bose audio system

Description:

Chrysler/Dodge/Jeep Radio Adapter allows you to install a new receiver while retaining accessory power in select 2004-up Chrysler, Dodge, and Jeep vehicles

Description:

lets you replace the factory radio in select 2004-up Chevy and Pontiac vehicles that are not equipped with OnStar®

Description:

Lets steering wheel controls in numerous vehicles operate aftermarket receivers that have infrared remote controls * works with rear seat radio controls in some vehicles * splicing required

Description:

Allows you to control select Pioneer and Sony stereos with your factory steering wheel controls * splicing required

Description:

PAC IC-ALPA IPOD CABLE (FOR AI-NET BUS ALPINE RADIOS) WORKS WITH THE AUX AUDIO INPUT FEATURE and CONNECTS TO AN IPOD; PLUGS IN BEHIND THE STEREO ; PROVIDES AUDIO and CHARGING;DOES NOT HAVE CONTROL OR RADIO DISPLAY FEATURES; FOR AI-NET BUS ALPINE RADIOS

Description:

PAC AMP ADD ON BOSE SYSTEM PAC C2A-GM24

Description:

Allows you to control select Alpine, Clarion, JVC, and Kenwood stereos with your factory steering wheel controls * splicing required

Description:

PAC UPAC-GMC2 IPOD and AUXILIARY INPUT (20032008 CLASS 2 GM VEHICLES)MULTI-INPUT MEDIA DEVICE ; COMPATIBLE WITH NAVIGATION, NON-NAVIGATION RADIOS, FACTORY SAT TUNERS and DVD VIDEO SYSTEMS ; FULL IPOD CONTROL; 3.5MM AUXILIARY INPUT; RCA INPUT; COMPATIBLE WITH SELECT 03-08 CLASS 2 GM VEHICLES

Description:

Send the music from your iPod to your Kenwood stereo and charge the iPod's battery at the same time

Description:

iPod® Audio cable for JVC car stereo that have auxiliary audio input and iPod® connection

Description:

The PAC OS-2 BOSE OnStar Interface is suitable for General Motors (GM) class II vehicles such as 2003-2005 Non-Bose Car and more. The OS-2 Interface integrates a Data Link Controller chip (DLC) that is specifically designed for connecting to GMs class 2 data bus. For visual indication the PAC OS-2 OnStar Adapter comes with an OnStar active LED display. By triggering and eliminating unwanted audio noise the PAC OS-2 delivers high-clarity output. This interface includes an on-board amplifier with two 4 watts speakers in stereo for optimal functionality. With optional CM1 chime module the PAC OS-2 OnStar Interface retains door chimes effectively.

Description:

With the PAC Audio Line Input Cable you can connect your MP3 player Apple iPod video game system and a DVD player to your vehicle’s audio system easily. The Auxiliary Audio Input Cable is specially designed for General Motor vehicles like Seville and Corvette that come with a 10 pin connector for expanded functionality. Using the 2-channel RCA inputs you can connect this unit to any audio and video system for enhanced sound quality. The PAC Auxiliary Audio Input Cable comes with a CD changer that provides several functions like disc skip track skip track intro scan disc repeat track repeat disc random and track random.

Description:

PAC AUXPOD/IPAC-OEM IPOD INTERFACE (UNIVERSAL) USE TO INTERFACE AN IPOD TO A VEHICLES SOUND SYSTEM ; CHANGE TRACKS USING THE RADIO OR STEERING WHEEL RADIO CONTROLS ; NOISE-FREE AUDIO ISOLATION ; AUTOMATICALLY CHARGES THE IPOD BATTERY; TURNS OFF IPOD WHEN THE VEHICLE IS TURNED OFF ; FOR USE WITH 18 DIFFERENT FACTORY-INSTALLED RADIOS; UNIVERSAL

Description:

Connects between receiver's preamp outputs and amplifier * helps reduce noise caused by a ground loop

Description:

This radio replacement interface lets you replace the factory radio in select GM vehicles * while retaining all factory warning chimes and audible turn signal indicators. It does not retain OnStar -- capabilities in vehicles equipped with active OnStar.

Description:

The PAC SNI-35 a 2-channel adjustable line output converter works with most factory installed radios offering versatile usage. The PAC SNI-35 Line Output Converter delivers 2 to 40 watts RMS radio power output per channel. With the PAC SNI-35 Adjustable 2-channel Line Out Converter you can convert the radios speaker level output to the lower amplifier (RCA) level input. This converter integrates an audio transformer that provides high sound quality by eliminating noise interference. The PAC SNI-35 Adjustable 2-channel Line Out Converter ensures good linearity in amplification that ranges 20 - 20000 Hz at 0.5 db.

Description:

The PAC AB-FRD20 20-Pin Auxiliary Audio Input Cable’s design best suits a Ford vehicle that features a 20-pin plug located at the factory head unit. With plug-and-play harness the PAC AB-FRD20 Auxiliary Audio Input is perfect for usage with iPAC-OEM and AUX-BOX interface. The PAC 20-pin AUX cable connects your AUX-BOX interface to the CD changer port situated on the rear of the factory radio. By doing so it converts factory CD changer input to a universal audio input. For optimum sound quality the PAC AB-FRD20 Auxiliary Audio Input lets you connect the audio source directly into the factory radio.

Description:

allows you to control select Eclipse stereos with your factory steering wheel controls,splicing required

Description:

GM Radio Replacement Interface add an aftermarket stereo to select 2006-up GM vehicles while keeping use of OnStar and the factory-installed XM tuner

Description:

Description:

Toyota JBL Interface add an aftermarket receiver to select 2003-up Toyota vehicles,retains functionality of your JBL factory amplifier,retains fade and balance controls, along with Synthesis 5.1 and 7.1 surround-sound processing

Description:

Take your music, movies and video games along for the ride with this cable that allows you to connect components to your rear seat entertainment port.

Description:

2 AUX Inputs - 12v Wire Output

Description:

for GM SUV and Truck

Description:

This interface cable allows you to expand the entertainment options in your 2007 - 2008 Ford, Lincoln or Mercury vehicle.

Description:

The OS-3BOSE is a plug and play interface that allows replacement of a General Motors GMLAN factory radio. It will maintain operation of the OnStar system, Bose amplifier and speakers. The OS-3BOSE has on board switching to allow audio from the OnStar system to play through the two front factory speakers when OnStar is active. This interface retains all warning chimes, the audible turn signal indicators, and the vehicle rear parking assist system. Rear seat audio headphone jacks will also remain active and are designed for use with dual zone radios.

Description:

Plug your iPod into your car stereo with this multi-input cable so you can listen to the music you love while driving.

Description:

for Select Toyota and Lexus Vehicles

Description:

Listen to your favorite CDs without the hassle of changing a disc while driving with this CD changer interface.