1 channel amplifiers Car Amplifiers

you're in Car Amplifiers, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$254
  • product
POWER ACOUSTIK BAMF5500/1D BAMF SERIES CLASS D MONO AMPLIFIER (1700W)HIGH SPEED DIGITAL CIRCUITRY; FULLY REGULATED PWM POWER SUPPLY; 4-WAY PROTECTION CIRCUIT ; 1_ STABLE; BRIDGING SYNCHRONIZATION; VARIABLE LOW PASS40 HZ200 HZ; VARIABLE SUBSONIC FILTER20 HZ50 HZ; VARIABLE SUBWOOFER EQ @ 45 HZ; 0180 PHASE SWITCH ; FREQ RESP: 15 HZ150 HZ; S/N RATIO: 100 DB ; THD: 0.5%; INPUTS SENSITIVITY: 200MV8V; DUAL MONO SPEAKER OUTPUT CONNECTORS; PLATINUM-PLATED HEAVY-DUTY POWER and SPEAKER TERMINALS ; REMOTE DASH MOUNT LOW LEVEL GAIN CONTROL WITH CABLE; SYSTEM-DISTRESS INDICATOR; 1700W

starting at

$254
 

starting at

$599
  • product
1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

starting at

$599
 

starting at

$122
  • product
The superior efficiency of a Class-D amplifier means higher power output and greater compactness than an analog amplifier offers.Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer's Class-D amps transform very little power into heat so a higher percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power. The Class-D amplifier's PWM (Pulse Width Modulator) modulates the original audio input signal with a triangulated signal wave which has a much higher fixed frequency. The result is a digital signal which contains both the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) then filters out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.Bass boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-D7400M, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.Built into the GM-D7400M is a very smart crossover network. It works like a gateway, routing the big bass signals (adjustable from 40 to 240Hz or lower, at -12dB/octave) and filtering out higher-frequency signals to that subwoofer. This optimizes your system's efficiency and delivers the best possible sound quality.The GM-D7400M's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.

starting at

$122
 

starting at

$99
  • product
PRODUCT FEATURES:Class D amplifier circuitAluminum die cast heat sinkPower MOSFET switching power supplySpeaker level inputSignal sensing turn-on2ohm load capabilityLine output terminals (RCA) for extensionBlue illuminationGold-plated power and speaker terminalBuilt-in variable low-pass filterBuilt-in infrasonic filter

starting at

$99
 

starting at

$241
  • product
The key to Power Acoustik's success is to design and engineer products that meet the needs of the consumers all over the world. Power Acoustik is driven by one guiding set of principals: quality, innovation, engineering, performance, ergonomics, and value will always bring customers back to their brand of choice.PRODUCT FEATURES: Hi speed digital circuitry; Fully regulated PWM power supply; Four way protection circuit; 1 Ohm stable stereo; Bridging synchronization; Variable low pass 50Hz-150Hz; Variable subsonic filter 15Hz-40hz; Variable subwoofer EQ @ 45Hz; Phase Switch 0-180; Remote dash mount low level gain control with cable; Frequency response: 15Hz to 150hz; S/N ratio: 100 dB; THD: 0.5%; System distress indicator; Inputs sensitivity: 200mv-8v; Dual mono speaker output connectors; Gold plated heavy duty power & speaker terminals.

starting at

$241
 

starting at

$260
  • product
POWER ACOUSTIK LFA1-5500D LFA SERIES CLASS D MONO AMPLIFIER (1700W)HIGH SPEED DIGITAL CIRCUITRY; FULLY REGULATED PWM POWER SUPPLY; 4-WAY PROTECTION CIRCUIT ; 1_ STABLE; BRIDGING SYNCHRONIZATION; VARIABLE LOW PASS40 HZ200 HZ; VARIABLE SUBSONIC FILTER20 HZ50 HZ; VARIABLE SUBWOOFER EQ @ 45 HZ; 0180 PHASE SWITCH; REMOTE DASH MOUNT LOW LEVEL GAIN CONTROL WITH CABLE; FREQ RESP: 15 HZ150 HZ; S/N RATIO: 100 DB; THD: 0.5%; SYSTEM DISTRESS INDICATOR; INPUTS SENSITIVITY: 200MV8V; DUAL MONO SPEAKER OUTPUT CONNECTORS; PLATINUM-PLATED HEAVY-DUTY POWER and SPEAKER TERMINALS ; SHINY JET BLACK HEATSINK WITH DIAMOND CUT RIBS; 1700W

starting at

$260
 

starting at

$149
  • product
POWER ACOUSTIK BAMF2000/1D BAMF SERIES CLASS D MONO AMPLIFIER (600W)HIGH SPEED DIGITAL CIRCUITRY; FULLY REGULATED PWM POWER SUPPLY; 4-WAY PROTECTION CIRCUIT ; 1_ STABLE; BRIDGING SYNCHRONIZATION; VARIABLE LOW PASS40 HZ200 HZ; VARIABLE SUBSONIC FILTER20 HZ50 HZ; VARIABLE SUBWOOFER EQ @ 45 HZ; 0-180 PHASE SWITCH ; FREQ RESP: 15 HZ150 HZ; S/N RATIO: 100 DB ; THD: 0.5%; INPUTS SENSITIVITY: 200MV8V; DUAL MONO SPEAKER OUTPUT CONNECTORS; PLATINUM-PLATED HEAVY-DUTY POWER and SPEAKER TERMINALS ; REMOTE DASH MOUNT LOW LEVEL GAIN CONTROL WITH CABLE; SYSTEM-DISTRESS INDICATOR; 600W

starting at

$149
 

starting at

$220
  • product
High-speed digital circuitry Fully regulated PWM power supply 4-way protection circuit 1? stable stereo Bridging synchronization Variable low pass: 50 Hz-150 Hz Variable subwoofer EQ @ 45 Hz Variable subsonic filter: 15 Hz-40 Hz Phase switch: 0-180 Remote dash mount low-level gain control with cable Freq resp: 15 Hz-150 Hz S/N ratio: 100 dB THD: 0.5% System distress indicator Gold-plated, heavy-duty power and speaker terminals 2400W.

starting at

$220
 

starting at

$250
  • product
The Alpine MRP-M1000 Mono Car Amplifier a cost-effective unit comes with a thermal management system to reduce excess heat and save power. The Alpine MRP-M1000 Amplifier has a dual sided glass epoxy PC board for long lasting performance. To minimize the internal noise and prevent base intrusion the board circuits are assembled in STAR shape. The Alpine MRP-M1000 D Power Amplifier delivers 600 watts RMS at 4 ohms for an outstanding bass effect. With this high-power digital Class-D mono amplifier you can enjoy optimal sound clarity and stronger bass effect. The Alpine MRP-M1000 Mono Car Amplifier comes with a LED power indicator that alerts you during current fluctuations.

starting at

$250
 

starting at

$122
  • product
Power up your system with Alpine's V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.Alpine's high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.Rugged heat sinks and an extremely sophisticated thermal management processor that continuously monitors the amp's temperature, ensure nonstop output and stable, reliable performance.

starting at

$122
 

starting at

$338
  • product
Your search for a reliable and clear sound amplifier ends with the Kicker ZX Series 08ZX10001 D Amplifier equipped with the KICKEQ bass boost. Featuring the heat sink design the Kicker amplifier keeps internal components cooler to last longer. With balanced differential inputs the Kicker 08ZX10001 Mono Subwoofer Car Amplifier eliminates unwanted system noise. The Kicker 08ZX10001 Amplifier comes with a LED power indicator that alerts you during current fluctuations. The Kicker amplifier includes a remote bass control and an optical endcap. The Kicker Amplifier’s dimensions are 16.7 x 2.1 x 9.7 inches (W x H x D) and weighs 13.95 lbs.

starting at

$338
 

starting at

$115
  • product
Class A/B - 320W x 1 Chan. @ 4 Ohms - 500W x 1 Chan. @ 2 Ohms - 500 Watts Max

starting at

$115
 

starting at

$145
  • product
mono subwoofer amplifier * 500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms) * variable low-pass filter (50-200 Hz at 24 dB per octave) * bass boost (0-18 dB at 40 Hz ) * subsonic filter (15/25 Hz, 18 dB/octave ) *

starting at

$145
 

starting at

$133
  • product
With a bass boost frequency of up to 12dB you can experience high-quality bass effect with the Crunch Power Zone P10001 1-Channel AB Amplifier. It features MOSFET pulse width modulation power supply to offer Instant Maxx power output. The Crunch P1000.1D Car Audio Amplifier includes a remote bass control and oversized speaker terminals for expanded operation. The LED power and protection indicators guard the Crunch Power Zone P10001 Amplifier from currentamperage overload DC offset short circuits and thermal overload. The Crunch P1000.1D Car Audio Amplifier’s dimensions are 10 x 2.16 x 16.53 inches (W x H x D).

starting at

$133
 

starting at

$500
  • product
mono subwoofer amplifier * 500 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms) * Dynamic Thermal Management cooling system * Differential Input circuitry eliminates hum * variable low-pass filter (35-250 Hz, 24 dB/octave) * subsonic filter (28Hz) * variable bass boost (0-18 dB at 45 Hz) *

starting at

$500
 

starting at

$325
  • product
Enjoy the tight, hard-hitting bass of the 5001 by KLH. It features a 12" polymer-coated woofer and a 12" polymer-coated passive radiator to provide ample bass.

starting at

$325
 

starting at

$219
  • product
BOSS AUDIO OL5KD OUTLAW CLASS D MONOBLOCK POWER AMPLIFIER (5000W X 1 MAX, 2250W X 1 RMS, DIM: 2.63"H X 11.3"W X 17.13"L)INCLUDES REMOTE SUBWOOFER LEVEL CONTROL; SIGNAL-TO-NOISE RATIO: >100 DB;5000W X 1 MAX; 2250W X 1 RMS;DIM: 2.63"H X 11.3"W X 17.13"L

starting at

$219
 

starting at

$259
  • product
Your search for a compact and powerful digital amplifier ends with the Alpine PDX-1600 Class D Amplifier equipped with the switch-mode amplification. The Alpine PDX-1.600 Amplifier delivers 600 watts RMS power output at 4 ohms for an outstanding bass effect. It provides uncompromised performance with a frequency range of 20 Hz to 200 Hz. With this high-power digital Class-D mono channel amplifier, you can enjoy optimal sound clarity. To reduce excess heat and save power, the Alpine amplifier is equipped with the thermal management system. Featuring quick disconnect plugs, the Alpine PDX-1.600 600W Car Amplifier makes installation easy and fast. The Alpine amplifier comes with a LED power indicator that alerts you during current fluctuations.

starting at

$259
You'll find the best prices on 1 channel amplifiers in Car Amplifiers when you shop online at bizrate. Do all your comparison shopping for Boss Audio, Legacy Car Audio and Pyle Car Amplifiers in one place. Compare models and see which online Electronic stores have the best merchant ratings. Make an informed decision on 1 channel amplifiers Car Amplifiers before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Rockford Fosgate Punch T10001BD 1-Channel BD Amplifier or Power Acoustik BAMF Series BAMF55001D 1-Channel Class D Amplifier.