1000 watts Car Amplifiers

Description:

Power 1-channel Amplifier

Description:

Description:

Your search for a reliable and clear sound amplifier ends with the Kicker ZX Series 08ZX10001 D Amplifier equipped with the KICKEQ bass boost. Featuring the heat sink design the Kicker amplifier keeps internal components cooler to last longer. With balanced differential inputs the Kicker 08ZX10001 Mono Subwoofer Car Amplifier eliminates unwanted system noise. The Kicker 08ZX10001 Amplifier comes with a LED power indicator that alerts you during current fluctuations. The Kicker amplifier includes a remote bass control and an optical endcap. The Kicker Amplifier’s dimensions are 16.7 x 2.1 x 9.7 inches (W x H x D) and weighs 13.95 lbs.

Description:

PRODUCT FEATURES:Class D amplifier circuitAluminum die cast heat sinkPower MOSFET switching power supplySpeaker level inputSignal sensing turn-on2ohm load capabilityLine output terminals (RCA) for extensionBlue illuminationGold-plated power and speaker terminalBuilt-in variable low-pass filterBuilt-in infrasonic filter

Description:

2-channel car amplifier * 170 watts RMS x 2 at 4 ohms (250 watts x 2 at 2 ohms) * 500 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode) * high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz * variable bass boost (0-18 dB at 40 Hz) *

Description:

max Power 2-ohm 1000w X 2 Rms Power 4-ohm 300w X 2 Max Bridged Power 4-ohm 2000w X 1signal-to-noise Ratio 105db Thd 0.01% Dimensions: 11-3/4w X 2-11/16h X 15-13/16ltrimode Operation Bridgeable Remote Subwoofer Level Control Line And Speaker Level Inputsvariable Gain Control Power And Protection Leds Variable Lowpass Crossover High Pass Crossover0-+18db Variable Bass Boost Mosfet Power Supply

Description:

1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

Description:

1000 Watts

Description:

Features: 4- Channel, Bridgeable Amplifier 1000-Watts Maximum Trimode Capable Built-in Crossover Slope (HPF, FULL, LPF) Variable Low Pass Filter (30Hz-500Hz) Variable High Pass Filter (50Hz-1KHz) Dual Gain Control Remote Bass Control Bass Boost Shift...

Description:

Peak Power: 1000 Watts

Description:

Totally new, totally different! The super-efficient power density design gives you more power and the best sound quality. These amps are stackable, yes - stackable! Installation and multi-amp configurations are a snap with Alpine's PDX amps.PRODUCT FEATURES:Class-D;1 Channel (Mono) Operation;Stackable Installation Design;Thermal Management Processor;Subsonic Filter;Adjustable Crossover (LP);MOSFET Power Supply;Gold Plated RCA Input Connectors;Continuously Adjustable Gain Control;Gold Plated Power Screw Terminals;Non-Fading Pre-Amp Output.

Description:

With a bass boost frequency of up to 12dB you can experience high-quality bass effect with the Crunch Power Zone P10001 1-Channel AB Amplifier. It features MOSFET pulse width modulation power supply to offer Instant Maxx power output. The Crunch P1000.1D Car Audio Amplifier includes a remote bass control and oversized speaker terminals for expanded operation. The LED power and protection indicators guard the Crunch Power Zone P10001 Amplifier from currentamperage overload DC offset short circuits and thermal overload. The Crunch P1000.1D Car Audio Amplifier’s dimensions are 10 x 2.16 x 16.53 inches (W x H x D).

Description:

The Alpine MRP-M1000 Mono Car Amplifier a cost-effective unit comes with a thermal management system to reduce excess heat and save power. The Alpine MRP-M1000 Amplifier has a dual sided glass epoxy PC board for long lasting performance. To minimize the internal noise and prevent base intrusion the board circuits are assembled in STAR shape. The Alpine MRP-M1000 D Power Amplifier delivers 600 watts RMS at 4 ohms for an outstanding bass effect. With this high-power digital Class-D mono amplifier you can enjoy optimal sound clarity and stronger bass effect. The Alpine MRP-M1000 Mono Car Amplifier comes with a LED power indicator that alerts you during current fluctuations.

Description:

Description:

Super Sport AT Single-Channel Class A/B Car Amplifier • 2000 Watts Max • 1000 watts x 1 chan. @ 2 ohm • Twin Coil MOSFET Auto Step Power Supply • Soft Start Turn-On • 4-Way System Protection Circuitry • Bass Boost

Description:

Description:

Ground Pounder Series Amplifier • 2-Channel • 250W x2 Chan @ 4 ohms • 500W x2 Chan @ 2 ohms • 1000 Watts Max • Full Range Line Output • High Level Inputs • Illuminated Crunch Badge • Unbalanced Input RCA Jack •

Description:

4 x 35 Watts RMS at 4 Ohms 4 x 250 Watts Max at 4 Ohms 2 x 500 Watts Max at 4 Ohms Bridged 4 x 55 Watts at 2 Ohms RMS Electronic Crossover Network

Description:

Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in Lanzar products.PRODUCT FEATURES:4 x 125W RMS at 4 OHMS 4 x 250W MAX at 4 OHMS;2 x 500W MAX at 4 OHMS Bridged 4 x 200W at 2 OHMS RMS;Electronic Crossover Network;Bass Boost Circuit;2 Ohms Stereo Stable;Anti-Thump Turn-On;Tri-Mode Configurable;Illuminated Top Panel;Soft Turn On/Off;High & Low Level Inputs;Power & Protection LED Indicators;Advanced Protection Circuitry;Remote Control Bass Booster;THD: 65dB;Freq. Response: 15Hz'35kHz;Dimensions: 11.06'W x 2.24'H x 12'L.

Description:

1000 Watts RMS Mono Block Rubicon Series Subwoofer Amplifier

Description:

BOSS AUDIO D500.2 DIABLO 2-CHANNEL MOSFET BRIDGEABLE POWER AMPLIFIER (500W X 2 MAX @ 2_, 200W X 2 RMS @ 4_, DIM: 2.31"H X 11"W X 10.06"L)TRIMODE OPERATION;BRIDGEABLE; REMOTE SUBWOOFER LEVEL CONTROL; LINE and SPEAKER LEVEL INPUTS;* 0 TO +18 DB VARIABLE BASS BOOST;MOSFET POWER SUPPLY; VARIABLE LOW and HIGH PASS CROSSOVERS; INPUT GAIN CONTROL; INPUT SENSITIVITY SELECTOR;POWER and PROTECTION LEDS;500W X 2 MAX @ 2_;200W X 2 RMS @ 4_;DIM: 2.31"H X 11"W X 10.06"L

Description:

If you are looking for a reliable and high-performance amplifier then the JL Audio A1400 Mono Class-D Subwoofer Amplifier that comes with a power output of maximum 1000 watts is the ultimate choice. Designed with an aluminumsteel framework the JL audio amplifier offers long lasting performance. This high-power digital class-D mono subwoofer amplifier is equipped with an optional wired remote bass boost for improved sound clarity and strong bass effect. Featuring preamp inputs and outputs you can connect this JL Audio A1400 Amplifier to several audio systems for an enhanced audio output.

Description:

Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA660SL 4 x 110 Watt Amplifier *Power output: 80 watts RMS x 4 (4 ohm load), 110 watts RMS/200 watts max x 4 (2 ohm load), 300 watts max x 2 (4 ohm load) *Tri-mode bridging provides 150 watts x 2 (2 ohm load) + 300 watts x 1 (4 ohm load) operation. *Frequency Response: 15-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Separate variable low frequency crossovers for each pair of outputs: 40-350 Hz *Separate variable high frequency crossovers for each pair of outputs: 80-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 14" L *Net Weight: 11-1/2 lbs.

Description:

Lanzar VIBE241 1000 Watt 2 Channel MOSFET Amplifier

Description:

Lanzar VIBE251 2 Channe1600 Watts MOSFET Amplifier

Description:

Lanzar VIBE261 2 Channel 2400 Watt MOSFET Amplifier

Description:

500 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms) - 1-ohm stable: 1,500 watts RMS x 1 at 1 ohm - Variable low-pass filter (50-300 Hz, 18 dB/octave) - subsonic filter (20-50 Hz, 18 dB/octave)

Description:

* 2 x 250 Watts RMS at 4 Ohms * 2 x 500 Watts Max at 4 Ohms * 1 x 1000 Watts Max at 4 Ohms Bridged * 2 x 400 Watts RMS at 2 Ohms * Electronic Crossover Network * Bass Boost Circuit * Variable Phase Shift Control * 2 Ohms Stereo Stable * Anti-Thump Turn-On * Soft Turn On/Off * High & Low Level Inputs * Blue Light Illuminated Crossover Control * Power & Protection LED Indicators * Advanced Protection Circuitry * Bass Boost Remote Control * T.H.D: 0.04% * S/N Ratio: 90dB * Channel Separation: 65dB * Frequency Response: 5Hz- 35kHz * Dimensions: 10.47'W x 2.46'H x 12'L

Description:

Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in Lanzar products.PRODUCT FEATURES:2 x 250W RMS at 4 OHMS 2 x 500W MAX at 4 OHMS;1 x 1000W MAX at 4 OHMS Bridged 2 x 400W at 2 OHMS RMS;Electronic Crossover Network;Bass Boost Circuit;2 Ohms Stereo Stable;Anti-Thump Turn-On;Illuminated Top Panel;Soft Turn On/Off;High & Low Level Inputs;Power & Protection LED Indicators;Advanced Protection Circuitry;Remote Control Bass Booster;THD: 65dB;Freq. Response: 15Hz'35kHz;Dimensions: 11.06'W x 2.24'H x 12".

Description:

1200 watts RMS x 1 at 2 ohms 1,000 watts RMS x 1 at 4 ohms,ICEpower Class-D,low-pass filter