400 watts car amp Car Amplifiers

you're in Car Amplifiers, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$193
  • product
Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs.

starting at

$193
 

starting at

$150
  • product
mono subwoofer amplifier * 200 watts RMS x 1 at 4 ohms (400 watts x 1 at 2 ohms) * variable low-pass filter (50-200 Hz at 24 dB per octave) * variable bass boost (0-18 dB at 40 Hz) * wired remote bass level control *

starting at

$150
 

starting at

$250
  • product
500W x 1 Car Amplifier 200 watts RMS x 1 at 4 ohms (400 watts x 1 at 2 ohms),variable low-pass filter and subsonic filter,1-ohm stable

starting at

$250
 

starting at

$122
  • product
The superior efficiency of a Class-D amplifier means higher power output and greater compactness than an analog amplifier offers.Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer's Class-D amps transform very little power into heat so a higher percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power. The Class-D amplifier's PWM (Pulse Width Modulator) modulates the original audio input signal with a triangulated signal wave which has a much higher fixed frequency. The result is a digital signal which contains both the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) then filters out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.Bass boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-D7400M, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.Built into the GM-D7400M is a very smart crossover network. It works like a gateway, routing the big bass signals (adjustable from 40 to 240Hz or lower, at -12dB/octave) and filtering out higher-frequency signals to that subwoofer. This optimizes your system's efficiency and delivers the best possible sound quality.The GM-D7400M's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.

starting at

$122
 

starting at

$132
  • product
750W x 1 chan. @ 4 ohms • 2500W x 1 chan. @ 1 ohms Max • 1800W x 1 chan. @ 2 ohms Max • MOSFET power supply) - Tuned Bass EQ (0-18 dB bass boost) • Input voltage sensitivity selector

starting at

$132
 

starting at

$170
  • product
2-channel car amplifier * 100 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 2 ohms) * Dynamic Thermal Management cooling system * variable high- and low-pass filters (50-500 Hz, 12 dB/octave) * variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12,000 Hz) *

starting at

$170
 

starting at

$180
  • product
That's the best way to describe Thunder TC amplifiers. No flash. No bling. Nothing but power. TC amplifiers are built for listeners who want their music to be pure and loud. On-board crossovers and EQs let you customize your sound while the Smart Engage Circuitry lets you install TC amps without ripping out your factory system. Thunder TC amps are all about solid MTX power and should only be used when you want to rattle the windows of the vehicles rolling along side you.Patented Smart Engage Circuitry and both High and Low Level Inputs eliminate the need to remove the head unit during most factory integration installs without external adapters, devices or converters.Get all of the power you expect! Pure N-Channel V-FET Technology (Class A/B) - the best design for all multi-channel amplifiers making the output stage more efficient than common Class A/B amps. With this technology, you get more usable power while conventional Class A/B designs lose much more power as heat.Each Thunder amp is tested to guarantee it meets or exceeds customer's expectations and CEA compliant.

starting at

$180
 

starting at

$189
  • product
2-channel car amplifier * 120 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 4 ohms) * Dynamic Thermal Management cooling system * Differential Input circuitry eliminates hum * variable high- and low-pass filters (50-500 Hz, 24 dB/octave) * variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz) *

starting at

$189
 

starting at

$214
  • product
Multi Channel Amplifier. New cosmetics design, Removable top, KickEQ™ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination

starting at

$214
 

starting at

$280
  • product
KICKER 08ZX7005 ZX-SERIES 4 X 75-WATT AMPLIFIER WITH 400-WATT SUB CHANNEL700W MAX; 85W RMS MAX; FREQ RESP: 20 HZ2000 HZ; DIM: 2.12H X 20L X 9.17W; BASS BOOST: 0 DB-18 DB @ 40 HZ; ZX SERIES 3-CHANNEL CLASS AB WITH CLASS D SUBWOOFER CHANNEL CAR AMPLIFIER; MOSFET POWER SUPPLY; INCLUDES WIRED REMOTE BASS LEVEL CONTROL; ELIMINATES UNWANTED NOISE IN A SYSTEM; THERMAL, VOLTAGE and SHORT CIRCUIT PROTECTION

starting at

$280
 

starting at

$44
  • product
Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA460SL 2 x 45 Watt Amplifier *Power output: 45 watts RMS x 2 (4 ohm load), 80 watts RMS/160 watts max x 2 (2 ohm load), 320 watts x 1 (4 ohm load) *Frequency Response: 20-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Variable low frequency crossover: 40-350 Hz *Variable high frequency crossover: 250-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 6" L * Net Weight: 7-1/2 lbs.

starting at

$44
 

starting at

$150
  • product
Terminator amplifier incorporates high style with the latest technologies. It has a gloss cover that adds a powerful feel to any installation. All connections are on one side making it easy to create a custom looking, clean installation.Terminator amplifier is cooled utilizing active fan cooling - a variable speed internal fan normally reserved for MTX's highest end lines. As you turn your volume up, the amplifier output increases which engage the fan to automatically increase its speed drawing more cool air into the amp. This keeps the amplifier performing at its peak level longer and prevents thermal shutdown due to overheating. Talk about technology making life better. What's better than an affordable amplifier packed full of performance and these features?

starting at

$150
 

starting at

$51
  • product
Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Electronic Crossover Network;Bass Boost Circuit;Bridgeable at 4 Ohms;2 Ohm Stereo Stable;Gold Plated RCA Inputs;Line Outs for Left and Right Channel;Low Pass Filter Control;High Pass Filter Control;Remote Bass Level Control (optional);Power and Protection LED Indicators;Red Lighting Illumination;Side Leg Mounting;Soft Turn-on/Turn-off.

starting at

$51
 

starting at

$175
  • product
Peak Watts: 400 x 2 - Bridged Watts: 400 x 1 - With Built-in Crossover - 100 db Signal to Noise Ratio

starting at

$175
 

starting at

$96
  • product
To improve sound qualities of your audio system install the Kenwood KAC 6404 400W Car Audio Amplifier that features 40 watts of RMS power output for each of its 4 channels. Equipped with the reliable MOSFET power supply and efficient internal components the Kenwood KAC-6404 4-channel Car Amplifier provides exceptional sound clarity. Pair the Kenwood amplifier with classy speakers for experiencing high-quality tone and depth. Using the preamp and speaker-level inputs you can connect the Kenwood KAC-6404 4-channel Car Amplifier to any type audio system. It comes with a variable high and low-pass filter that gives compatibility with different types of applications. The Kenwood amplifier’s dimensions are 13.7 X 2.3 X 9.1 inches (W x H x D).

starting at

$96
 

starting at

$115
  • product
INDICATIONS: Trimode operation. Bridgeable. Remote subwoofer level control. Line and speaker level inputs. Variable gain control. Power and protection LEDs. Variable lowpass crossover. High pass crossover. MOSFET power supply.

starting at

$115
 

starting at

$196
  • product
POWER ACOUSTIK OV1-4000D CLASS D GOTHIC SERIES MONO AMPLIFIER (4000-WATT) 4? RMS: 1200W; 2? RMS: 1700W; 1? RMS: 2200W; HIGH-SPEED DIGITAL CIRCUITRY; FULLY REGULATED PWM POWER SUPPLY; 4-WAY PROTECTION CIRCUIT; 1? STABLE; BRIDGING SYNCHRONIZATION; VARIABLE LOW PASS 50 HZ150 HZ; VARIABLE SUBSONIC FILTER 15 HZ40 HZ; VARIABLE SUBWOOFER EQ @ 45 HZ; PHASE SWITCH 0-180; REMOTE DASH MOUNT LOW LEVEL GAIN CONTROL WITH CABLE; FREQ RESP: 15 HZ150 HZ; S/N RATIO: 100 DB; THD: 0.5%; SYSTEM DISTRESS INDICATOR; INPUTS SENSITIVITY: 200MV8V; DUAL MONO SPEAKER OUTPUT CONNECTORS; PLATINUM-PLATED HEAVY-DUTY POWER and SPEAKER TERMINALS CLASS D GOTHIC SERIES MONO AMPLIFIER (4000-WATT)

starting at

$196
 

starting at

$239
  • product
Another great amplifier for installations where space is tight, but you still want to add some good 'boom'. The T5001bd is a fantastic amplifier for driving one 2-ohm DVC subwoofer.

starting at

$239
You'll find the best prices on 400 watts car amp in Car Amplifiers when you shop online at bizrate. Do all your comparison shopping for Boss Audio, Pyle and Jensen Car Amplifiers in one place. Compare models and see which online Electronic stores have the best merchant ratings. Make an informed decision on 400 watts car amp Car Amplifiers before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Rockford Fosgate P4004 4-Channel AB Amplifier or Kicker 08ZX4001 Monoblock Class D Car Amplifier.