Audiopipe amps Car Amplifiers

Description:

GD3001 Class D Professional Amplifier

Description:

Amplifiers: Built-in Variable High Pass & Low Pass Crossover. RCA Line Input/Output Jacks. Electronic Protection Circuitry to Protect The Amplifier from Short Circuit, DC Offset & Thermal Overload. Remote Sub-Woofer Volume Control. 55 mm(H) x 176mm(V)...

Description:

Bridgeable MOSFET

Description:

If you want to experience the next-generation surround sound the Audiopipe AP3002 Bridgeable MOSFET Amplifier with bass boost frequency ranging from 0 to 18dB at 45Hz is the perfect choice. It comes with a built-in variable octave active crossover for optimal surround sound performance. With a MOSFET power supply that comes with a maximum power output of 1500 watts the Audiopipe AP3002 2-Channel Amplifier is ideal for enhanced audio experience. For long lasting performance this amplifier comes with a four-way protection including thermal protection bass level remote control short circuit protection and DC offset protection.

Description:

Peak Power: 400 Watt - with Remote Bass Control

Description:

You can experience high-quality bass effect with the Audiopipe AP30001D 3000 Watt Monoblock Amplifier that features bass boost frequency of up to 12dB. With the 2-channel mono-block operation the Audiopipe AP30001D Amplifier intensifies the audio signal and enhances the surround sound. Featuring the overload and overheat protection functionalities the Audiopipe AP30001D Class D Amplifier can protect your system from excess load and heat. This high-power digital Class-D mono amplifier is equipped with remote bass control that expands its operation. By using this Audiopipe amplifier you can reduce signal distortion up to 0.2% THD. The Audiopipe AP30001D Class D Amplifier’s dimensions are 6.9 x 2.2 x 30 inches (W x H x D).

Description:

Bridgeable MOSFET

Description:

Bridgeable MOSFET

Description:

with Remote Bass Control

Description:

Description:

Amplifiers: Frequency Response: 20Hz - 30Hz Input Sensitivity: .25 - 2.5v Crossover Range: 55Hz - 550Hz Bass Boost: 0-18db @ 45Hz

Description:

Marketing description is not available.

Description:

2.2" (H) x 6.9" (W) x 14" (L) Master/Slave Allows 2 Amps to be linked for Maximum Power Output. Bass Boost Frequency: 30-80Hz Frequency response: 8-180Hz Signal to Noise Ratio: 70dB

Description:

Amplifiers: 1ohm Load Stable Overload Protection Overheat Protection Variable Low Pass Electronic Crossover Variable Subsonic Filter Built-in Variable Phase Shift Master/slave allows 2 amps to be linked for maximum power output 55 mm(H) x 176mm(V) x...

Description:

GD6001 Class D Professional Amplifier

Description:

GM-502 2 Channel Mosfet Power Amplifier with Remote Turn On/Off and a Stable 2 Ohm Load.

Description:

2.2" (H) x 6.9" (W) x 7.1" (L) Master/Slave Allows 2 Amps to be linked for Maximum Power Output. Bass Boost Frequency: 30-80Hz Frequency response: 8-180Hz Signal to Noise Ratio: 70dB

Description:

Amplifiers: 55mm (H) x 176mm (W) x 224mm (L) 2.2" (H) x 6.9" (W) x 8.8" (L) Signal to Noise Ratio: 100dB Input Sensitivity: 0.25V - 5V Output power (RMS) Stereo 2 channel - 100w x 2 @ 4ohm Stereo 2 channel - 125w x 2 @ 2ohm Bridge 1 Channel - 300w x 1...

Description:

1.6 inches(H) x 10.9 inches(W) x 14.2 inches(L) Frequency Response: 15Hz - 30kHz Electronic protection circuitry to protect the amp from short circuit, DC offset and thermal overload Bass boost: 0-18dB @ 45Hz Crossover Frequency: Low: 40-250Hz, High:...

Description:

1.6 inches(H) x 10.9 inches(W) x 14.2 inches(L) Frequency Response: 15Hz - 30kHz Electronic protection circuitry to protect the amp from short circuit, DC offset and thermal overload Bass boost: 0-18dB @ 45Hz Crossover Frequency: Low: 40-250Hz, High:...

Description:

Amplifiers: 55mm (H) x 176mm (W) x 260mm (L) 2.2" (H) x 6.9" (W) x 10.2" (L) Signal to Noise Ratio: 100dB Input Sensitivity: 0.25V - 5V Output power (RMS) Stereo 2 channel - 100w x 2 @ 4ohm Stereo 2 channel - 125w x 2 @ 2ohm Bridge 1 Channel - 300w x 1...

Description:

Amplifiers: 41mm(H) x 276mm(W) x 280mm(L) 1.6 inches(H) x 10.9 inches(W) x 10.2 inches(L) Output Power (RMS) : Stereo 2 Ch - 100W x 2 @ 4ohm Stereo 2 Ch - 200W x 2 @ 2ohm Mono 1 Ch - 400W x 1 @ 4ohm Ultra slim design for a compact installation White...

Description:

Amplifiers: 10 Load Stable Overload Protection Overheat Protection Variable Low Pass Electronic Crossover Variable Subsonic Filter. Built-in Variable Phase Shift. Master/Slave Allows 2 Amps to be Linked for Maximum Power Output. 55 mm(H) x 176mm(V) x...

Description:

GM2002 2 Channel Power Amplifier

Description:

Amplifiers: Ultra slim design for a compact installation White light illuminated cooling fan White light illuminated terminals Built-in Variable High Pass & Low Pass Crossover RCA Line Input/Output Jacks Electronic Protection Circuitry to Protect The...

Description:

Amplifiers: Ultra slim design for a compact installation White light illuminated cooling fan White light illuminated terminals Built-in Variable High Pass & Low Pass Crossover RCA Line Input/Output Jacks Electronic Protection Circuitry to Protect The...

Description:

Amplifiers: Built-in Variable High Pass & Low Pass Crossover. RCA Line Input/Output Jacks. Electronic Protection Circuitry to Protect the Amplifier from Short Circuit, DC Offset & Thermal Overload. Remote Sub-Woofer Volume Control. 55 mm(H) x 176mm(V)...

Description:

GM4505 5 Channel Mosfet Power Amplifier

Description:

Amplifiers: 1ohm Load Stable Overload Protection Overheat Protection Variable Low Pass Electronic Crossover Variable Subsonic Filter. Built-in Variable Phase Shift. Master/Slave Allows 2 Amps to be linked for Maximum Power Output. 55 mm(H) x 176mm(V) x...