Bass audio Car Amplifiers

you're in Car Amplifiers, see other matches in:

Advertisement
Advertisement
sort by:
add tax & shipping for
 
 
 

starting at

$599
  • product
1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

starting at

$599
 

starting at

$220
  • product
High-speed digital circuitry Fully regulated PWM power supply 4-way protection circuit 1? stable stereo Bridging synchronization Variable low pass: 50 Hz-150 Hz Variable subwoofer EQ @ 45 Hz Variable subsonic filter: 15 Hz-40 Hz Phase switch: 0-180 Remote dash mount low-level gain control with cable Freq resp: 15 Hz-150 Hz S/N ratio: 100 dB THD: 0.5% System distress indicator Gold-plated, heavy-duty power and speaker terminals 2400W.

starting at

$220
 

starting at

$325
  • product
Enjoy the tight, hard-hitting bass of the 5001 by KLH. It features a 12" polymer-coated woofer and a 12" polymer-coated passive radiator to provide ample bass.

starting at

$325
 

starting at

$193
  • product
Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs.

starting at

$193
 

starting at

$95
  • product
1000 Watts x 2 Output 2000 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) Control MOSFET PWM Power Supply Power ON LED Indicator LED Protection Indicator Remote Bass Boost Hi/Lo Impedance Input Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Dimensions: 1.97 H x 11.42 W x 17 L

starting at

$95
 

starting at

$52
  • product
You can experience high-quality bass effect with the Power Acoustik LFA2-420 Car Amplifier that features bass boost frequency of up to 24dB. Equipped with the reliable MOSFET power supply the Power Acoustik LFA2-420 Class AB Amplifier provides exceptional sound clarity. The Power Acoustik 420W Amplifier comes with PWM circuitry and three-way protection circuit. With the selectable high full and low-pass filters the Power Acoustik LFA2-420 Class AB Amplifier delivers superior surround sound. For undisturbed clear audio signals the Power Acoustik amplifier features a signal to noise ratio of 97dB and harmonic distortion up to 0.02% THD.

starting at

$52
 

starting at

$48
  • product
Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA460SL 2 x 45 Watt Amplifier *Power output: 45 watts RMS x 2 (4 ohm load), 80 watts RMS/160 watts max x 2 (2 ohm load), 320 watts x 1 (4 ohm load) *Frequency Response: 20-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Variable low frequency crossover: 40-350 Hz *Variable high frequency crossover: 250-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 6" L * Net Weight: 7-1/2 lbs.

starting at

$48
 

starting at

$215
  • product
Peak Watts: 1200 x 1 - With Built-in Crossover - With Bass Boost - 90 db Signal to Noise Ratio

starting at

$215
 

starting at

$300
  • product
Features: Rated Power(stereo): 75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V) Rated Power (bridged): 150 W RMS x 2 @ 3 ohm-8 ohm(11V-14.5V) THD at Rated Power: S/N Ratio*: >108.5dB below rated power Frequency Response: 5 Hz - 30 KHz (+0, -1dB) Damping Factor: >200 @ 4 ohm per. ch./50 Hz Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 13.4"L x 9.25"W x 2.36"H Differential-Balanced Input Topology: (2 pair of inputs) Front Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Rear Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Speaker output connections: accept up to 8ga. wire +12V and Ground connections: accept up to 4ga. Wire

starting at

$300
 

starting at

$125
  • product
Rockfords legendary Punch Series amps have been continually relied upon to deliver ultra-clean power to everything from mild to wild systems for more than a decade By drawing on the feedback they receive from hardcore car audio competitors Rockford has continually improved their Punch amps to offer more reliable power and better sound quality

starting at

$125
 

starting at

$244
  • product
The key to Power Acoustik's success is to design and engineer products that meet the needs of the consumers all over the world. Power Acoustik is driven by one guiding set of principals: quality, innovation, engineering, performance, ergonomics, and value will always bring customers back to their brand of choice.PRODUCT FEATURES: Hi speed digital circuitry; Fully regulated PWM power supply; Four way protection circuit; 1 Ohm stable stereo; Bridging synchronization; Variable low pass 50Hz-150Hz; Variable subsonic filter 15Hz-40hz; Variable subwoofer EQ @ 45Hz; Phase Switch 0-180; Remote dash mount low level gain control with cable; Frequency response: 15Hz to 150hz; S/N ratio: 100 dB; THD: 0.5%; System distress indicator; Inputs sensitivity: 200mv-8v; Dual mono speaker output connectors; Gold plated heavy duty power & speaker terminals.

starting at

$244
 

starting at

$76
  • product
Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA660SL 4 x 110 Watt Amplifier *Power output: 80 watts RMS x 4 (4 ohm load), 110 watts RMS/200 watts max x 4 (2 ohm load), 300 watts max x 2 (4 ohm load) *Tri-mode bridging provides 150 watts x 2 (2 ohm load) + 300 watts x 1 (4 ohm load) operation. *Frequency Response: 15-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Separate variable low frequency crossovers for each pair of outputs: 40-350 Hz *Separate variable high frequency crossovers for each pair of outputs: 80-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 14" L *Net Weight: 11-1/2 lbs.

starting at

$76
 

starting at

$125
  • product
That's the best way to describe Thunder TC amplifiers. No flash. No bling. Nothing but power. TC amplifiers are built for listeners who want their music to be pure and loud. On-board crossovers and EQs let you customize your sound while the Smart Engage Circuitry lets you install TC amps without ripping out your factory system. Thunder TC amps are all about solid MTX power and should only be used when you want to rattle the windows of the vehicles rolling along side you.Patented Smart Engage Circuitry and both High and Low Level Inputs eliminate the need to remove the head unit during most factory integration installs without external adapters, devices or converters.Get all of the power you expect! Pure N-Channel V-FET Technology (Class A/B) - the best design for all multi-channel amplifiers making the output stage more efficient than common Class A/B amps. With this technology, you get more usable power while conventional Class A/B designs lose much more power as heat.Each Thunder amp is tested to guarantee it meets or exceeds customer's expectations and CEA compliant.

starting at

$125
 
store rating:
  • product
2400 Watt MTX Audio JackHammer Series Class D Monoblock Amplifier • 400 watts x 1 chan. @ 4 ohms • 800 watts x 1 chan. @ 2 ohms • 1200 watts x 1 chan. @ 1 ohm • Tuned Bass EQ • Internal Fan • Low-Pass Filter • CEA-2006 Compliant
at
 

starting at

$139
  • product
The Rockford Fosgate Punch P3002 slams your speakers with a one-two combination of power and control, so they deliver the high-end musical performance you demand. The clean circuit design, MOSFET power, and proprietary technology inside the P3002 bring out the kind of detail in your music that you just can't get from an in-dash receiver alone. Drive a pair of coaxial or component speakers with 75 watts RMS per channel, or switch the amp to bridged mode you'll get a full 300 watts for your favorite subwoofer!

starting at

$139
 

starting at

$92
  • product
1200 watts max bridged power 2-ohm stable stereo tri-mode capable 3-way protection circuit with system distress indicator Variable hi-pass/low-pass filter plus full selectable crossover (hi/full/low) Variable 18dB 40 Hz bass boost High/low level inputs with floating ground plus line output 4-gauge power/ground connection plus platinum RCA connections

starting at

$92
 
store rating:
  • product
HD Series 5-Channel Class D Car Amplifier • 100 watts x 4 chan. @ 4 ohms • 900W Continuous power • Single Cycle Control • R.I.P.S (Regulated, Intelligent Power Supply) • Variable bass boost up to +15dB
at
Best prices on Bass audio in Car Amplifiers. Check out BizRate for great deals on Car Amplifiers from Pyle, Power Acoustik and Lanzar. Use BizRate's latest online shopping features to compare prices for Bass audio. Read product specifications, calculate tax and shipping charges, sort your results, and buy Electronics with confidence. Easily narrow your search and find the product that's perfect for you: Rockford Fosgate Punch T10001BD 1-Channel BD Amplifier - JL Audio 10001V2 1-Channel D Amplifier.