Bass cars Car Amplifiers

Description:

Power 1-channel Amplifier

Description:

Super Sport AT Single-Channel Class A/B Car Amplifier • 2000 Watts Max • 1000 watts x 1 chan. @ 2 ohm • Twin Coil MOSFET Auto Step Power Supply • Soft Start Turn-On • 4-Way System Protection Circuitry • Bass Boost

Description:

J2 Series Monoblock High-Efficiency Class D Car Amplifier • 1000W x 1 Chan. @ 1 ohm • MOSFET power supply • Bass remote included • Preamp RCA outputs • Low-pass active filter

Description:

1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

Description:

You can experience high-quality bass effect with the Power Acoustik LFA2-420 Car Amplifier that features bass boost frequency of up to 24dB. Equipped with the reliable MOSFET power supply the Power Acoustik LFA2-420 Class AB Amplifier provides exceptional sound clarity. The Power Acoustik 420W Amplifier comes with PWM circuitry and three-way protection circuit. With the selectable high full and low-pass filters the Power Acoustik LFA2-420 Class AB Amplifier delivers superior surround sound. For undisturbed clear audio signals the Power Acoustik amplifier features a signal to noise ratio of 97dB and harmonic distortion up to 0.02% THD.

Description:

Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA660SL 4 x 110 Watt Amplifier *Power output: 80 watts RMS x 4 (4 ohm load), 110 watts RMS/200 watts max x 4 (2 ohm load), 300 watts max x 2 (4 ohm load) *Tri-mode bridging provides 150 watts x 2 (2 ohm load) + 300 watts x 1 (4 ohm load) operation. *Frequency Response: 15-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Separate variable low frequency crossovers for each pair of outputs: 40-350 Hz *Separate variable high frequency crossovers for each pair of outputs: 80-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 14" L *Net Weight: 11-1/2 lbs.

Description:

1000 Watts

Description:

Features: 4- Channel, Bridgeable Amplifier 1000-Watts Maximum Trimode Capable Built-in Crossover Slope (HPF, FULL, LPF) Variable Low Pass Filter (30Hz-500Hz) Variable High Pass Filter (50Hz-1KHz) Dual Gain Control Remote Bass Control Bass Boost Shift...

Description:

750W x 1 chan. @ 4 ohms • 2500W x 1 chan. @ 1 ohms Max • 1800W x 1 chan. @ 2 ohms Max • MOSFET power supply) - Tuned Bass EQ (0-18 dB bass boost) • Input voltage sensitivity selector

Description:

Designed using the latest electronic technology available, these high-quality MOSFET amplifiers are bridgeable (4-ohm minimum load) and 2-ohm stable (stereo) for highest possible power output. High and low level inputs and input level control also add to the versatility and take the complexity out of many installations. Selectable high-pass/low-pass variable crossovers and up to 12dB variable bass boost can help provide additional bass punch. Protection circuit guards against short circuit overload. Mute turn-on circuit eliminates annoying "power-up thump". Gold-plated screw terminals for high conductivity. Tri-mode bridging and two separate sets of variable crossovers in the LA660 enables further variations for different applications. It's like getting two great amplifiers in one package! All models covered by a 5-year manufacturer's limited warranty. LA460SL 2 x 45 Watt Amplifier *Power output: 45 watts RMS x 2 (4 ohm load), 80 watts RMS/160 watts max x 2 (2 ohm load), 320 watts x 1 (4 ohm load) *Frequency Response: 20-30,000 Hz (+/- 3dB) *Signal-to-noise ratio: 95dB *Variable low frequency crossover: 40-350 Hz *Variable high frequency crossover: 250-2,500 Hz *Dimensions: 10-1/4" W x 2-1/4" H x 6" L * Net Weight: 7-1/2 lbs.

Description:

2400 Watts

Description:

Enjoy the tight, hard-hitting bass of the 5001 by KLH. It features a 12" polymer-coated woofer and a 12" polymer-coated passive radiator to provide ample bass.

Description:

2000 watts RMS x 1 at 1-ohm 1,500 watts RMS x 1 at 2 ohms,variable low-pass filter (40-240 Hz, 24 dB per octave),selectable bass boost (0, 6, 9, 12 dB, variable from 40 to 120 Hz)

Description:

With Bass Boost

Description:

Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GT5-A3001 comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system bass tuning based on subwoofer location and accompanying loudspeaker components.Auxiliary line-level outputs

Description:

60W x 4 Car Amp 150 watts RMS x 2 bridged,separate front and rear variable filters,variable bass boost (0-8 dB)

Description:

60W x 2 Car Amp 150 watts RMS x 1 bridged,variable high- and low-pass filters,switchable bass boost (0, 6, 12 dB)

Description:

400W RMS x 1 at 2ohms Car Amp 300 watts RMS x 1 at 4 ohms,variable low-pass filter (50-500 Hz, 12 dB/octave),selectable bass boost (0, 6, 12 dB)

Description:

1000 Watts x 2 Output 2000 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) Control MOSFET PWM Power Supply Power ON LED Indicator LED Protection Indicator Remote Bass Boost Hi/Lo Impedance Input Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Dimensions: 1.97 H x 11.42 W x 17 L

Description:

The Rockford Fosgate Punch P3002 slams your speakers with a one-two combination of power and control, so they deliver the high-end musical performance you demand. The clean circuit design, MOSFET power, and proprietary technology inside the P3002 bring out the kind of detail in your music that you just can't get from an in-dash receiver alone. Drive a pair of coaxial or component speakers with 75 watts RMS per channel, or switch the amp to bridged mode you'll get a full 300 watts for your favorite subwoofer!

Description:

Peak: 2000 Watt - With Bass Boost

Description:

With Bass Boost

Description:

1200 watts max bridged power 2-ohm stable stereo tri-mode capable 3-way protection circuit with system distress indicator Variable hi-pass/low-pass filter plus full selectable crossover (hi/full/low) Variable 18dB 40 Hz bass boost High/low level inputs with floating ground plus line output 4-gauge power/ground connection plus platinum RCA connections

Description:

Rockfords legendary Punch Series amps have been continually relied upon to deliver ultra-clean power to everything from mild to wild systems for more than a decade By drawing on the feedback they receive from hardcore car audio competitors Rockford has continually improved their Punch amps to offer more reliable power and better sound quality

Description:

Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs.

Description:

Lanzar VIBE231 800 Watt 2 Channel MOSFET Amplifier

Description:

Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in Lanzar products.PRODUCT FEATURES:2 x 300W RMS at 4 OHMS 2 x 600W MAX at 4 OHMS;1 x 1200W MAX at 4 OHMS Bridged 2 x 500W at 2 OHMS RMS;Electronic Crossover Network;Bass Boost Circuit;2 Ohms Stereo Stable;Anti-Thump Turn-On;Illuminated Top Panel;Soft Turn On/Off;High & Low Level Inputs;Power & Protection LED Indicators;Advanced Protection Circuitry;Remote Control Bass Booster;THD: 65dB;Freq. Response: 15Hz'35kHz;Dimensions: 11.06'W x 2.24'H x 13.5'L.

Description:

Lanzar VIBE1800D MONO Class D Amplifier

Description:

Need a dedicated amp to drive a subwoofer? Rockford Fosgate has you covered with the Punch P3001. Slam your sub with 150 watts of RMS power at 4 ohms (or 300 watts at 2 ohms), and listen as your bass comes to life. With its clean circuit design, MOSFET power, and proprietary technology, excessive noise is never a problem with a Punch amp. The P3001 can bring out extraordinary impact in your music, driving your subwoofer with strength you just can't get from a lesser amp.

Description:

Features: Rated Power(stereo): 75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V) Rated Power (bridged): 150 W RMS x 2 @ 3 ohm-8 ohm(11V-14.5V) THD at Rated Power: S/N Ratio*: >108.5dB below rated power Frequency Response: 5 Hz - 30 KHz (+0, -1dB) Damping Factor: >200 @ 4 ohm per. ch./50 Hz Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 13.4"L x 9.25"W x 2.36"H Differential-Balanced Input Topology: (2 pair of inputs) Front Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Rear Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Speaker output connections: accept up to 8ga. wire +12V and Ground connections: accept up to 4ga. Wire