800 x 1 Car Amplifiers

Description:

Lanzar VIBE231 800 Watt 2 Channel MOSFET Amplifier

Description:

Lanzar VIBE241 1000 Watt 2 Channel MOSFET Amplifier

Description:

Lanzar VIBE531 5 Channel 1600 Watts High Power MOSFET Amplifier

Description:

Legacy LA590 High Performance 800 Watt 2 ChannelAmplifier

Description:

800 Watt Full Mosfet High Power 2 Channel Car Amplifier

Description:

Peak Watts: 400 x 2 - Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost

Description:

Pyramid Audio prides itself as being the most affordable solution to car audio. Pyramid was considered the worldwide leader of affordable audio products. It continues today with the same goal and notion in mind to provide its valued worldwide consumers with most competitive product for their money.PRODUCT FEATURES: 400 Watts x 2 Output; 800 Watts x 1 Bridged Output; Variable Hi/Low Electronic Crossover Network; Variable Bass Boost (0- +18 dB @ 60Hz); Variable Input Level (Gain) Control; Remote Turn On/Off; Gold Plated RCA Inputs; High level MOLEX Inputs; Power ON LED Indicator; LED Protection Indicator; Remote Bass Boost; S/N Ratio: 95dB; THD: < 0.04%; Thermal, Overload, Short Circuit Protection; Anti-Thump Turn-On.

Description:

Audiobahn A2X200HQ 200 Watts 2-Channel High Current Amplifier

Description:

Turn your vehicle into a bass machine with this Audiobahn mono-channel amplifier. It pumps out 500 watts of power at 2 Ohms. Take it down to 1 Ohm and get up to 1600 watts of peak power.

Description:

Outputs: 1 Pair - Peak Watts: 800 x 1 - Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost - 76 db Signal to Noise Ratio

Description:

Outputs: 1 Pair - Peak Watts: 800 x 2 - Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost

Description:

Power 2-channel Amplifier

Description:

The Punch P8002 delivers a stout 200 watts RMS per channel in stereo mode (plenty for a set of power-hungry component speakers, or a couple of subwoofers), or a hair-raising 800 watts RMS of clean power in bridged mode. The innovative circuit design, MOSFET output stages, and proprietary technology inside the Punch P8002 bring out extraordinary detail and impact in your music, with ultra-clean power you just can't get from a lesser amp.

Description:

Peak Watts: 800 x 2 - Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost - 105 db Signal to Noise Ratio

Description:

Legacy LA995 2 Channel 1200 Watts Sapphire Series Amplifier

Description:

2-Channel Amp (200W x 2)

Description:

New for 2003 Audiobahn is proud to introduce the new Intake series of amplifiers. Smaller than their High Current and Class A/B brothers these are no amps to be trifle with. Each amp is equipped with an air intake to keep the unit running cool for hours. With plenty of juice, and the ability to add features like a digital voltmeter and remote bass control, you can modify this amp to fit your needs as well as your budget.

Description:

This Audiobahn mono-channel amplifier is a real powerhouse. It brings your power-hungry subwoofer to life with up to 800 Watts of peak power running at 2 Ohms.

Description:

High Current Rack Mount Mono Amplifier designed for easy install and functionability, the Audiobahn Rack Mount Series of amplifiers include a Digital Volt Meter, VU Meters and easy-access control knobs.

Description:

Audiobahn A800X1Q 560 Watts Mono A/B Mosfet Amplifier

Description:

Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost

Description:

Crunch V-2600 2-Channel V-Drive Amplifier

Description:

Features: Stereo Or Bridged Mono Output Tri-Way Capable 200 Watts RMS x 2 @ 4 Ohms 400 Watts x 2 @ 2 Ohms 800 Watts x 1 In Bridged Mode Speaker And Preamp Level Inputs Preamp Outputs (Pass Full-Range Signal To Another Amp) High-Pass/Low-Pass Crossover (Variable 50-200 Hz, 12 dB Per Octave) Bass Boost (0-18 dB @ 40 Hz) Frequency Response 20-20,000 Hz Requires 2-Gauge Power And Ground Leads Unregulated Class A/B Power Supply Offers A Significant Increase In Power At 2 Ohms Dimensions (W x H x D): 25-3/4" x 2-1/2" x 10-1/8"

Description:

Turn it up. Pyle takes quality to a new level with this two-channel bridgeable MOSFET amplifier for your car's sound system. It features 400W x 2 outputs or 800W x 1 bridged output. It boasts a variable high/low electronic crossover network; variable bass boost; variable input level (gain) control; remote on/off; gold-plated RCA inputs; high level MOLEX input; power LED indicator; LED protection indicator; S/N ratio of 95dB; THD of less than 1.04%; thermal, overload, and short circuit protection; and anti-thump turn-on. Measures approximately 16-1/2" x 14" x 4-1/2". 90-day LMW. Made in China.

Description:

The Kicker's KX700.5, the comprehensive, space-saving amp that's designed to drive your entire system! While the front four channels keep your front and rear speakers occupied with plenty of juice, the efficient Class D subwoofer section unleashes a clean 200 watts (400 watts at 2 ohms) of power on your sub setup - you get killer bass to go along with rockin' mids and highs. If sound control is the name of your game, the KX700.5 has you covered. The front four channels feature variable high-pass crossovers (with a low-pass crossover on the sub channel) so you can maximize the performance of all your speakers. And Kicker knows that sometimes you get the low-frequency fever * that's why you can kick in up to a slammin' 18 dB of KickBass at 40 Hz. To make quick adjustments easier, Kicker supplies a remote bass level control that you can mount on your dash. Even if your receiver doesn't have preamp outputs, you can still get the KX700.5 into your life, thanks to the speaker-level inputs. And, so you can just sit back and enjoy the music, four-way protection circuits help keep the amp out of trouble. Features: 3-, 4-, or 5-channel output Tri-Way capable 40 watts x 4 + 200 watts x 1 RMS at 4 ohms 150 watts x 2 + 200 x 1 bridged power 75 watts x 4 + 400 x 1 at 2 ohms front and rear variable 50-200 Hz high-pass crossovers, 12 dB per octave variable 50-200 Hz low-pass crossover, 12 dB per octave, on the subwoofer section efficient Class D subwoofer channel 0-18 dB KickBass bass boost at 40 Hz Dash-mountable remote bass level control Speaker- and preamp-level inputs Frequency response 20-20,000 Hz 4-way protection circuits Requires 4-gauge power and ground leads