Car audio cross over Car Amplifiers

Description:

Power 1-channel Amplifier

Description:

The Legacy LA120 240 watts 2-channel Amplifier features 85dB signal-to-noise ratio which enables you to listen to audio without any encumbrance. With the help of heavy-duty aluminum alloy heat sink this amplifier keeps the internal components cool allowing for long lasting performance. The Legacy LA120 2-Car Audio Amplifier comes with a LED power indicator that protects your system from critical conditions such as current variations and more. The LA120 Audio Amplifier delivers a maximum power output of 120 watts from each of its two channels. The Legacy LA120 2-Car Audio Amplifier is amplifier has a remote control for user-friendly operations.

Description:

2-channel car amplifier * 170 watts RMS x 2 at 4 ohms (250 watts x 2 at 2 ohms) * 500 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode) * high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz * variable bass boost (0-18 dB at 40 Hz) *

Description:

1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

Description:

You can experience high-quality bass effect with the Power Acoustik LFA2-420 Car Amplifier that features bass boost frequency of up to 24dB. Equipped with the reliable MOSFET power supply the Power Acoustik LFA2-420 Class AB Amplifier provides exceptional sound clarity. The Power Acoustik 420W Amplifier comes with PWM circuitry and three-way protection circuit. With the selectable high full and low-pass filters the Power Acoustik LFA2-420 Class AB Amplifier delivers superior surround sound. For undisturbed clear audio signals the Power Acoustik amplifier features a signal to noise ratio of 97dB and harmonic distortion up to 0.02% THD.

Description:

Enhance the performance of your car's audio system with this powerful Class D mono power amplifier. auto amplifier,car stereo amplifier

Description:

mono subwoofer amplifier * 500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms) * variable low-pass filter (50-200 Hz at 24 dB per octave) * bass boost (0-18 dB at 40 Hz ) * subsonic filter (15/25 Hz, 18 dB/octave ) *

Description:

500W x 1 Car Amplifier 200 watts RMS x 1 at 4 ohms (400 watts x 1 at 2 ohms),variable low-pass filter and subsonic filter,1-ohm stable

Description:

1000 Watts

Description:

The Alpine MRP-M1000 Mono Car Amplifier a cost-effective unit comes with a thermal management system to reduce excess heat and save power. The Alpine MRP-M1000 Amplifier has a dual sided glass epoxy PC board for long lasting performance. To minimize the internal noise and prevent base intrusion the board circuits are assembled in STAR shape. The Alpine MRP-M1000 D Power Amplifier delivers 600 watts RMS at 4 ohms for an outstanding bass effect. With this high-power digital Class-D mono amplifier you can enjoy optimal sound clarity and stronger bass effect. The Alpine MRP-M1000 Mono Car Amplifier comes with a LED power indicator that alerts you during current fluctuations.

Description:

Enjoy the tight, hard-hitting bass of the 5001 by KLH. It features a 12" polymer-coated woofer and a 12" polymer-coated passive radiator to provide ample bass.

Description:

High-speed digital circuitry Fully regulated PWM power supply 4-way protection circuit 1? stable stereo Bridging synchronization Variable low pass: 50 Hz-150 Hz Variable subwoofer EQ @ 45 Hz Variable subsonic filter: 15 Hz-40 Hz Phase switch: 0-180 Remote dash mount low-level gain control with cable Freq resp: 15 Hz-150 Hz S/N ratio: 100 dB THD: 0.5% System distress indicator Gold-plated, heavy-duty power and speaker terminals 2400W.

Description:

The Rockford Fosgate Punch P3002 slams your speakers with a one-two combination of power and control, so they deliver the high-end musical performance you demand. The clean circuit design, MOSFET power, and proprietary technology inside the P3002 bring out the kind of detail in your music that you just can't get from an in-dash receiver alone. Drive a pair of coaxial or component speakers with 75 watts RMS per channel, or switch the amp to bridged mode you'll get a full 300 watts for your favorite subwoofer!

Description:

2400 Watts

Description:

Terminator amplifier incorporates high style with the latest technologies. It has a gloss cover that adds a powerful feel to any installation. All connections are on one side making it easy to create a custom looking, clean installation.Terminator amplifier is cooled utilizing active fan cooling - a variable speed internal fan normally reserved for MTX's highest end lines. As you turn your volume up, the amplifier output increases which engage the fan to automatically increase its speed drawing more cool air into the amp. This keeps the amplifier performing at its peak level longer and prevents thermal shutdown due to overheating. Talk about technology making life better. What's better than an affordable amplifier packed full of performance and these features?

Description:

* MOJO MC Series Class D Monoblock Car Amplifier * RMS Power Rating: * 4 ohms: 625 watts x 1 chan. * 2 ohms: 1250 watts x 1 chan. * 1 ohm: 2500 watts x 1 chan. * Remote bass level input (remote level control Memphis 16-PRRG sold separately) * LED power...

Description:

Power up your system with Alpine's V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.Alpine's high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.Rugged heat sinks and an extremely sophisticated thermal management processor that continuously monitors the amp's temperature, ensure nonstop output and stable, reliable performance.

Description:

1200 watts Max, Class A/B 2-Channel Amplifier • 150 watts x 2 chan. @ 2 ohms • 600 watts x 1 chan. @ 4 ohms Bridged • MOSFET Power Supply • Variable High Pass and Low Pass Crossover • Soft Delay Remote Turn On/Off Circuit • Self Diagnostic Protection...

Description:

The key to Power Acoustik's success is to design and engineer products that meet the needs of the consumers all over the world. Power Acoustik is driven by one guiding set of principals: quality, innovation, engineering, performance, ergonomics, and value will always bring customers back to their brand of choice.PRODUCT FEATURES: Hi speed digital circuitry; Fully regulated PWM power supply; Four way protection circuit; 1 Ohm stable stereo; Bridging synchronization; Variable low pass 50Hz-150Hz; Variable subsonic filter 15Hz-40hz; Variable subwoofer EQ @ 45Hz; Phase Switch 0-180; Remote dash mount low level gain control with cable; Frequency response: 15Hz to 150hz; S/N ratio: 100 dB; THD: 0.5%; System distress indicator; Inputs sensitivity: 200mv-8v; Dual mono speaker output connectors; Gold plated heavy duty power & speaker terminals.

Description:

Terminator amplifier incorporates high style with the latest technologies. It has a gloss cover that adds a powerful feel to any installation. All connections are on one side making it easy to create a custom looking, clean installation.Terminator amplifier is cooled utilizing active fan cooling - a variable speed internal fan normally reserved for MTX's highest end lines. As you turn your volume up, the amplifier output increases which engage the fan to automatically increase its speed drawing more cool air into the amp. This keeps the amplifier performing at its peak level longer and prevents thermal shutdown due to overheating. Talk about technology making life better. What's better than an affordable amplifier packed full of performance and these features?

Description:

Rockfords legendary Punch Series amps have been continually relied upon to deliver ultra-clean power to everything from mild to wild systems for more than a decade By drawing on the feedback they receive from hardcore car audio competitors Rockford has continually improved their Punch amps to offer more reliable power and better sound quality

Description:

Lanzar VIBE231 800 Watt 2 Channel MOSFET Amplifier

Description:

Need a dedicated amp to drive a subwoofer? Rockford Fosgate has you covered with the Punch P3001. Slam your sub with 150 watts of RMS power at 4 ohms (or 300 watts at 2 ohms), and listen as your bass comes to life. With its clean circuit design, MOSFET power, and proprietary technology, excessive noise is never a problem with a Punch amp. The P3001 can bring out extraordinary impact in your music, driving your subwoofer with strength you just can't get from a lesser amp.

Description:

Get the power to rock your ride with this 1200W amp that features full MOSFET power and Pulse-Width Modulation circuitry for clean, efficient operation. auto amplifier,car stereo amplifier

Description:

Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs.

Description:

1000 Watts x 2 Output 2000 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) Control MOSFET PWM Power Supply Power ON LED Indicator LED Protection Indicator Remote Bass Boost Hi/Lo Impedance Input Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Dimensions: 1.97 H x 11.42 W x 17 L

Description:

POWER ACOUSTIK BAMF2600/2 BAMF SERIES CLASS A/B AMPLIFIER (450W X 2)FULL MOSFET POWER SUPPLY ; PWM CIRCUITRY; FULL SELECTABLE CROSSOVER ; 3-WAY PROTECTION CIRCUIT; TRI-MODE CAPABLE ; VARIABLE LOW PASS40 HZ250 HZ; VARIABLE HIGH PASS40 HZ250 HZ ; VARIABLE 024 DB BASS BOOST; SUBSONIC CONTROL 30175 KZ ; 2_ STABLE STEREO; 450W X 2

Description:

Features: 4- Channel, Bridgeable Amplifier 1000-Watts Maximum Trimode Capable Built-in Crossover Slope (HPF, FULL, LPF) Variable Low Pass Filter (30Hz-500Hz) Variable High Pass Filter (50Hz-1KHz) Dual Gain Control Remote Bass Control Bass Boost Shift...

Description:

Power up your system with Alpine MRP-F300! This best selling amplifier offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.

Description:

POWER ACOUSTIK OV2-2200 2-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER (2200-WATT) 4-CHANNEL; 4? RMS: 370W X 4; 2? RMS: 450W X 4; MONO RMS: 900W; BRIDGED MAX: 2200W; FULL MOSFET POWER SUPPLY; PWM CIRCUITRY; FULL SELECTABLE CROSSOVER ; 3-WAY PROTECTION CIRCUIT; TRI-MODE CAPABLE; VARIABLE LOW PASS 40 HZ120 HZ; VARIABLE HIGH PASS 150 HZ1.5 KHZ; VARIABLE 18 DB BASS BOOST @ 40 HZ; FREQ RESP: 10 HZ TO 30 KHZ; S/N RATIO: 98 DB; THD: 0.02%; 2? STABLE STEREO; SYSTEM DISTRESS INDICATOR; HIGH/LOW LEVEL INPUTS WITH FLOATING GROUND; 4-GAUGE POWER/GROUND CONNECTION; PLATINUM RCA CONNECTORS; LINE OUTPUT WITH FLOATING GROUND; BLUE LED; CHROME TOP PLATE PANEL 2-CHANNEL CLASS A/B GOTHIC SERIES AMPLIFIER (2200-WATT)