Car stereo amplifiers Car Amplifiers

Description:

You can experience high-quality bass effect with the Power Acoustik LFA2-420 Car Amplifier that features bass boost frequency of up to 24dB. Equipped with the reliable MOSFET power supply the Power Acoustik LFA2-420 Class AB Amplifier provides exceptional sound clarity. The Power Acoustik 420W Amplifier comes with PWM circuitry and three-way protection circuit. With the selectable high full and low-pass filters the Power Acoustik LFA2-420 Class AB Amplifier delivers superior surround sound. For undisturbed clear audio signals the Power Acoustik amplifier features a signal to noise ratio of 97dB and harmonic distortion up to 0.02% THD.

Description:

Get the power to rock your ride with this 1200W amp that features full MOSFET power and Pulse-Width Modulation circuitry for clean, efficient operation. auto amplifier,car stereo amplifier

Description:

Upgrade your car audio system with this 350W amplifier that features 4 channels for brilliant sound. auto amplifier,car stereo amplifier

Description:

2-channel car amplifier * 170 watts RMS x 2 at 4 ohms (250 watts x 2 at 2 ohms) * 500 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode) * high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz * variable bass boost (0-18 dB at 40 Hz) *

Description:

Sony's Xplod amps combine form and function in a mix that'll make your system look and sound great. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the...

Description:

Boss Audio CH850M 850 Watt Mono Chaos Amplifier. Max power: 850W x 1, 2 OHM. RMS power: 200W x 1, 4 OHM. RMS power: 400W x 1, 2 OHM. Signal-to-noise ratio 102 dB. THD 0.01%. Dimensions: 11-3/4" W x 2-11/16" H x 9-3/4" L. Includes remote subwoofer level...

Description:

4-channel car amplifier * 50 watts RMS x 4 at 4 ohms (75 watts x 4 at 2 ohms) * 180 watts RMS x 2 bridged output at 4 ohms (4 ohm stable in bridged mode) * high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz * variable bass boost (0-18 dB at 40 Hz) * cooling fan *

Description:

The Rockford Fosgate Punch P3002 slams your speakers with a one-two combination of power and control, so they deliver the high-end musical performance you demand. The clean circuit design, MOSFET power, and proprietary technology inside the P3002 bring out the kind of detail in your music that you just can't get from an in-dash receiver alone. Drive a pair of coaxial or component speakers with 75 watts RMS per channel, or switch the amp to bridged mode you'll get a full 300 watts for your favorite subwoofer!

Description:

US Amps XT1000D US Amps 1000 Watt Mono Car Stereo Sub Amplifier

Description:

US Amps XT2000D US Amps 2000 Watt Mono Car Stereo Sub Amplifier

Description:

New 2008 cosmetics design, Removable top, KickEQ™¿ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination

Description:

Removable top, KickEQ™ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination New cosmetics design

Description:

New 2008 cosmetics design, Removable top, KickEQ™ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination

Description:

New 2008 cosmetics design, Removable top, KickEQ™¿ Boost with variable gain, crossover frequency controls, 3 automatic turn on modes, differential inputs for noise elimination

Description:

2-channel car amplifier * 100 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 2 ohms) * Dynamic Thermal Management cooling system * variable high- and low-pass filters (50-500 Hz, 12 dB/octave) * variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12,000 Hz) *

Description:

RCA Pre~Amp Outputs

Description:

The innovative circuit design, MOSFET output stages, and proprietary technology inside the Punch P5002 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 125 watts RMS per channel in stereo mode (plenty for a set of power-hungry component speakers, or a couple of subwoofers), or bridge the P5002 for an enormous 500 watts RMS.

Description:

Enhance your car stereo with this two-channel bridgeable amplifierCar amplifier boasts 1000 watts total system output at 4 ohmsElectronics device features variable gain controlBridgeable amplifierTri-way configuration:1/2 channels 2 x 500 watts total...

Description:

Pump up the volume with this high powered stereo amplifier Complete your car customization with a 2600-watt mono block mosfet amplifier Amplifier makes the perfect gift for any music loverMono block subwoofer amplifier2-Ohm stable Variable sub-sonic...

Description:

PYLE 19in 1200W STEREO PWR AMP/MIXER 70V NIC - 5-Channel 19" Rack Mount Stereo Power Mixer/Amplifier Features/ 5 Channel Mixer - 4 Mic Inputs XLR & 1/4'- 1 Stereo Line Input - 1/4' & RCA - 1 Mono Line Input RCA - 1 Stereo Phono Input RCA with Ground Screw - Effects Loop RCA In/Out - Mix Bus Jack to Connect Another PT910 - Stereo/Mono Selector A/B Speaker Selector - Stereo or Bridged Power into 4 or 8 Ohms - 70V Output (Mono) - Binding Post Outputs - L and R Master Volume Controls with Blue Light Illumination - Feedback Filter with Rotary Control - Thermal Overload Protection with Indicator - Clip LED Indicator - Heavy Duty Fan Cooling - Blue LED Level Display - Headphone Output Frequency Response: 10-50 kHz ±3dB - 110/220V Switchable - Dimensions: 5 3/8'H x 19'W x 14 7/16'

Description:

70W KX Series - 100W Bridged Mono

Description:

The "Bazooka" branded amplifier products feature sharp cosmetics, tons of innovative features, and a dollar to watt ratio second to none. With their chrome and aluminum cosmetic and blue illuminated badging, these amps will look as good as they perform.When the Bazooka badge lights up, this thing's ready to rock! You'll have at-a-glance confirmation that the amp is powered up and ready to roar.The BA260 is a 2 x 60 watt amplifier at 4 ohms, but is bridgeable to 2 ohm mono, making it the perfect amplifier to boost up your top end a bit, or even drive a couple 10 inch or 8 inch Bass Tubes or a component subwoofer. With a built in crossover that can either be high pass or low pass, this amp is ready to do a great job in most smaller systems.As with all BA amplifiers, the chrome end caps keep all the wiring safe from incidental damage, and look great doing it. The unique design also allows plenty of room for the amplifiers heat sinks to do their job - keeping the amplifier cool even while power output is at maximum.

Description:

125 watts RMS x 2 channels at 2 ohms - 3 Ways Protection Circuitry - 4 ohm Mono Stable

Description:

275W RMS x 2 channels at 2 ohms - 3 Ways Protection Circuitry - 4 ohm Mono Stable

Description:

CS Series 2 Channel 100 watt amplifier CSA50.2