Diamond audio Car Amplifiers

Description:

Description:

Description:

D1 Series 2-Channel Class A/B Car Amplifier • 75 Watts x 4 Chan. @ 4 Ohms • 125 Watts x 4 Chan @ 2 Ohms • Bass Remote Control • Speaker Level Inputs • 3-Way Protection Circuitry • Polycarbonate End Plates •

Description:

Description:

Description:

Description:

Description:

Description:

Description:

Peak Watts: 1200 x 1 - With Built-in Crossover - With Bass Boost - 90 db Signal to Noise Ratio

Description:

Peak Watts: 400 x 2 - Bridged Watts: 400 x 1 - With Built-in Crossover - 100 db Signal to Noise Ratio

Description:

Pulse Width Modulated (PWM) MOSFET Switching Power Supply Frequency Response 20 - 20,000 Hz Crossover Switchable (Off/HP/LP) Internal 12dB/Octave High Pass or 24dB/Octave Low Pass Filter (30-500Hz) Stable into 2 Ohm Stereo Loads

Description:

Outputs: 1 Pair - Peak Watts: 150 x 4 - Bridged Watts: 150 x 2 - With Built-in Crossover - 100 db Signal to Noise Ratio

Description:

The LA480 is a 2 Channel 600 Watt High Speed Bridgeable MOSFET AmplifierPRODUCT FEATURES: 2 x 40 Watts RMS @ 4 Ohms; 2 x 60 Watts RMS @ 2 Ohms; 2 x 300 Watts Max Output; 1 x 600 Watts Bridge Mode; Polished Chrome Finish w/Plexiglass Panel; Soft Turn On/Off Circuit; Variable Gain Control; Remote Turn On/Off; Hi/Low Level Inputs; Power On LED Indicator; Fully Adjustable Electronic Cross Over Network; Remote Control Bass Boost (0-18dB @ 60Hz); 2 Ohm Stereo Stable; Bridgeable Into 4 Ohms; MOSFET PWM Power Supplies; LED Protection Indicator; Frequency Response: 10-30 kHz; Power Supply Voltage: 14.4 VDC/NRG GD (10.5-16V); Maximum Current Draw: 15A; Dimensions: 11.5W' x 2'H x 8.25'L.

Description:

Peak Watts: 400 x 2 - Bridged Watts: 800 x 1 - With Built-in Crossover - With Bass Boost

Description:

Legacy LA680 High Performance 1000 Watt 2 Channel BridgeableAmplifier

Description:

Internal 12dB/Octave Low Pass Filter (50-250Hz) Nickel plated, low resistance power and speaker connector blocks Chassis mounted ATC/ATO type automotive fuses High Current Output Capability (2 or 1 Ohm) Frequency Response 20 - 20,000 Hz

Description:

Pulse Width Modulated (PWM) MOSFET Switching Power Supply Extruded Aluminum Heatsink Double sided PC boards Bass Boost EQ (0 to +12dB) at 50Hz Frequency Response 20 - 20,000 Hz

Description:

Double Sided Gold Plated PC boards High Current Output Capability (2 or 1 Ohm) Intended for use on subwoofers Bass Boost EQ (0 to +12dB) at 50Hz Crossover LP

Description:

Stereo/Mono Mix Capability (Hybrid 3rd channel from 2 channels) Stable into 2 Ohm Stereo Loads Internal 12dB/Octave High Pass or 24dB/Octave Low Pass Filter (30-500Hz) Crossover Switchable (Off/HP/LP) Frequency Response 20 - 20,000 Hz

Description:

Shinny Jet Black Heatsink with Diamond Cut Ribs MOSFET Transistor Outputs MOSFET Power Supply PWM Circuitry Full Selectable Crossover HI/Full/Low Three Way Protection Circuit 2-Ohm Stable Stereo Tr...

Description:

* Shiny Jet Black Heatsink with Diamond Cut Ribs * Hi Speed Digital Circuitry * Fully Regulated PWM Power Supply * Four Way Protection Circuit * 1 Ohm Stable * Bridging Synchronization * Variable L...

Description:

Three fully independent variable internal crossovers: 1: CH 1/2. 2: CH 3/4. 3: Additional fully independent and variable on-board auxiliary crossover with assignable RCA inputs and outputs. Outputs can be linked to allow a single L/R RCA pair to run all channels.

Description:

Description:

Legacy LA1880 1200 Watt 4 Channel Blue Diamond Amplifier

Description:

Legacy LA2080 2400 Watt 2 Channel Amplifier

Description:

Legacy LA780 1000W 2 Channel Amplifier

Description:

Legacy LA1480 1600 Watt 2 Channel Amplifier

Description:

Description: