Digital class d Car Amplifiers

you're in Car Amplifiers, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$185
  • product
mono subwoofer car amplifier * 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) * variable low-pass filter (40-240 Hz) * wired bass control (variable 0 to 12 dB boost at 50 Hz) * preamp- and speaker-level inputs *

starting at

$185
 

starting at

$241
  • product
The key to Power Acoustik's success is to design and engineer products that meet the needs of the consumers all over the world. Power Acoustik is driven by one guiding set of principals: quality, innovation, engineering, performance, ergonomics, and value will always bring customers back to their brand of choice.PRODUCT FEATURES: Hi speed digital circuitry; Fully regulated PWM power supply; Four way protection circuit; 1 Ohm stable stereo; Bridging synchronization; Variable low pass 50Hz-150Hz; Variable subsonic filter 15Hz-40hz; Variable subwoofer EQ @ 45Hz; Phase Switch 0-180; Remote dash mount low level gain control with cable; Frequency response: 15Hz to 150hz; S/N ratio: 100 dB; THD: 0.5%; System distress indicator; Inputs sensitivity: 200mv-8v; Dual mono speaker output connectors; Gold plated heavy duty power & speaker terminals.

starting at

$241
 

starting at

$122
  • product
The superior efficiency of a Class-D amplifier means higher power output and greater compactness than an analog amplifier offers.Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer's Class-D amps transform very little power into heat so a higher percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power. The Class-D amplifier's PWM (Pulse Width Modulator) modulates the original audio input signal with a triangulated signal wave which has a much higher fixed frequency. The result is a digital signal which contains both the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) then filters out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.Bass boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-D7400M, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.Built into the GM-D7400M is a very smart crossover network. It works like a gateway, routing the big bass signals (adjustable from 40 to 240Hz or lower, at -12dB/octave) and filtering out higher-frequency signals to that subwoofer. This optimizes your system's efficiency and delivers the best possible sound quality.The GM-D7400M's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.

starting at

$122
 

starting at

$220
  • product
High-speed digital circuitry Fully regulated PWM power supply 4-way protection circuit 1? stable stereo Bridging synchronization Variable low pass: 50 Hz-150 Hz Variable subwoofer EQ @ 45 Hz Variable subsonic filter: 15 Hz-40 Hz Phase switch: 0-180 Remote dash mount low-level gain control with cable Freq resp: 15 Hz-150 Hz S/N ratio: 100 dB THD: 0.5% System distress indicator Gold-plated, heavy-duty power and speaker terminals 2400W.

starting at

$220
 

starting at

$500
  • product
Totally new, totally different! The super-efficient power density design gives you more power and the best sound quality. These amps are stackable, yes - stackable! Installation and multi-amp configurations are a snap with Alpine's PDX amps.PRODUCT FEATURES:Class-D;1 Channel (Mono) Operation;Stackable Installation Design;Thermal Management Processor;Subsonic Filter;Adjustable Crossover (LP);MOSFET Power Supply;Gold Plated RCA Input Connectors;Continuously Adjustable Gain Control;Gold Plated Power Screw Terminals;Non-Fading Pre-Amp Output.

starting at

$500
 
store rating:
  • product
Pump up the volume and rock out to your favorite songs with this powerful 5-channel amplifier that delivers up to 1200W of power. auto amplifier,car stereo amplifier
at
 

starting at

$285
  • product
Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in Lanzar products.PRODUCT FEATURES:Mono block subwoofer amplifier;0.5-Ohm stable;MOSFET power supply;PWM (Pulse-Width-Modulated) system;Double sided epoxy PCB circuit board;Gold plated RCA inputs;Custom terminal block for speaker connections;Thermal, Overload & Short Protection;Remote bass control;Soft turn On/Off.

starting at

$285
 

starting at

$173
  • product
The Heritage Class-D amplifier has been designed using the latest in electronic technology available today.This mono subwoofer amplifier is the result of advanced high speed switching technology that overcomes the less-efficient class AB design. The Heritage Class-D amplifier reflects your true appreciation for power bass reproduction in the mobile environment.The amplifier is designed for low-frequency information only and it is not capable of reproducing any mid/high-frequency information. This is due to the noise introduced into the signal by the switching speed of the power supply, which must be filtered out of the audio signal.The power supply incorporated into the Heritage amplifier is a DC to DC switching power supply designed to have adequate headroom for ever the most demanding peak and dynamic range found on today's CDs and recordings.

starting at

$173
 

starting at

$235
  • product
Mono Amplifier 800 watts RMS x 1 at 4 ohms,1-ohm stable,Class-D design

starting at

$235
 

starting at

$786
  • product
The Lanzar OPTI4000D Competition Class Amplifier, a high-performance amplifier, features a remote bass level control that provides optimal sound clarity and strong bass effect. With the gold plated RCA inputs, the Lanzar OPTI4000D Amplifier enables improved signal transfer. The Mono Block Subwoofer BIG POWER Amplifier delivers 4000 watts of RMS power output from its single channel at 1 ohm for expanded usage. Featuring LED power and protection indicators, this 1-channel amplifier can protect your system from short circuit, thermal, and voltage overload conditions. The Lanzar OPTI4000D Mono Block Amplifier comes with a custom terminal block for enhanced speaker connections.

starting at

$786
 

starting at

$180
  • product
The key to Power Acoustik's success is to design and engineer products that meet the needs of the consumers all over the world. Power Acoustik is driven by one guiding set of principals: quality, innovation, engineering, performance, ergonomics, and value will always bring customers back to their brand of choice.PRODUCT FEATURES: Hi speed digital circuitry; Fully regulated PWM power supply; Four way protection circuit; 1 Ohm stable stereo; Bridging synchronization; Variable low pass 50Hz-150Hz; Variable subsonic filter 15Hz-40hz; Variable subwoofer EQ @ 45Hz; Phase Switch 0-180; Remote dash mount low level gain control with cable; Frequency response: 15Hz to 150hz; S/N ratio: 100 dB; THD: 0.5%; System distress indicator; Inputs sensitivity: 200mv-8v; Dual mono speaker output connectors; Gold plated heavy duty power & speaker terminals.

starting at

$180
 

starting at

$250
  • product
750 watts RMS x 1 at 2 ohms variable low-pass filter (50-200 Hz at 24 dB/octave),600 watts RMS x 1 at 4 ohms,Class-D design

starting at

$250
 

starting at

$206
  • product
Lanzar developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye-catching cosmetics, all come together in "Street Team" by Lanzar.PRODUCT FEATURES: Mono Block Subwoofer Amplifier; 1 Ohm Stable; MOSFET Power Supply; PWM (Pulse-Width-Modulated) System; Double Sided Epoxy PCB Circuit Board; Gold Plated RCA Inputs; Custom Terminal Block for Speaker Connections; Thermal, Overload & Short Protection; Remote Bass Control; Soft Turn On/Off.

starting at

$206
 

starting at

$269
  • product
Your search for a compact and powerful digital amplifier ends with the Alpine PDX-1600 Class D Amplifier equipped with the switch-mode amplification. The Alpine PDX-1.600 Amplifier delivers 600 watts RMS power output at 4 ohms for an outstanding bass effect. It provides uncompromised performance with a frequency range of 20 Hz to 200 Hz. With this high-power digital Class-D mono channel amplifier, you can enjoy optimal sound clarity. To reduce excess heat and save power, the Alpine amplifier is equipped with the thermal management system. Featuring quick disconnect plugs, the Alpine PDX-1.600 600W Car Amplifier makes installation easy and fast. The Alpine amplifier comes with a LED power indicator that alerts you during current fluctuations.

starting at

$269
 

starting at

$165
  • product
Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These products will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.e.

starting at

$165
 

starting at

$130
  • product
Pyle PLA3000D is Class-D Mono Block 2400 Watt MOSFET Digital Amplifier.PRODUCT FEATURES: Mono Block Subwoofer Amplifier; 1 Ohm Stable; MOSFET Power Supply; PWM (Pulse-Width-Modulation) System; Glass Epoxy PCB; Gold Plated RCA Inputs; Custom Terminal Block for Speaker Connection; Thermal Protection; Overload Protection; Short Circuit Protection; Variable Subsonic Filter (15Hz-10Hz, 24dB/Octave); Phase Control 0-180 Degree; Remote Bass Control; Input Impedance: 10K Ohms; Soft Turn On/Off; Advanced Protection Circuitry; S/N Ratio: > 90dB; Heavy Duty Power Coated Heatsink.

starting at

$130
 

starting at

$269
  • product
If you want to take your audio experience to a whole new level, then the Alpine PDX-4100 4-Channel D Amplifier equipped with variable high and low pass filters is the perfect choice. The Alpine PDX-4100 Car Amplifier has a 4-layer glass epoxy PC board for long lasting performance. The Alpine PDX-4100 Car Amplifier delivers 100 watts RMS power output to each of its 4 channels at 4 ohms for an outstanding bass effect. To reduce excess heat and save power, the Alpine amplifier integrates the thermal management system. The board circuits are assembled in STAR shape in order to minimize the internal noise and prevent base intrusion.

starting at

$269
 

starting at

$265
  • product
200 watts RMS x 4 at 4 ohms variable high- and low-pass filters (50-200 Hz; 2.5K-10k Hz, 12 dB/octave),300 watts RMS x 2 in bridged mode,Class-D design

starting at

$265
 

starting at

$270
  • product
700W x 1 chan. @ 4 ohms - 700W x 1 chan. @ 2 ohms - 800W x 1 chan. Max - Digital amplification - Thermal, short circuit, overload, DC offset protection circuitry

starting at

$270
You'll find the best prices on Digital class d in Car Amplifiers when you shop online at bizrate. Do all your comparison shopping for Power Acoustik, Lanzar and Pyle Car Amplifiers in one place. Compare models and see which online Electronic stores have the best merchant ratings. Make an informed decision on Digital class d Car Amplifiers before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Pioneer GM-D8400M Monoblock Class D Car Amplifier or Power Acoustik A3000DB 1-Channel D Amplifier.