Profile car amplifiers Car Amplifiers

Description:

mono subwoofer amplifier * 220 watts RMS x 1 at 4 ohms (350 watts RMS x 1 at 2 ohms) * MOSFET power supply * remote-mount level control with 16-foot cable included * selectable bass boost (0-12 dB) at 45 Hz *

Description:

150 Watts x 4 1.5-4 ohms 150 watts RMS x 4 (1.5 - 4 ohms per channel),speaker- and preamp-level inputs,variable high and low pass filter (50-500 Hz, 12 or 24dB/octave)

Description:

750 Watts X 1 1.5-4 ohms 750 watts RMS x 1 (1.5 - 4 ohms per channel),speaker- and preamp-level inputs,variable high and low pass filter (50-500 Hz, 12 or 24dB/octave)

Description:

2-channel car amplifier * 160 watts RMS x 2 at 4 ohms (240 watts RMS x 2 at 2 ohms) * 480 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) * variable filters (low-pass from 50-250 Hz, high-pass from 80-1200 Hz, at 12 dB per octave) * variable bass boost (0-12 dB at 45 Hz) *

Description:

Whether adding to an existing system or including your Baja amplifier in a new system, you are certain to notice immediate performance benefits.

Description:

Power for the people with "In-Your-Face" wattage, the new Ultra Power Amplifiers provide an outstanding boost to any mobile audio system. UPA amps feature MOSFET power outputs that provide clear, crisp, dynamic audio. The sleek, low-profile housing...

Description:

Give your sub more raw power with this Profile mono-channel amplifier. The built-in low-pass crossover gets every bit of the low-end frequency to your sub, and the bass boost gives you even more punch.

Description:

Description:

Whether adding to an existing system or including your Baja amplifier in a new system, you are certain to notice immediate performance benefits.

Description:

- Profile AP1000M 1000W Mono Block Subwoofer MOSFET Amplifier - Peak Output Power (4 Ohms) : 650W x 1 - RMS Output Power (4 Ohms) : 310W x 1 - Peak Output Power (2 Ohms) : 1000W x 1 - RMS Output Power (2 Ohms) : 500W x 1 - MOSFET Power Supply : Yes - Total Harmonic Distortion : <0.05% - Signal / Noise Ratio : 103 dB - High/Low Level Converter (Male RCA) : Yes - Pre-Amp (RCA) Outputs : Yes - Variable Bass Boost at 45Hz : 0 - 12 dB - Variable Treble Boost at 8kHz : No - 12dB/Octave Crossover (High Pass/Full/Low Pass) : LP (Built-In) - Variable LP Crossover Frequency : 50 - 250 Hz - Bass Level Remote Control (16.4 ft) : Yes - Variable 12dB/Octave Subsonic Filter : 20 - 50 Hz - Variable Phase Control : 0 - 180 - Fuse (s) : 2 x 30A - Dimensions (2" H x 10 1/4" D) : 13 5/8"W

Description:

4-channel car amplifier * 80 watts RMS x 4 at 4 ohms (160 watts x 4 at 2 ohms) * 225 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) * variable high-pass filter (80-1200 Hz at 12 dB per octave) for channels 1/2 * variable low-pass filter (50-250 Hz at 12 dB per octave) for channels 3/4 * selectable treble boost (0/6/12 dB at 8 kHz) for channels 1/2 *

Description:

mono subwoofer car amplifier * 200 watts RMS x 1 at 4 ohms (350 watts x 1 at 2 ohms) * variable low-pass filter (50-250 Hz at 12 dB per octave) * selectable bass boost (0/6/12 dB at 45 Hz) * variable subsonic filter (20-50 Hz at 12 dB per octave) *

Description:

2-channel car amplifier * 160 watts RMS x 2 at 4 ohms (240 watts x 2 at 2 ohms) * 480 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) * variable low-pass filter (50-250 Hz at 12 dB per octave) * variable bass boost (0-12 dB at 45 Hz) *

Description:

From California the entertainment capital of the world comes Profile. The company offers receivers, subwoofers, crossovers, equalizers, full range speakers, value-engineered amplifiers with built-in excitement, and more. Each series has its own unique styling, special features, and attractive price.

Description:

From California the entertainment capital of the world comes Profile. The company offers receivers, subwoofers, crossovers, equalizers, full range speakers, value-engineered amplifiers with built-in excitement, and more. Each series has its own unique styling, special features, and attractive price.

Description:

2-channel car amplifier * 100 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms) * 300 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) * variable filters (low-pass from 50-250 Hz, high-pass from 80-1200 Hz, at 12 dB per octave) * variable bass boost (0-12 dB at 45 Hz) *

Description:

2-channel car amplifier * 65 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms) * 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) * variable low- and high-pass filters (low-pass from 50-250 Hz, high-pass from 80-1200 Hz, at 12 dB per octave) * stereo or bridged mono output *

Description:

Whether adding to an existing system or including your California amplifier in a new system, you are certain to notice immediate performance benefits.

Description:

80 watts RMS x 4 at 4 ohms * 125 watts RMS x 4 at 2 ohms * 225 watts RMS x 2 bridged output at 4 ohms * 4-ohm stable in bridged mode * 2-, 3-, or 4-channel output *

Description:

Peak Watts: 300 x 2 - Bridged Watts: 450 x 1 - With Bass Boost - 93 db Signal to Noise Ratio

Description:

Profile CA-400M 400 W x 1 Ch Mono Subwoofer Amplifier

Description:

Peak Watts: 600 x 1 - With Bass Boost - 102 db Signal to Noise Ratio

Description:

1200W Two Channel Chrome Amplifier. Features MOSFET Circuitry, Power Light Strip, Built-in Electronic Crossover Network with Continuously Variable Low or High Pass Operation, Variable 18dB Bass Boost, Stable to 2 Ohms Stereo 4 Ohms Bridged, Tri-mode Operation, High and Low Level Inputs, One Pair RCA Line Outputs, Adjustable Input Sensitivity, Gold Plated RCA, Power and Speaker Connections.

Description:

Profile CL600M 600W Mono Block Chrome Amplifier

Description:

Peak Watts: 400 x 2 - Bridged Watts: 600 x 2 - With Bass Boost - 105 db Signal to Noise Ratio

Description:

Outputs: 1 Pair - Peak Watts: 150 x 4 - Bridged Watts: 225 x 4 - With Bass Boost - 105 db Signal to Noise Ratio

Description:

Profile CL600 600W Two Channel Chrome Amplifier

Description:

Peak Watts: 100 x 4 - Bridged Watts: 150 x 2 - With Built-in Crossover - With Bass Boost - 105 db Signal to Noise Ratio

Description:

Profile CL400 400W Two Channel Chrome Amplifier

Description:

Peak Watts: 150 x 2 - Bridged Watts: 225 x 1 - With Bass Boost - 105 db Signal to Noise Ratio