Pyle Car Amplifiers

Description:

Variable Hi/Lo Electronic Crossover Network / Switchable Bass Boost / Power and Protection LED Indicator / Blue Display / Variable Input Level Control Thermal / Overload / Short Circuit Protection Anti-Thump Turn-on Soft Turn-On Circuit Remote Turn On/Off Signal to Noise Ratio - 95db T.H.D - Less than 0.04% Frequency Response - 15Hz - 30KHz Dimensions - Height 10.63 x Width 1.42 x Length 8.75

Description:

Frequency response: 20Hz-20kHz 2-channel idgeableSpeaker/terminal connection and SPEAK ONDouble cooling fan110/220 volt switchableOverload and protection indicator

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Electronic Crossover Network;Bass Boost Circuit;Bridgeable at 4 Ohms;2 Ohm Stereo Stable;Gold Plated RCA Inputs;Line Outs for Left and Right Channel;Low Pass Filter Control;High Pass Filter Control;Remote Bass Level Control (optional);Power and Protection LED Indicators;Red Lighting Illumination;Side Leg Mounting;Soft Turn-on/Turn-off.

Description:

Variable Hi/Lo Electronic Crossover Network / Variable Bass Boost / Power and Protection LED Indicator / Blue Level Display / Variable Input Level Control

Description:

With Bass Boost

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Electronic crossover network;Bass boost circuit;Bridgeable at 4 ohms;2 Ohm stereo stable;Gold plated RCA inputs;Line outs for left and right channel;Low pass filter control;High pass filter control;Remote bass level control;Power and protection LED indicators;Red lighting illumination;Soft turn-on/turn-off.

Description:

Become the idol of your own living room with the Pyle P2001AT. Independent microphone treble, bass, and echo controls will have you sounding like a stage veteran in no time! Sing along with CDs, MP3s, the radio—even a movie. The P2001AT also functions as a full featured stereo receiver with a two-ohm stable, high-power hybrid amplifier section. Dual stereo speaker outputs, with five-way binding posts, let you power multiple zones of your home. Included are AM/FM antennas that connect to the built-in quartz synthesized tuner for crystal clear radio reception. All controls are backlit for operability in low light conditions. Remote control and MP3/iPod connection cable are included. Microphones not included. Features and Specifications: *Power output: 2 x 600 watts (1 kHz, peak power @ 2 ohms), 2 x 450 watts (1 kHz, peak power @ 4 ohms), 2 x 240 watts (1 kHz, peak power @ 8 ohms) *Frequency response: 40-15,000 Hz (±2 dB) *Two stereo RCA inputs *Stereo RCA record line-level output *Stereo RCA preamp output *Adjustable dual mono subwoofer outputs *Two 1/4" microphone inputs *3.5 mm stereo input *1/4" headphone output *AM/FM quartz synthesized tuner with auto station seek *Built-in rack ears *Dimensions: 3.1" H x 19" W x 13" D.

Description:

This listing is for a awesome brand new & factory sealed 3000 watt 2 ch car amplifier. The model is Pyle PLA2230. There is a 1 year warranty on this unitDetails * Sub Sonic Filter * Thermal / Overload / Short Circuit Protection * MOSFET PWM Power Supply * Power & Protection LED Indicators * Low Level Inputs * Gold Plated RCA Inputs & Outputs * Slim Size Amplifier Design For Easy Installation * Dimensions: 10.63'W x1.42'H x 17'L * Brand new & factory sealed

Description:

With Bass Boost

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These products will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.e.

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Multi Video Signal Amplifier;Easy Mounting;Video Output Gain Control;I Video Input;7 Video Output;Independently Adjustable Variable Level Controls.

Description:

Power & Protection LED Indicators / Soft Turn-On Circuit / Anti-Thump Turn-On / 95dB Signal to Noise Ratio / 15Hz- 30kHz Frequency Response Low Level Inputs Gold Plated RCA Inputs & Outputs Slim Size Amplifier Design For Easy Installation Thermal / Overload / Short Circuit Protection Remote Turn On/Off Less than 0.04% THD Dimensions - Height 10.63 x Width 1.42 x Length 15.75

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Variable Hi/Lo Electronic Crossover Network;Variable Input Level (Gain) Control;Switchable Bass Boost;Power and Protection LED Indicators;Low Level Inputs;Gold Plated RCA Inputs and Outputs;Slim Size Amplifier Design For Easy Installation;Thermal / Overload / Short Circuit Protection;Anti-Thump Turn-on;Soft Turn-On Circuit;Remote Turn On/Off.

Description:

Pyle PLMRA420 Waterproof Marine 1000 Watt 4 Channel MOSFET Amplifier

Description:

350 watts x 4 output 700 watts x 2 bridged output (350 watts x 2 + 700 watts x 1) Variable Hi/Lo electronic Crossover Network Gold plated RCA inputs Dimensions: 10.87'' x 2.26'' x 15''.

Description:

1500 Watts x 2 Output 3000 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Input Level (Gain) Control Variable Bass Boost Sub Sonic Filter Thermal / Overload / Short Circuit Protection MOSFET PWM Power Supply Power &...

Description:

Thermal - Overload - Short Circuit Protection / Variable Input Level Gain Control / Tri-Mode Configurable / Blue LED Level Display / Remote Bass Boost Variable Bass Boost (CH5 / CH6) 2 Ohm Stereo Stable Power ON LED Indicator Protection LED Indicator Gold RCA Inputs Soft Turn On/Off Low and High Pass Filter Controls (CH3 / CH4) Dimensions - Width 10.9 x Height 2.7 x Length 19.6

Description:

PYLE 19in 1200W STEREO PWR AMP/MIXER 70V NIC - 5-Channel 19" Rack Mount Stereo Power Mixer/Amplifier Features/ 5 Channel Mixer - 4 Mic Inputs XLR & 1/4'- 1 Stereo Line Input - 1/4' & RCA - 1 Mono Line Input RCA - 1 Stereo Phono Input RCA with Ground Screw - Effects Loop RCA In/Out - Mix Bus Jack to Connect Another PT910 - Stereo/Mono Selector A/B Speaker Selector - Stereo or Bridged Power into 4 or 8 Ohms - 70V Output (Mono) - Binding Post Outputs - L and R Master Volume Controls with Blue Light Illumination - Feedback Filter with Rotary Control - Thermal Overload Protection with Indicator - Clip LED Indicator - Heavy Duty Fan Cooling - Blue LED Level Display - Headphone Output Frequency Response: 10-50 kHz ±3dB - 110/220V Switchable - Dimensions: 5 3/8'H x 19'W x 14 7/16'

Description:

. 2 x 900W RMS at 4 ohms. 1800W max at 4 ohms bridged. Dual switchable bass boost. Dual variable electronic crossover network. Tri-mode capable. Gold-plated RCA inputs. High/low pass filter controls. 10 5/8'' W 1 1/2'' H x 12'' L

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Variable Input Level (Gain) Control;Power ON LED Indicator;Hi / Lo Impendence Input;Illuminated Top Panel;Overload / Short Circuit Protection;Anti-Thump Turn-On.

Description:

500 watts x 2 output 1000 watts x 1 bridged Variable Hi/Lo electronic Crossover Network Gold plated RCA inputs.

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Electronic Crossover Network;Bass Boost Circuit;Bridgeable at 4 Ohms;2 Ohm Stereo Stable;Gold Plated RCA Inputs;Line Outs for Left and Right Channel;Low Pass Filter Control;High Pass Filter Control;Remote Bass Level Control (optional);Power and Protection LED Indicators;Red Lighting Illumination;Side Leg Mounting;Soft Turn-on/Turn-off.

Description:

250 watts x 4 output 500 watts x 2 bridged output (250 watts x 2 + 500 watts x 1) Variable Hi/Lo electronic Crossover Network Gold plated RCA inputs Dimensions: 10.87'' x 2.26'' x 12''.

Description:

Pyle PLA4380 4 Channel 2000 Watts Eternal MOSFET Amplifier

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Electronic Crossover Network;Bass Boost Circuit;Bridgeable at 4 Ohms;2 Ohm Stereo Stable;Tri-Mode Capable;Gold Plated RCA Inputs;Line Outs for 1 and 2 Channel;Low Pass Filter Control;High Pass Filter Control;Remote Bass Level Control (optional);Power and Protection LED Indicators;Red Lighting Illumination;Side Leg Mounting;Soft Turn-on/Turn-off.

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Variable Hi/Lo Electronic Crossover Network;Variable Bass Boost;Variable Input Level (Gain) Control;MOSFET PWM Power Supply;Power ON LED Indicator;LED Protection Indicator;HI/Lo Impedance Input;Illuminated Top Panel;Thermal / Overload / Short Circuit Protection;Anti-Thump Turn-on.

Description:

300 watts x 2 output 600 watts x 1 bridged Variable Hi/Lo electronic Crossover Network Gold plated RCA inputs.

Description:

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.PRODUCT FEATURES:Variable Hi/Lo Electronic Crossover Network;Variable Bass Boost;Variable Input Level (Gain) Control;MOSFET PWM Power Supply;Power ON LED Indicator;LED Protection Indicator;Remote Bass Boost;HI/Lo Impedance Input;Illuminated Top Panel;Thermal / Overload / Short Circuit Protection;Anti-Thump Turn-on;Tri-Mode Configurable.

Description:

Pyle PLA2380 2 Channel 1400 Watts Eternal MOSFET Amplifier

Description:

900 watts x 2 output 1800 watts x 1 bridged Variable Hi/Lo electronic Crossover Network Dimensions: 10.87'' x 2.26'' x 17''.