Subwoofer car Car Amplifiers

Description:

Class A/B - 320W x 1 Chan. @ 4 Ohms - 500W x 1 Chan. @ 2 Ohms - 500 Watts Max

Description:

KICKER 08ZX5001 ZX-SERIES 500-WATT CLASS D MONO SUBWOOFER AMPLIFIER500W MAX;250W RMS;MONO SUBWOOFER AMPLIFIER;VARIABLE BASS BOOST: 0 DB- 18 DB AT 40 HZ; VARIABLE LOW-PASS FILTER: 50HZ-200HZ AT 24 DB PER OCTAVE;FIXED SUBSONIC FILTER: 24 DB AT 25 HZ; CLASS D DESIGN; DIM: 2.19"H X 12.13"W X 9.63"D

Description:

PRODUCT FEATURES:Class D amplifier circuitAluminum die cast heat sinkPower MOSFET switching power supplySpeaker level inputSignal sensing turn-on2ohm load capabilityLine output terminals (RCA) for extensionBlue illuminationGold-plated power and speaker terminalBuilt-in variable low-pass filterBuilt-in infrasonic filter

Description:

Your search for a reliable and clear sound amplifier ends with the Kicker ZX Series 08ZX10001 D Amplifier equipped with the KICKEQ bass boost. Featuring the heat sink design the Kicker amplifier keeps internal components cooler to last longer. With balanced differential inputs the Kicker 08ZX10001 Mono Subwoofer Car Amplifier eliminates unwanted system noise. The Kicker 08ZX10001 Amplifier comes with a LED power indicator that alerts you during current fluctuations. The Kicker amplifier includes a remote bass control and an optical endcap. The Kicker Amplifier’s dimensions are 16.7 x 2.1 x 9.7 inches (W x H x D) and weighs 13.95 lbs.

Description:

1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)

Description:

PRODUCT FEATURES:Remote subwoofer controlLine out (for system building)Variable low pass crossoverVariable bass boost 0 to +18dBStrapping capabilityStrap two amps together for twice the powerInput sensitivity selectorVariable subsonic filterPhase switchPower and protection LEDs

Description:

mono subwoofer amplifier * 375 watts RMS x 1 at 4 ohms (750 watts x 1 at 2 ohms) * variable low-pass filter (50-200 Hz at 24 dB per octave) * variable bass boost (0-18 dB at 40 Hz) * wired remote bass level control *

Description:

750W x 1 chan. @ 4 ohms • 2500W x 1 chan. @ 1 ohms Max • 1800W x 1 chan. @ 2 ohms Max • MOSFET power supply) - Tuned Bass EQ (0-18 dB bass boost) • Input voltage sensitivity selector

Description:

BOSS AUDIO OL5KD OUTLAW CLASS D MONOBLOCK POWER AMPLIFIER (5000W X 1 MAX, 2250W X 1 RMS, DIM: 2.63"H X 11.3"W X 17.13"L)INCLUDES REMOTE SUBWOOFER LEVEL CONTROL; SIGNAL-TO-NOISE RATIO: >100 DB;5000W X 1 MAX; 2250W X 1 RMS;DIM: 2.63"H X 11.3"W X 17.13"L

Description:

POWER ACOUSTIK BAMF2000/1D BAMF SERIES CLASS D MONO AMPLIFIER (600W)HIGH SPEED DIGITAL CIRCUITRY; FULLY REGULATED PWM POWER SUPPLY; 4-WAY PROTECTION CIRCUIT ; 1_ STABLE; BRIDGING SYNCHRONIZATION; VARIABLE LOW PASS40 HZ200 HZ; VARIABLE SUBSONIC FILTER20 HZ50 HZ; VARIABLE SUBWOOFER EQ @ 45 HZ; 0-180 PHASE SWITCH ; FREQ RESP: 15 HZ150 HZ; S/N RATIO: 100 DB ; THD: 0.5%; INPUTS SENSITIVITY: 200MV8V; DUAL MONO SPEAKER OUTPUT CONNECTORS; PLATINUM-PLATED HEAVY-DUTY POWER and SPEAKER TERMINALS ; REMOTE DASH MOUNT LOW LEVEL GAIN CONTROL WITH CABLE; SYSTEM-DISTRESS INDICATOR; 600W

Description:

Integrating a unique feedback loop design the JL Audio G-MAX Class D Amplifier ensures to provide superior power regulation. The JL G Series Class D Monoblock Subwoofer Amplifier has a maximum of 1200 watts RMS power output for expanded functionality. With the active on-board crossover sections the JL Audio G-Series Class D Amplifier delivers enhanced surround sound performance. This 1-channel amplifier is equipped with an optional remote bass level control for ease of usage. Featuring differential-balanced inputs the JL Audio G-MAX Mono Subwoofer Amplifier controls noise effectively and also ensures compatibility with a wide variety of sound sources.

Description:

mono subwoofer amplifier * 150 watts RMS x 1 at 4 ohms (300 watts x 1 at 2 ohms) * low-pass filter (80 Hz at 24 dB per octave) * bass boost (12 dB at 40 Hz) * wired remote bass level control *

Description:

Mono Amplifier 800 watts RMS x 1 at 4 ohms,1-ohm stable,Class-D design

Description:

mono subwoofer amplifier * 500 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms) * Dynamic Thermal Management cooling system * Differential Input circuitry eliminates hum * variable low-pass filter (35-250 Hz, 24 dB/octave) * subsonic filter (28Hz) * variable bass boost (0-18 dB at 45 Hz) *

Description:

Need a dedicated amp to drive a subwoofer? Rockford Fosgate has you covered with the Punch P3001. Slam your sub with 150 watts of RMS power at 4 ohms (or 300 watts at 2 ohms), and listen as your bass comes to life. With its clean circuit design, MOSFET power, and proprietary technology, excessive noise is never a problem with a Punch amp. The P3001 can bring out extraordinary impact in your music, driving your subwoofer with strength you just can't get from a lesser amp.

Description:

Power up your system with Alpine's V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.Alpine's high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.Rugged heat sinks and an extremely sophisticated thermal management processor that continuously monitors the amp's temperature, ensure nonstop output and stable, reliable performance.

Description:

The Heritage Class-D amplifier has been designed using the latest in electronic technology available today.This mono subwoofer amplifier is the result of advanced high speed switching technology that overcomes the less-efficient class AB design. The Heritage Class-D amplifier reflects your true appreciation for power bass reproduction in the mobile environment.The amplifier is designed for low-frequency information only and it is not capable of reproducing any mid/high-frequency information. This is due to the noise introduced into the signal by the switching speed of the power supply, which must be filtered out of the audio signal.The power supply incorporated into the Heritage amplifier is a DC to DC switching power supply designed to have adequate headroom for ever the most demanding peak and dynamic range found on today's CDs and recordings.

Description:

max Power 2-ohm 1000w X 2 Rms Power 4-ohm 300w X 2 Max Bridged Power 4-ohm 2000w X 1signal-to-noise Ratio 105db Thd 0.01% Dimensions: 11-3/4w X 2-11/16h X 15-13/16ltrimode Operation Bridgeable Remote Subwoofer Level Control Line And Speaker Level Inputsvariable Gain Control Power And Protection Leds Variable Lowpass Crossover High Pass Crossover0-+18db Variable Bass Boost Mosfet Power Supply

Description:

ZX is pure KICKER power, ultimately developed to fuse with KICKER subwoofers and speakers for an incredible musical experience in any vehicle. But ZX power can be used with any gear in any installation - there's an option for every need.ZX-Series Amplifiers provide power in stereo, multi-channel, hybrid, or mono formats and are available in 20 different models, allowing plenty of options to exactly match any installation. And they'll visually add to any system a dark, rugged touch that leaves no doubt to the sorcery going on under its shroud.

Description:

mono subwoofer amplifier * 200 watts RMS x 1 at 4 ohms (400 watts x 1 at 2 ohms) * variable low-pass filter (50-200 Hz at 24 dB per octave) * variable bass boost (0-18 dB at 40 Hz) * wired remote bass level control *

Description:

KICKER 08ZX7005 ZX-SERIES 4 X 75-WATT AMPLIFIER WITH 400-WATT SUB CHANNEL700W MAX; 85W RMS MAX; FREQ RESP: 20 HZ2000 HZ; DIM: 2.12H X 20L X 9.17W; BASS BOOST: 0 DB-18 DB @ 40 HZ; ZX SERIES 3-CHANNEL CLASS AB WITH CLASS D SUBWOOFER CHANNEL CAR AMPLIFIER; MOSFET POWER SUPPLY; INCLUDES WIRED REMOTE BASS LEVEL CONTROL; ELIMINATES UNWANTED NOISE IN A SYSTEM; THERMAL, VOLTAGE and SHORT CIRCUIT PROTECTION

Description:

1 x 3000 Watts RMS @ 4 OHMS 1 x 4000 Watts RMS @ 2 OHMS 1 x 6000 Watts RMS @ 1 OHM Mono Block Subwoofer BIG POWER Amplifier 1 Ohm Stable MOSFET Power Supply PWM(Pulse-Width-Modulated) System Glass Epoxy PCB Gold plated RCA Inputs Gold plated Line outs...

Description:

mono subwoofer amplifier * 350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) * frequency response: 20-200 Hz * variable low-pass filter (40-200 Hz, 24 dB/octave) *

Description:

12" CompVT Series Subwoofer and Enclosure • 400W RMS (when in a larger enclosure) • Injection molded cone • Santopreene surround • Perimeter venting • High-temp coil wire • ZX Series 2-Channel Class AB Car Amplifier • 200W RMS power output (a great...

Description:

Directed 5-Channel Class D Car Amplifier • 80W x 4 + 280W x 1 @ 4 ohms • 125W x 4 + 400W approx. x 1 @ 2 ohms • 600W x 1 chan. @ 1 ohm • 2200W Max • MOSFET Power Supply • Switchable Line Output/Subwoofer Input

Description:

PRODUCT FEATURES:Line and speaker level inputs0 to +18dB variable bass boostMOSFET power supplyVariable low pass crossoversVariable high pass crossoversInput gain controlInput sensitivity selectorPower and protection LEDs

Description:

ZX is pure KICKER power, ultimately developed to fuse with KICKER subwoofers and speakers for an incredible musical experience in any vehicle. But ZX power can be used with any gear in any installation - there's an option for every need.ZX-Series Amplifiers provide power in stereo, multi-channel, hybrid, or mono formats and are available in 20 different models, allowing plenty of options to exactly match any installation. And they'll visually add to any system a dark, rugged touch that leaves no doubt to the sorcery going on under its shroud.

Description:

Class D / 1300-Watts Max Power / 5-300Hz Frequency Response / Variable Crossover provides control over a device's cutoff 50A Current Drain at rated output Dimensions - Width 15.8 x Height 2.2 x Depth 10.8 Weight - 11.9 pounds

Description:

Power Output: 1 x 200 W RMS @ 4 Ohms * Power Output: 1 x 300 W RMS @ 2 Ohms * Power Output: 1 x 450 W RMS @ 1 Ohms * Signal To Noise Ratio: > 95 dB * Input Signal: 0.2 - 9.0 V * Dimensions (W/H/D): 9.84 x 2.03 x 8.3 inch * Space-saving focused mass...

Description:

Amplifiers: Chrome Series with Light-up Blue aLEDSa Wired Bass Remote with LED Built-in Full Crossover Variable Low Pass Filter (LPF) 30Hz-250Hz Variable High Pass Filter (HPF) 50Hz-1KHz Variable Bass Boost (0-18dB)