Car speaker Car Speakers

Description:

Features: 165mm (6-1/2") 2-way coaxial. 25mm (1") v.coil. 72mm (2-7/8") magnet. TN 37 B orientable tweeter. Max. power handling: 120W. Nominal, power handling: 60W. Sensitivity (2.83 V/1m): 92dB. Frequency response: 60Hz-18kHz. Grill included.

Description:

6-1/2" 2-way car speakers for shallow mounts * Dynamic Balance polymer/mica composite woofer with butyl rubber surround * 3/4" liquid-cooled silk/polymer composite dome tweeter * power range: 6-55 watts RMS (165 watts peak power) *

Description:

5-way 6"x9" speakers (pair) * fiber-textured mica-injected polypropylene woofer * 4-ohm impedance * recommended power range: 2-90 watts RMS * frequency response: 28-30,000 Hz * sensitivity: 93 dB *

Description:

2 way car speakers, 240 watt Peak power, 2-80 watts RMS, polypropylene mica woofer cone, Silk dome tweeter, Grilles included

Description:

3-way 6"x9" speakers (pair) * polypropylene woofer cone with Santoprene surround * 3/4" Kaladex dome tweeter * 1" dome midrange * power range: 6-100 watts RMS (300 watts peak power) *

Description:

Pioneer TS-A4103 4"X10" Speakers

Description:

3-way 6-1/2" speakers (pair) * fits 6-3/4" openings * fiber-textured mica-injected polypropylene woofer * 4-ohm impedance * recommended power range: 2-40 watts RMS * frequency response: 35-22,000 Hz * sensitivity: 92 dB *

Description:

6-1/2"/6-3/4" 4-way car speakers (pair) * Highly Oriented Polyolefine (HOP) woofer with Santoprene rubber surround * 1-1/2" High Density Layered Diaphragm (HDLD) balanced diaphragm midrange * 3/4" piezoelectric dome tweeter and 1/2" piezoelectric dome supertweeter * power range: 2-75 watts RMS (300 watts peak power) *

Description:

6-1/2" 4-way car speakers (pair) * also fits in 6-3/4" speaker openings * injection-molded polypropylene woofer reinforced with basalt, graphite, and Aramid fibers (rubber surround) * 7/16" PET cone tweeter * 3/4" lightweight diaphragm dome midrange * power range: 2-50 watts RMS (280 watts peak power) *

Description:

6-1/2" Component Car Speakers 6-3/4" injection-molded mica-filled polypropylene woofer with butyl rubber surround,3/4" silk dome tweeter,15-100 watts RMS power range

Description:

3-way 6"x9" speakers (pair) * 2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos) * Plus One® woven-glass-fiber woofer cone with hi-roll rubber surround * 1" edge-driven M.M.D.® dome tweeter * edge-driven ultra-high frequency (UHF) super-tweeter * computer-optimized outboard crossover with tweeter level control *

Description:

The TS-C520PRS 5-1/4" Premier PRS component speaker package features 3-Layer IMX (Injection Molded Matrix) Composite cone woofers for exceptional sound quality, high density micro fiber surround for smoother response and 1-1/8" lightweight soft dome tweeters.The PRS speakers come with woofers featuring 2nd generation multi-layer cones. These are patent-pending cones with Composite Foamed IMPP, which uses Interlaced Aramid Fiber sandwiched between Aramid Fiber (woven carbon-blended fiber) and glass fiber layers. This combination ensures greater rigidity and superior resistance against bending - ideal for reproducing midrange sound.The woofer for these PRS speakers is surrounded by high-density Micro Fiber. This material is not only extremely lightweight, but also features superior physical properties such as lower mechanical resistance and lower internal loss in comparison to other materials. This means that its linearity is truly excellent, allowing the voice coil's short winding length to be sued to its full potential. Plus, Micro Fiber is much less flexible than other materials, which stops unwanted "rolling" of the vibration system. This allows high power input for the speaker, with fantastic sound reproduction.Concept and style will pop up in your head when you see clear outboard crossovers for the PRS speakers.

Description:

Infinity Reference has been engineered to deliver best-in-class performance for those looking to replace or upgrade their factory speakers. Features like Infinity's Plus One (patnet pending) woofer cones and edge-driven-dome tweeters have helped position Infinity Reference as the number-one line of automotive loudspeakers for the past six years straight.Plus One woofer cones patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.Infinity Reference speakers have two-ohm voice coils. This unique approach extracts more power from your amp or head unit. Many factory OE systems include two-ohm speakers. Infinity Reference speakers are perfect for those applications. If your head unit or amplifier is rated to drive a four-ohm load, Infinity Reference speakers are still the best option.Edge-driven textile dome tweeters are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.The 6022si also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB.ou are looking for a brighter sound, set the tweeter at +3dB.

Description:

The Type-S speaker line is a perfect sound solution upgrade. If you want to add incredible sounding Alpine speakers to your system, this is the way to go. This offering from the popular Type-S family of speakers is a best bet upgrade, and still budget-friendly.You can easily install the speakers into your stock speaker locations. A shallow mounting design allows for easy installation in a wide range of door panels giving you a perfect fit. Their high-efficiency design can run off of the built-in amplifier power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle.Turn up the volume. These speakers deliver amazing lows, mids, and highs. Become a believer once you hear the difference between stock and Alpine sound quality. Upgrade your system and see what you've been missing.The Type-S coaxial speakers use a soft dome silk tweeter for excellent high frequency sound reproduction. The tweeters can swivel up to 10 degrees so you can adjust for the optimum listening position.

Description:

2-way 6-3/4" speakers (pair) * polypropylene woofer cone with Santoprene surround * 3/4" Kaladex dome tweeter * power range: 6-65 watts RMS (195 watts peak power) *

Description:

To create D-series speakers, Pioneer developed the industry's first basalt fiber made from natural rock interwoven with aramid fiber. Used in the surface layer, this aramid/basalt fiber material is highly rigid and better absorbent, enhancing stability and maintaining integrity throughout a wide temperature range.D-Series speakers feature an exclusive rear chamber tweeter enclosure that Pioneer first used in the famed PRS speakers. It extends mid-range frequency for improved vocal imaging and staging.The built-in -12dB/octave HPF and LPF crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection.

Description:

2-way 6"x9" speakers (pair) * polypropylene woofer cone with Santoprene surround * 1" Kaladex dome tweeter * power range: 6-90 watts RMS (270 watts peak power) *

Description:

2-way 6"x9" speakers (pair) * 2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos) * Plus One® woven-glass-fiber woofer cone with hi-roll rubber surround * 1" rotating UniPivot, edge-driven M.M.D.® dome tweeter * computer-optimized outboard crossover with tweeter level control *

Description:

Woven Glass Fiber Cones

Description:

3-way 6"x8" speakers (pair) * Aramid fiber-reinforced carbon graphite IMPP woofer with butyl rubber surround * 1-1/4" laminated polyester fiber balanced dome midrange and 3/8" PET silver film dome tweeter * frequency response: 35-32,000 Hz * recommended power range: 2-40 watts RMS *

Description:

4-way 6"x9" speakers (pair) * fiber-textured mica-injected polypropylene woofer * 4-ohm impedance * recommended power range: 2-80 watts RMS * frequency response: 28-30,000 Hz * sensitivity: 93 dB *

Description:

with Polypropylene Cones

Description:

BOSS AUDIO D69.3 DIABLO SPEAKER (6" X 9", 3-WAY, 600W, 65 OZ MAGNET, 4_, FREQ RESP: 45 HZ20 KHZ)POLY-INJECTION CONE MATERIAL;6" X 9";3-WAY; 600W PEAK;65 OZ MAGNET;IMP: 4_; FREQ RESP: 45 HZ20 KHZ

Description:

2 Way - Speakers mineral~filled polypropylene woofer - .75" silk dome tweeter - 25~75 watts RMS power range

Description:

225 Watts - 2-Way

Description:

2-way 6"x9" speakers (pair) * copolymer woofer cone with rubber surround * 3/4" Type-S3 soft dome tweeter * power range: 2-35 watts RMS (120 watts peak power) *

Description:

6-1/2" 180W 2-Way GTO Series Speaker System

Description:

6 x 9" 3-way Car Speakers mica-injected polypropylene woofer,1-3/4" mylar cone midrange , 1/2" mylar balanced dome tweeter,2-60 watts RMS power range

Description:

50 Watts - 4 Way - Fiber Composite Cone - Dome Tweeter - 30-30000 Hz