Kicker Car Subwoofers

Description:

KICKER Solo-Baric L7 Subwoofer remains the most capable subwoofer on Earth. Without question, it's the best-looking, best-sounding square subwoofer available. And it's the only patented one that provides more cone, more air, and more decibels.KICKER engineers left it all on the table for this redesigned Solo-Baric L7, taking cues from the award-winning original that debuted as groundbreaking at the turn of the millennium, and then improving on them. Let there be no doubt, it's the most complete KICKER subwoofer ever developed.The Solo-Baric L7 still revolves around the breakthrough SoloKon, the one-piece, injection-molded cone with full-coverage back bracing that pushes more air and creates louder bass than any like-size round subwoofer. It's good enough that KICKER uses SoloKon across the board as the cornerstone for each subwoofer in the KICKER bass-making family.SoloKon may be a rock star, but it's the unshakeable motor structure behind the scenes that propels it to the forefront. Minor tweaks have given the motor an outstanding rep - dual high-temp voice coils, poly-cotton semi-progressive spider, Spiralead tinsel-lead technology, highly-efficient UniPlate pole-piece/back plate, and a heat-reducing T-cut top plate for enormous power handling. And it's never been cooler with a new solid pole piece that disperses more heat than ever before, and more venting near the SoloKon back brace and spider landing.The distinctive cast-aluminum basket with spring-loaded terminals wraps around and protects these specialized inner workings, with the Solo-Baric crest branded into the back plate.The Solo-Baric L7 remains available in 2-Ohm DVC and conducts business from a sealed or vented box application.

Description:

12" subwoofer with dual 4-ohm voice coils * injection-molded polypropylene cone * ribbed Santoprene rubber surround * suitable for marine use * power handling: 50-400 watts RMS (200 watts per coil) *

Description:

ported hatchback-style enclosure with two 12" CompVR subwoofers * 2-ohm total impedance * power handling: 50-800 watts RMS (1,600 watts peak power) * 32-3/4"W x 16-1/4"H x 17-1/2"D1 x 14-1/4"D2 * warranty: 1 year *

Description:

You crave the bump in your car like your buddy's, but you're lacking the bank needed to throw down on a new system. Don't let a shortage of funds prevent you from turning heads at every light.The KICKER Comp Subwoofer swings the hammer better than anything else, while leaving enough bills to lay down on a power-packin' KICKER amplifier too. It's got all the KICKER engineering firsts that made KICKER subs famous - flex-fighting Inverted Structural Dome (ISD), double stitching on the surround, coil-cooling perimeter venting, and use in free-air applications as well as in vented or sealed boxes. But a rebalanced motor structure, along with revamped cosmetics, gives Comp users more bang for their well-earned buck than ever before.

Description:

KICKER 08S15L74 SOLO-BARIC L7 15" SUBWOOFER2000W MAX; 1000W RMS; 15 TITANIUM DEPOSIT IMPREGNATED CONE WOOFER WITH ROLLED OUTER EDGE; FREQ RESP: 18 HZ- 100 HZ; SENSITIVITY: 89 DB; IMP: 4_; DUAL 4_ VOICE COILS; SANTOPRENE RUBBER SURROUND; FULL COVERAGE BACK BRACING; POLY-COTTON SEMI-PROGRESSIVE SPIDER; HEAT-REDUCING T-CUT TOP PLATE; SOLID POLE PIECE; CAST-ALUMINUM BASKET; SPRING-LOADED TERMINALS

Description:

CVX15 15" CompVX Dual 4 ohm voice coils 2000 watts max power handling 1000 Watts RMS power handling 8 1/4" mounting depth

Description:

6.5" 4-ohm subwoofer * injection-molded polypropylene woofer cone with ribbed Santoprene surround * works in free-air applications * power handling: 50-150 watts RMS (300 watts peak power) * frequency response: 30-350 Hz *

Description:

15" subwoofer with dual 4-ohm voice coils * square SoloKon polypropylene cone with Santoprene rubber surround * power range: 75-750 watts RMS (375 watts per voice coil) * peak power: 1,500 watts * frequency response: 18-100 Hz *

Description:

ported truck-style enclosure with one 10" L7 Solo-Baric subwoofer * 3/4" medium density fiberboard construction covered with gray and black carpet * 2-ohm total impedance * recommended power: 50-600 watts RMS (1,200 watts peak power) * 21-1/2"W x 15"H x 10"D1 x 6-11/16"D2 *

Description:

The Kicker C124 Comp (short for "competition") delivers out-of-this-world bass at a down-to-earth price. With a cool, updated appearance, the C124 12" sub delivers gut-busting bass in a variety of enclosures. Instead of a traditional dustcap, the Comp features Kicker's Inverted Structural Dome for unmatched structural integrity. The polymineral cone is rigid to resist flexing. The polyester foam surround is double-stitched to the cone for added strength. Perimeter venting keeps the voice coil cool for truer sound. Newly engineered top plates, larger voice coils, and upgraded coil wire increased the heat tolerance and power handling, giving the user the most durability and most bass ever from a Comp subwoofer. When you see it, and hear it, you'll want it. peak power handling 300 watts sensitivity 88.6 dB SPL top-mount depth 5-5/8 Recommended Q-Logic Box Type - 2, 3 1-year warranty

Description:

KICKER 07VC124 SINGLE COMP 12" SUBWOOFER IN VENTED BOX600W MAX; 300W RMS; DUAL 12 VENTED ENCLOSURE WITH COMP SUBWOOFERS; IMP: 2_; .75 MDF CONSTRUCTION; HEAVY-DUTY BLACK CARPET COVERING; OVERSIZED PORTS WITH FLARED ENDS FOR EFFICIENT AIRFLOW and NO NOISE; DIM: 16H X 32W X 17D (BOTTOM) and 13D (TOP)

Description:

10" subwoofer with dual 2-ohm voice coils * square SoloKon polypropylene cone with Santoprene rubber surround * power range: 50-450 watts RMS (225 watts per voice coil) * peak power: 900 watts * frequency response: 24-100 Hz *

Description:

You crave the bump in your car like your buddy's, but you're lacking the bank needed to throw down on a system. Don't let a shortage of funds prevent you from turning heads at every light.The KICKER Comp subwoofer swings the hammer better than anything else, while leaving enough bills to lay down on a power-packin' KICKER amplifier too. It's got all the KICKER engineering firsts that made the KICKER subs famous. But a rebalanced motor structure, along with revamped cosmetics, gives Comp users more bang for their well-earned buck than ever before.The TC10 is a slim-profile sealed truck box.

Description:

ported hatchback-style enclosure with one 12" Solo-Baric L7 subwoofer * 3/4" medium density fiberboard construction covered with gray and black carpet * 2-ohm total impedance * recommended power: 50-750 watts RMS (1,500 watts peak power) * 18-3/4"W x 16"H x 18"D1 x 14-11/16"D2 *

Description:

When you hear the L5, you'll know exactly why KICKER owns the patents on square subwoofer design. Taking several cues from its master L7, the Solo-Baric L5 is no stepchild. It inherits the cutting-edge SoloKon, the one-piece, ultra-rigid cone that utilizes rear bracing for maximum strength as the volume climbs. The punishing 15-inch L5 even requires dual bracing to control its massive excursion capabilities.Digging deeper, the L5 contains a T-shaped top plate that widens the motor's magnetic field, significantly increasing upper bass response. Its wide poly/cotton spider handles high excursions flawlessly, thanks to the increased diameter and a unique shape. The sub's improved voice coil now rates to 220 incinerating degrees Celsius, which keeps your bass raging longer than ever. And with a stamped-steel basket, rugged magnet boot, and super-grip front gasket, the Solo-Baric L5 gives any woofer in the neighborhood a run for its money.

Description:

The Kicker C15-4 Subwoofer is equipped with double stitching on the surround, coil-cooling perimeter venting and ISD (Inverted Structural Dome). Highly versatile, it performs in free-air applications as well as invented or sealed boxes. The rigid cone's back bracing eliminates distortion, delivering a wonderful bass. Spiral tinsel-lead provides even more strength and durability. The ribbed surround, yellow stitching, nickel-plated push terminals and a basket design include a stylish logo trim ring. Xmax - 11.53 mm Top Mount Depth - 7-3/8 Cutout Diameter - 13-7/8

Description:

12" subwoofer with dual 2-ohm voice coils * injection-molded polypropylene cone * ribbed Santoprene rubber surround * suitable for marine use * power handling: 50-400 watts RMS (200 watts per coil) *

Description:

12" subwoofer with dual 4-ohm voice coils * square SoloKon polypropylene cone with Santoprene rubber surround * power range: 50-750 watts RMS (375 watts per voice coil) * peak power: 1,500 watts * frequency response: 20-100 Hz *

Description:

sealed truck style enclosure with one 12" CompVT subwoofer * 3/4" medium density fiberboard construction covered with gray and black carpet * 2-ohm total impedance * power handling: 50-400 watts RMS (800 watts peak power) * 21-3/4"W x 13-7/16"H x 7-1/8"D1 x 3-15/16"D2 *

Description:

CompVR-Loaded Sub Boxes provide more crushing but easy-to-install bass, with two single sizes of anarchy to go along with its duo of wicked dual-sub boxes. These boxes take the reputation and reliability of dual-voice-coil CompVR subwoofers and combine them with legendary KICKER wood enclosures.

Description:

Dual 2-ohm voice coils for wiring flexibility, polymineral cone, peak power handling 1000 watts.

Description:

When you hear the L5, you'll know exactly why KICKER owns the patents on square subwoofer design. Taking several cues from its master L7, the Solo-Baric L5 is no stepchild. It inherits the cutting-edge SoloKon, the one-piece, ultra-rigid cone that utilizes rear bracing for maximum strength as the volume climbs. The punishing 15-inch L5 even requires dual bracing to control its massive excursion capabilities.Digging deeper, the L5 contains a T-shaped top plate that widens the motor's magnetic field, significantly increasing upper bass response. Its wide poly/cotton spider handles high excursions flawlessly, thanks to the increased diameter and a unique shape. The sub's improved voice coil now rates to 220 incinerating degrees Celsius, which keeps your bass raging longer than ever. And with a stamped-steel basket, rugged magnet boot, and super-grip front gasket, the Solo-Baric L5 gives any woofer in the neighborhood a run for its money.

Description:

KICKER 08S8L54 SOLO-BARIC L5 8" SUBWOOFER600W MAX; 300W RMS; 8 TITANIUM DEPOSIT IMPREGNATED CONE WOOFER WITH ROLLED OUTER EDGE; SANTOPRENE RUBBER SURROUND; FREQ RESP: 28 HZ- 100 HZ; SENSITIVITY: 85 DB; DUAL 4_ VOICE COILS; REAR FOAM GASKET; SPRING-LOADED TERMINALS; VENTED 360 BACK BRACING; POLY-COTTON SEMI-PROGRESSIVE SPIDER; HEAT-DISPERSING, SOLID SOLE PIECE; TOP-MOUNTING DEPTH: 4.75

Description:

Now from KICKER, a true high-performance subwoofer with a reduced mounting depth that pounds unmercifully from the slimmest locations. The new CompVT Subwoofer gives you all the bass you can stand in the narrowest working space! No thin mids here it's real KICKER bass that can take serious power! Both the 12-inch CVT12 and 10-inch CVT10 easily handle 400 watts RMS (800 peak) without hesitation. A special four-layer voice coil provides the CVT the ability to work with severe amounts of power as do conventional KICKER woofers, without the bulk. Bold KICKER engineering allowed the breakthrough CVT to hammer with such limited room. The woofer's round, injection-molded cone is shaped to provide maximum excursion from a slender basket. Its new ventless, solid-pole design allows it to be mounted directly against the rear wall of its small sealed or vented enclosure. Also, the spring-loaded binding posts are mounted differently than standard subwoofers to minimize size. Finally, subtract enclosure wall depth from the equation as well with a handy steel clearance adapter plate. These space-saving moves make for woofers with an amazing mounting depth of less than 4-1/2 inches! Another first from KICKER CVT subwoofers utilize SpiraleadTM tinsel-lead technology, which allows the ideal amount of flex for better strength and durability. It remains KICKER through-and-through. The cone's modified spoke design, 360-degree back bracing, and ribbed Santoprene® surround make KICKER woofers sound better than ever. UniplateTM backplate and pole, perimeter venting, high-temp coil wire, double-stitching, logo trim ring around the steel basket's outer edges all features that make KICKER woofers the best sounding and most reliable in the world.

Description:

Single 10" Sealed Slim Truck Sub Enclosure Loaded with a Solo Classic Subwoofer • 4 Ohms • 900 Watts Max • 450 Watts RMS • 3/4" MDF Construction • Accurate, Detailed Bass • High Performance in a Small Box

Description:

ported truck-style enclosure with one 10" L5 Solo-Baric subwoofer * 3/4" medium density fiberboard construction covered with gray and black carpet * 4-ohm total impedance * recommended power: 50-450 watts RMS (900 watts peak power) * 21-1/2"W x 15"H x 10"D1 x 6-11/16"D2 *

Description:

8" Shallow mount subwoofer, 4-ohm voice coil, 400W Peak (200W RMS), injection molded cone, vent-less solid pole design

Description:

900W MAX POWER, 450W RMS; 8inch SOLO-BARIC SUBWOOFER WITH RIBBED SANTOPRENE SURROUND; FREQ RESP: 28 HZ - 100 HZ; IMP: 2_ OR 4_ DVC; SENSITIVITY: 83.6 DB; SOLOKON FOR STRENGTH & ACCURACY; T-CUT TOP PLATE FOR HIGH MAGNETIC FIELD STRENGTH; ALUMINUM COIL FORMER; POLE VENTING AT CONE BRACE; STITCHED & GLUED TINSEL LEADS ENABLE HIGH EXCURSION; CUT OUT DIM: 7.25inch SQUARE; MOUNTING DEPTH: 4.75inch

Description:

The KICKER Comp subwoofer swings the hammer better than anything else, while leaving enough bills to lay down on a power-packing KICKER amplifier too. It's got all the KICKER engineering firsts that made its subs famous - flex-fighting Inverted Structural Dome (ISD), double stitching on the surround, coil-cooling perimeter venting, and use in free-air applications as well as in vented or sealed boxes. But a rebalanced motor structure, along with revamped cosmetics, gives Comp users more bang for their well-earned buck than ever before.Engineered top plates, larger voice coils, and upgraded coil wire increased the heat tolerance and power handling, giving the user the most durability and most bass ever from a Comp subwoofer. The rigid cone has inherited back bracing to totally eliminate distortion. When they see it, they'll want it. Pitch-black cone, ribbed surround with yellow stitching, basket design with a logo trim ring, and nickel-plated push terminals intimidate those who gaze upon it.The 10-inch Comp has a powder-coat finish and stainless-steel hardware, meaning it's marine-ready for a day on the water.

Description:

Peak Power: 1500 Watts