Power 1-channel Amplifier (More)
Slam your speakers with a one-two combination of power and control with the Punch P4004 amplifier! With its innovative circuit design, MOSFET output stages, and proprietary technology, the P4004 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 50 watts RMS by four channels to power two sets of full-range or component speakers or you can bridge the P4004 for 200 watts RMS x 2 for a pair of subs. (More)
Frequency Response: 5 to 50kHz - Peak Power: 1200 Watt (More)
7 reviews
Enjoy the tight, hard-hitting bass of the 5001 by KLH. It features a 12" polymer-coated woofer and a 12" polymer-coated passive radiator to provide ample bass. (More)
Features: Rated Power: 150 W RMS @ 1.5 ohm-4 ohm (11V-14.5V) Rated Power (bridged): 300 W RMS x 1 @ 3 ohm-8 ohm(11V-14.5V) THD at Rated Power: S/N Ratio*: >108.5dB below rated power Frequency Response: 5 Hz - 30 KHz (+0, -1dB) Damping Factor: >200 @ 4 ohm per. ch./50 Hz Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 13.4"L x 9.25"W x 2.36"H Differential-Balanced Input Topology: (1 pair of inputs) On-board Crossover: fully-variable (50Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Preamp Output: 2-channel (full-range, LP or HP) Speaker output connections: accept up to 8ga. wire +12V and Ground connections: accept up to 4ga. Wire (More)
2 reviews
Features: Rated Power(stereo): 75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V) Rated Power (bridged): 150 W RMS x 2 @ 3 ohm-8 ohm(11V-14.5V) THD at Rated Power: S/N Ratio*: >108.5dB below rated power Frequency Response: 5 Hz - 30 KHz (+0, -1dB) Damping Factor: >200 @ 4 ohm per. ch./50 Hz Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 13.4"L x 9.25"W x 2.36"H Differential-Balanced Input Topology: (2 pair of inputs) Front Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Rear Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave) Speaker output connections: accept up to 8ga. wire +12V and Ground connections: accept up to 4ga. Wire (More)