AUTO BPM COUNTEREquipped with a counter that automatically measures and digitally displays a tracks BPM measurement range: 70-139 / 91-180 / 71-180 / Manual The DJM-600 provides a visual confirmation of a tracks tempo to allow the user to merge one song into another smoothly. Also, BPMs of tracks that are difficult to measure can be manually input by tapping on the TAP button. AUTO BEAT SAMPLERThis is a new DJ function that allows you to sample your favorite sources and play them back easily at the touch of a button. The BPM is measured digitally and recorded automatically exclusively for designated beats. ( 1 / 2 / 4 / 8 / 16 ) beats, Maximum interval: 6 seconds. If set to the Stand-By mode when no sound is present, the function automatically starts and stops recording in response to the presence and absence of the input signal and achieves the correct sampling with perfect timing. Whats more, the user can edit the end position, making possible a wide diversity of playback effects by making use of three playback mode options and the cross fader start.SINGLE PLAY: Plays back the recorded sound once only when the button is being pressed.LOOP PLAY: Plays back the recorded sound repeatedly when the button is pressed.STRETCH LOOP PLAY: Extends or shortens the recorded sound in accordance with the mixed tracks BPM and plays back the sound repeatedly. Sampler info: Sampling rate: 44.1 kHz Resolution: 16 bit stereo A/D converter 20 bit Sampling time 8 seconds AUTO BEAT EFFECTORLinked to BPM, the DJM-600 can add effects to each CH, MIC and MASTER independently. The user can produce music that makes full use of high-level DJ techniques by performing quick setting with the Beat Unit Switch button, adjusting the precise time parameters, or controlling the balance between the effect sounds and the original sounds by varying the mix ratio. Moreover, even when using the fader, it is possible to leave just the effect soun...
