Dyson replacement roller brush

sort by:
view as:      
add tax & shipping for
 
 
 
  • product
Replacement brush for newer Dyson DC-07 upright models that do not have a clutch system. Roller brush assembly includes both bearings and caps.
 
  • product
This is the replacement brush rollers that are used in the Dyson DC-15 "The Ball" upright models. It is often referred by beater bar. Both the left and the ride side roller brushes are sold together as a set. You should replace the roller brush after 3...
 
  • product
This is the switch that turns the roller brushes on/off on the Dyson DC15 Models. It is located right next to the switch that turns the vacuum cleaner on and off. It is replaced by unscrewing a single star bit screw right above where the dust bin...
 
  • product
Replacement Roller brush designed to fit only the Dyson DC-21 Stoway Canister vacuum cleaner. The roller brush should be replaced every 3 years in normal household conditions, or when the bristles on the brush have noticeably worn down. Genuine Dyson Part
 
  • product
These are the replacement roller brushes, also frequently called beater bars. Both the Left and Right side are included in this set. You can not purchase the Left and Right side separately. These brushes are easily removed from the vacuum by turning...
 
  • product
Genuine Dyson Part Replacement brush for newer Dyson DC-07 upright models that do not have a clutch system. Roller brush assembly includes both bearings and caps. Genuine Dyson part.
 
  • product
Electric power brush for the Dyson DC-21 Stowaway Canister vacuum cleaner. This is the motorized brush head that is used to clean carpeting. This item includes all parts including a new roller brush, and end caps. Easily remove the roller brush to...
 
  • product
This is the part that slides into the roller brush. When standing behind the vacuum as if you were vacuuming, this is the right side end cap. It is removed easily by turning the plastic screw sideways, and pulling up on the cap. Both the plastic screw,...
 
  • product
This is the part that slides into the roller brush. When standing behind the vacuum this is the left side end cap. It is removed easily by turning the plastic screw sideways, and pulling up on the cap. Both the plastic screw, and the bearing are...
 
  • product
This is the hose on the bottom of the vacuum that connects the agitator housing to the suction motor. It has a rubber seal on end of the hose (Included with this item) that connects to dust tray inside the roller brush housing. It is not the main hose...
 
  • product
This is the end cap that the roller brush slides into. It is replaced by rotating the plastic screw to the horizontal position, and then pulling up on the end cap. When standing in front of the vacuum cleaner it is the right side end cap. The plastic...
 
  • product
This is the end cap that the roller brush slides into. It is replaced by rotating the plastic screw to the horizontal position, and then pulling up on the end cap. When standing in front of the vacuum cleaner it is the left side end cap. The plastic...
 
  • product
This is the cleaner head replacement. It is the entire motorized brush assembly, and includes all part including a new roller brush. It is the entire front floor part of the vacuum. The roller brush and motor are sold separatley, please call for...