Kicker tweeter Electronics

Description:

two 1/2" Kaladex dome tweeters * flush-, surface-, and angled-mounting hardware included * power handling: 6-75 watts RMS (150 watts peak power) * frequency response: 4,500-21,000 Hz * sensitivity: 92 dB *

Description:

75 watts

Description:

Marine coaxial speaker 6

Description:

75-INCH 20MM TWT AND CROSSOVER

Description:

75-INCH 20MM TWT AND CROSSOVER

Description:

1-INCH 25MM TWT AND CROSSOVER

Description:

75 Watts - Semi-Dome Tweeter - 4500-21000 Hz

Description:

150w max power 75w rms .5 tweeter freq resp: 4.5 khz - 21 khz imp: 4_ sensitivity: 92 db @ 1w/1 m crossover point: 4.5 khz crossover slope: 12 db per octave smooth sound with ability to mount tweet...

Description:

KICKER HORN TWEETER

Description:

KICKER HORN TWEETER

Description:

150 Watts - Dome Tweeter

Description:

Easy installations are always good, but how about when you get hard-driving, smooth-sounding tunes to go with it?KICKER KS-Series Coaxials drop right in where your factory speakers were with an overhauled woofer and Livin'-Loud tweeter. Specially shaped metallic-blue woofer cones make super-clear sound effortlessly. Highs are louder and cleaner than ever with tenacious 3/4-inch tweeters.

Description:

2-way 6-3/4" speakers (pair) CIMP woofer cone with Santoprene surround 3/4" titanium dome tweeter power range: 5-65 watts RMS (195 watts peak power)

Description:

Dome Tweeter - 4500-21000 Hz

Description:

5.25" / 6" QS-Series 2-Way Component Speaker System • 180 Watts Max • 90 Watts RMS • 3-Layer TriTech Composite Cone Woofer • 30mm Tweeter • Selectable Tweeter Attenuation • Tweeters Can Be Mounted Coaxially

Description:

KICKER 07DS6502 DS-SERIES 6.5" COMPONENT SYSTEM120W MAX; 60W RMS; IMP: 4_; SENSITIVITY: 90 DB; FREQ RESP: 43 KHZ-20 KHZ; LP and HP CROSSOVERS: 12 DB/OCTAVE @ 4 KHZ; 6.5 2-WAY POLYPROPYLENE WOOFER WITH POLY-FOAM SURROND; .75 TITANIUM DOME TWEETER; INCLUDES GRILLES

Description:

6" (6.5") KS Series Car Speakers • 195W Max • 65W RMS • Injection molded polypropylene cone woofer • Santoprene surround • 3/4" Kaladex dome tweeter • Neodymium magnet with ferrofluid • 4 ohms impedance

Description:

Give factory sound a serious power injection with a KS-series coaxial speaker upgrade. With added improvements on the woofers and tweaked tweeters, dropping them in where factory speakers were seems like a no-brainer. The curvilinear, gray woofer cones, Santoprene surround, and designed basket give KS coaxials the extra brawn to deliver a smooth, rich sound at any volume.

Description:

6" x 8" / 5" x 7" Component speaker system, 90W Peak (45W RMS), Ribbed surround, Ÿ? Titanium dome Tweeter, 2-way crossover

Description:

Fits 5-Œ" & 5"x7", 130W Peak (65W RMS), 2-way Design, Santoprene® woofer surround, Neodymium tweeter magnet, 4 ohm impedance, Grilles and 5"x7" adaptor included

Description:

90 Watts - Dome Tweeter - 4500-21000 Hz

Description:

45 Watts - 2-Way - Graphite Composite Cone - Semi-Dome Tweeter - 45-20000 Hz

Description:

60 Watts - 2-Way - Polypropylene Cone - Dome Tweeter - 45-21000 Hz

Description:

90 Watts - 2-Way - Graphite Composite Cone - Semi-Dome Tweeter - 30-21000 Hz

Description:

75 Watts - 2-Way - Aluminum Cone - Dome Tweeter - 35-21000 Hz

Description:

90 Watts - 2-Way - Poly Carbon Cone - Dome Tweeter - 55-22000 Hz

Description:

6-œ" component speaker system, 100 watts RMS, Spring-Loaded Nickel Plated Terminals, High-dampening strength cast aluminum basket

Description:

Marine 6' Coax System w/.5 Inch Twtr polypropylene woofer with rubber surround,sealed motor structure and locking terminal covers,1/2" PEI film dome tweeter built into grille

Description:

6 1/2" 2-Way with Grilles polypropylene woofer with rubber surround,sealed motor structure and locking terminal covers,3/4" titanium dome tweeter built into grille

Description:

30 Watts - 2-Way - Semi-Dome Tweeter - 60-20000 Hz