Marine electronics transducer Electronics

Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$47
  • product
Trolling Motor Transducer Trolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a switch to allow the fishfinder to display information from either the transom or the trolling motor. Some Transom Mount Transducers can be converted to Trolling Motor Mount by purchasing a Trolling Motor Adapter. Description: Trolling Motor Transducer with Temperature Sensor, Hydrodynamic, dual beam, 20 and 60 degree cone angles, 200/83 kHz. Includes 15 cable, trolling motor mounting hardware. For Use With: Piranha 5, Legend ID40, Matrix 15, Matrix 17, Matrix 25, Matrix 17, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565

starting at

$47
 

starting at

$95
  • product
Designed for the value-minded boater, these Garmin Fishfinders offer Ultrascroll which allows boaters to get a much faster refresh rate on their sonar display. Dual beam 14/45 transducer provides improved performance in shallow or deep water. Also feature AutoGain for viewing more fish under all conditions, backlit display and keypad, See-Thru technology, auto and manual zoom, and alarms. 4-level gray scale FSTN display measures 3.3W x 3.3H with 128 x 240 pixels. Unit 6.1W x 4.9H x 2.6D.

starting at

$95
 

starting at

$31
  • product
Transom Mount Transducer Transom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer. Description: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 24 degree cone angle, high speed hardware. For Use With: WIDE 100, WIDE 128, 100SX, 105SX, 405SX, 405SX Plus, Pro Angler 400SX

starting at

$31
 

starting at

$1,779
  • product
* Thru-hull mount transducer * Operating frequency of 200 and 50 kHz * Beamwidth of 6 degrees at 200 kHz, 19 degrees at 50 kHz * Transducer kit comes with installation instructions - please follow these instructions carefully to ensure proper operationEvery Garmin product is designed to meet the most demanding standard: customers' satisfaction. That's why

starting at

$1,779
 

starting at

$61
  • product
The Humminbird DBK2 Marine Electronics Transducer with a built-in XTM 9 20 T dual beam has a coverage area of 2060 degrees at 20083 kHz frequency. To provide optimal protection from entanglement you can mount this dual beam transducer on your trolling motor easily. The Humminbird DBK2 Transducer is compatible with the Matrix 10 12 87c and 97 Piranha 2 and 4. It can also be used along with XP2000 and XP4000 all 300 and 100 series fish finders. Featuring a power cable and a product manual the Humminbird DBK2 Transducer provides ease of usage and maintenance. The Humminbird DBK2 Second Station Kit comes with a quick disconnect mounting system offering fast installation and removal.

starting at

$61
 

starting at

$56
  • product
Mounts on to the body of most trolling motors, with a low-profile, drag-reducing shapeIncludes 15-foot cable and connecting hardwareWide-side, 3-element allows it to look left, right or down, not recommended for high speedCompatible with many Wide and TX series Humminbird sonar systemsBacked by manufacturer's one-year limited warranty

starting at

$56
 

starting at

$146
  • product
The Humminbird STH 7W Bronze Thru-Hull Transducer is for large boats, and boats with in-board motors that make most typical transducers ineffective. This bronze thru-hull transducer is not recommended for trailered boats, and Humminbird recommends you have it professionally installed due to the fact that it requires a hole be drilled in the hull and the shaping of a fairing block. The STH 7W is a six-beam transducer with a 53-degree beam angle and an operating frequency of 455 kHz that is intended for 3D sonar applications only. This unit is 4.25 inches in diameter, with a 1.25-inch below-hull depth and a shaft diameter of 0.81 inches. The Humminbird STH 7W comes with a 30-foot connecting cable and all the necessary mounting hardware, but does not include a fairing block. Scheduled for release sometime in April of 2007, the STH 7W is compatible with Humminbird's; Matrix 47 3D, 947C 3D, Wide 3D Vision, Wide 3D Vista, and Wide 3D Paramount sonar systems. This item is backed by Humminbird's one-year limited warranty.

starting at

$146
 

starting at

$51
  • product
HSTWSU mount 20 degree skimmer (200Khz). Includes power cable. For use with X-47, Cuda, FishEasy.

starting at

$51
 

starting at

$40
  • product
Portable Transducer Portable Transducers mount on the transom or side of almost any wood, aluminum, or fiberglass boat. A heavy duty rubber suction cup provides for temporary installation and holds the transducer at trolling motor speeds only. For a completely portable fishfinder, The Portable Case (PTC-W2) accessory contains all parts needed to convert your existing fishfinder to portable operation using your existing transducer. Description: Portable Transducer with Temperature Sensor, Hydrodynamic, single or dual beam (depending on which fish finder it is used with), 24 and 53 degree cone angles, 200/83 kHz. Includes 15 cable, portable mounting hardware. For Use With: Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565, PMAX10, PMAX15, PMAX 20

starting at

$40
 

starting at

$47
  • product
The Humminbird XP 9 20 T Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees, and transmit the sonar signal through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable. The Humminbird XP 9 20 T is a single/dual puck transducer with a built-in temperature sensor, and is designed to be used with Humminbird's; Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, and FF565. This item is backed by Humminbird's one-year limited warranty.

starting at

$47
 

starting at

$37
  • product
Transom Mount Transducer Transom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer. Description: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 16 degree cone angle, high-speed hardware. For Use With: LCR400, LCR400 ID, HDR 200I, HDR 600I, LCR 100I, LCR 100G, OEM-LCR, SR ID-600, ULTIMA, HBL201G, LCR-W, WIDE W, PLATINUM ID 600, TCR ID 10, TFX100ID. Used as a secondary transducer to extend depth range on WIDE 3D PARAMOUNT.

starting at

$37
 

starting at

$37
  • product
Item #: 7101641. Customers also search for: Discount XP 90 20 Single Dual Beam 20/60, Buy XP 90 20 Single Dual Beam 20/60, Wholesale XP 90 20 Single Dual Beam 20/60, 082324505768, 710164-1, Transducers

starting at

$37
 

starting at

$39
  • product
Angled Puck Transducer Inside Hull Transducers mount to the inside of most fiberglass boat hulls and transmit the sonar signal through the hull. On hulls with a deadrise less than 15 degrees, a flat bottom transducer should be used. For angles greater than 15 degrees, an angled transducer is recommended to assure the sonar signal travels downward. Description: Single/Dual Puck Angled Transducer. For Use With: Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.

starting at

$39
 

starting at

$140
  • product
Every Garmin product is designed to meet the most demanding standard: customers' satisfaction. That's why Garmin equipment is manufactured to give you reliable service for years to come, with intuitive features you can grow into over time - all at a price you can afford.PRODUCT FEATURES:Bronze, thru-hull mount transducer with depth;Operating frequency of 200 and 50 kHz;Beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz;Transducer kit comes with installation instructions.

starting at

$140
 

starting at

$70
  • product
Plastic Thru Hull Transducer Plastic Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Plastic Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Bronze Thru-Hull Transducers are an alternative to Plastic Thru-Hull Transducers. Description: Single/Dual Beam, 20/60 Degree, 200/83 kHz transducer. 3.9L X 2.5W X 1.16D. Shaft: 1.0 Diameter For Use With: Matrix 10, 12, 15, 17, 27, 67, 77C, 87C, 97, All 700 Series, All 300 Series, all PiranhaMax (except 240), 917c, 931c, 937c, 957c, 997c, 515, 525, 535, 565, 580, 585c, 595c, HDR610, Piranha 2, Piranha 4, XP2000, XP4000

starting at

$70
You'll find the best prices on Marine electronics transducer in Electronics when you shop online at bizrate. Do all your comparison shopping for Electronics in one place. Compare models and see which online Electronic stores have the best merchant ratings. Make an informed decision on Marine electronics transducer Electronics before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Humminbird XTM-9-20-T Marine Electronics Transducer or Garmin 140 Fish Finder.