sponsored
by

Homesaver Fireplace Accessories

sort by:
add tax & shipping for
 
 
 
store rating:
  • product
HomeSaver Gelled Fire Starter Case of 12-16oz Bottles Gelled Fire starters were first used for pellet appliances. But they caught on so well they are now being used to start fires in woodstoves, fireplaces, coal stoves, even campfires. Stove Bright s...
 

starting at

$27
  • product
thought about these questions a lot.That's why, as a homeowner with a fireplace that is an important feature of that home, you'll be more than pleased to take advantage of Copperfield's full line of fireplace accessories. This Copperfield 4-ft. Log...

starting at

$27
 

starting at

$120
  • product
Cast-iron insert boot for the appropriate size of HomeSaver chimney reliner pipe. PLEASE NOTE* This insert boot requires the use of an insert boot adaptor which is NOT INCLUDED with the purchase of this item. The adaptor must be purchased separately...

starting at

$120
 
store rating:
  • product
HomeSaver Pro Professional Model Stainless Chimney Cap 17" x 17" - The Home-Saver Pro is made of 100% 304 stainless steel, even down to its pointed, slotted, hex-head set-screws. The one piece, 8" high screen is heavy, 18 gauge, 3/4" mesh, and the top...
at
 

starting at

$236
  • product
With a 3-ft. Length Of Large HomeSaver OvalFlex 304-alloy Relining Pipe you generally don't have to tear out damper frames when relining most flues. Just run the OvalFlex liner through the damper, hook up the appropriate adaptors, boots, and hardware...

starting at

$236
 

starting at

$95
  • product
The popular HomeSaver Pro Guardian Chimney Cap attaches to solid-pack round flues or relined flues by sliding inside of either type with a tight friction fit. The HomeSaver Pro Guardian Chimney Cap is available in 3" to 12" diameters. - The 3" and...

starting at

$95
 

starting at

$149
  • product
Wrap is a great insulator at an outstanding value. It consists of special ceramic fibers that resist separation, making it perfect for installations with bends or offsets. When installed, it also helps to center your liner properly in the chimney.The...

starting at

$149
 

starting at

$18
  • product
Use Dura-Vent's PelletVent Pro HomeSaver Flex Liner to Vent Pipe Adaptor to create a complete venting system for your corn or pellet appliance. With this handy venting accessory you can connect PelletVent Pro Vent Pipe to HomeSaver's RoundFlex, Pro,...

starting at

$18
 

starting at

$19
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$19
 

starting at

$19
  • product
The HomeSaver Pro Top Clamp for 3 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for 3 inch...

starting at

$19
 

starting at

$20
  • product
Universal top/bottom support bracket for HomeSaver RectangleFlex, OvalFlex, or RoundFlex chimney liner pipes.

starting at

$20
 

starting at

$21
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$21
 

starting at

$21
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$21
 

starting at

$21
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$21
 

starting at

$21
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$21
 

starting at

$22
  • product
The HomeSaver Pro Top Clamp for 5 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for 5 inch...

starting at

$22
 

starting at

$22
  • product
The HomeSaver Pro Top Clamp for 4 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for 4 inch...

starting at

$22
 

starting at

$22
  • product
HomeSaver UltraPro RoundFlex End cones attach to the appropriately sized HomeSaver UltraPro RoundFlex chimney liner to create a clean, finished terminus to the chimney liner.

starting at

$22
 

starting at

$23
  • product
End Cone for the appropriate size of HomeSaver RoundFlex chimney liner pipe.

starting at

$23
 

starting at

$23
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$23
 

starting at

$23
  • product
HomeSaver UltraPro RoundFlex End cones attach to the appropriately sized HomeSaver UltraPro RoundFlex chimney liner to create a clean, finished terminus to the chimney liner.

starting at

$23
 

starting at

$24
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 6 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$24
 

starting at

$24
  • product
End Cone for the appropriate size of HomeSaver RoundFlex chimney liner pipe.

starting at

$24
 

starting at

$24
  • product
The HomeSaver Pro Top Clamp for 5.5-or 6 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for...

starting at

$24
 

starting at

$24
  • product
The HomeSaver Pro Top Clamp for 7 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for 7 inch...

starting at

$24
 

starting at

$25
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 8 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$25
 

starting at

$25
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$25
 

starting at

$25
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$25
 

starting at

$26
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 4 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$26
 

starting at

$26
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 3 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$26
 

starting at

$26
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 5 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$26
 

starting at

$26
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$26
 

starting at

$27
  • product
Tee cover for the corresponding size of HomeSaver RoundFlex tee section.

starting at

$27
 

starting at

$27
  • product
End Cone for the appropriate size of HomeSaver RoundFlex chimney liner pipe.

starting at

$27
 

starting at

$27
  • product
The HomeSaver Pro Top Clamp for 8 inch Chimney Liner is designed for use with a top plate, storm collar, and cap to provide a protected, reliable top termination for your HomeSaver Pro chimney reliner plate. The HomeSaver Pro Top Clamp for 8 inch...

starting at

$27
 

starting at

$28
  • product
You will need this HomeSaver RoundFlex Connector-Adaptor for 7 inch Chimney Liner for the necessary 'male-end-down' joint in your chimney liner installation of RoundFlex. It is for use when mating RoundFlex on top to rigid pipe below, RoundFlex to...

starting at

$28
 

starting at

$28
  • product
This is an adaptor for connecting one piece of HomeSaver OvalFlex chimney liner pipe to another.

starting at

$28
 

starting at

$29
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$29
 

starting at

$30
  • product
A HomeSaver Top Clamp is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top/bottom plate to create a secure top termination. The top clamp is manufactured from...

starting at

$30
 

starting at

$31
  • product
End Cone for the appropriate size of HomeSaver RoundFlex chimney liner pipe.

starting at

$31
 

starting at

$31
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$31
 

starting at

$32
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$32
 

starting at

$33
  • product
HomeSaver UltraPro RoundFlex End cones attach to the appropriately sized HomeSaver UltraPro RoundFlex chimney liner to create a clean, finished terminus to the chimney liner.

starting at

$33
 

starting at

$34
  • product
Crimped 5-in. long take off for use with a HomeSaver UltraPro tee with a 6-in. take-off.

starting at

$34
 

starting at

$34
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$34
 

starting at

$34
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$34
 

starting at

$35
  • product
Top/bottom plate for use with the appropriately sized HomeSaver RectangleFlex chimney liner pipe.

starting at

$35
 

starting at

$36
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$36
 

starting at

$37
  • product
The HomeSaver UltraPro 18 x 18 CollarPlate w/ Band Connection for 5 inch Chimney Liner supports the entire HomeSaver UltraPro installation. It is a top plate, a storm collar, and a top clamp all in one.The collar plate's built-in clamp tightens with a...

starting at

$37
 

starting at

$39
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$39
 

starting at

$39
  • product
ArmorMesh is required as part of a HomeSaver UL listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe for years to come. ArmorMesh also makes FlexWrap highly resistant to snagging or tearing...

starting at

$39
 

starting at

$40
  • product
The HomeSaver UltraPro 13 x 13 CollarPlate w/ Band Connection for 5.5 inch Chimney Liner supports the entire HomeSaver UltraPro installation. It is a top plate, a storm collar, and a top clamp all in one.The collar plate's built-in clamp tightens with...

starting at

$40
 

starting at

$40
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$40
 

starting at

$40
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$40
 

starting at

$40
  • product
This connector-adaptor is for use with the appropriate size of HomeSaver Pro chimney reliner pipe. This particular connector-adaptor relies on the use of pop rivets to secure it to the liner. The end result is a secure, reliable connection that will...

starting at

$40
 

starting at

$41
  • product
Top/bottom plate for use with the appropriately sized HomeSaver OvalFlex chimney liner pipe.

starting at

$41
 

starting at

$41
  • product
Top/bottom plate for use with the appropriately sized HomeSaver OvalFlex chimney liner pipe.

starting at

$41
 

starting at

$41
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$41
 

starting at

$42
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$42
 

starting at

$42
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$42
 

starting at

$43
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$43
 

starting at

$43
  • product
This adaptor safely and easily connects your HomeSaver RectangleFlex chimney liner pipe to another type of pipe.

starting at

$43
 

starting at

$43
  • product
This is a rain cap for the appropriate size of HomeSaver chimney liner pipe. The rain cap protects the chimney from water or precipitation going down in the chimney. The rain cap requires a top plate sealed to the crown or flue tile, a top clamp, a...

starting at

$43
 

starting at

$43
  • product
This is a rain cap for the appropriate size of HomeSaver chimney liner pipe. The rain cap protects the chimney from water or precipitation going down in the chimney. The rain cap requires a top plate sealed to the crown or flue tile, a top clamp, a...

starting at

$43
 

starting at

$44
  • product
Tee cover for the appropriately sized take-off on a HomeSaver UltraPro Tee.

starting at

$44
 

starting at

$45
  • product
A HomeSaver Top/Bottom Plate is used with the appropriately sized HomeSaver Pro RoundFlex chimney liner pipe in conjunction with a guardian cap, a storm collar, and a top clamp to create a secure top termination. The top/bottom plate is manufactured...

starting at

$45
 

starting at

$45
  • product
This connector-adaptor is for use with the appropriate size of HomeSaver Pro chimney reliner pipe. This particular connector-adaptor relies on the use of pop rivets to secure it to the liner. The end result is a secure, reliable connection that will...

starting at

$45
 

starting at

$47
  • product
Tee section for use with 3-in. HomeSaver RoundFlex chimney liner pipe. This tee section has a fixed take-off.

starting at

$47
 

starting at

$47
  • product
Safety is the most important concern when installing a stove or any other heating appliance. With a HomeSaver Single-Wall Stovepipe Shield you can reduce the required clearance of any stovepipe to just six inches. And that gives you the flexibility to...

starting at

$47
 

starting at

$48
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$48
 

starting at

$49
  • product
The Home Saver Pro Storm Collar is part of one of the two available top termination configurations available for HomeSaver Pro chimney liners. In this case the storm collar is used with a top plate, top clamp, and cap to create a secure, protected...

starting at

$49
 

starting at

$49
  • product
This connector-adaptor is for use with the appropriate size of HomeSaver Pro chimney reliner pipe. This particular connector-adaptor relies on the use of pop rivets to secure it to the liner. The end result is a secure, reliable connection that will...

starting at

$49
 

starting at

$50
  • product
This is an adaptor for connecting one piece of HomeSaver OvalFlex chimney liner pipe to another.

starting at

$50
 

starting at

$51
  • product
This connector-adaptor is for use with the appropriate size of HomeSaver Pro chimney reliner pipe. This particular connector-adaptor relies on the use of pop rivets to secure it to the liner. The end result is a secure, reliable connection that will...

starting at

$51
 

starting at

$51
  • product
This connector-adaptor is for use with the same size of HomeSaver UltraPro chimney reliner pipe. The connection does not rely on pop rivets or screws, but rather has a band connector clamp attached to both ends of the connector-adaptor to eliminate the...

starting at

$51
 

starting at

$52
  • product
This is a rain cap for the appropriate size of HomeSaver chimney liner pipe. The rain cap protects the chimney from water or precipitation going down in the chimney. The rain cap requires a top plate sealed to the crown or flue tile, a top clamp, a...

starting at

$52
 

starting at

$52
  • product
This connector-adaptor is for use with the same size of HomeSaver UltraPro chimney reliner pipe. The connection does not rely on pop rivets or screws, but rather has a band connector clamp attached to the female end of the connector-adaptor to...

starting at

$52
 

starting at

$52
  • product
This connector-adaptor is for use with the same size of HomeSaver UltraPro chimney reliner pipe. The connection does not rely on pop rivets or screws, but rather has a band connector clamp attached to both ends of the connector-adaptor to eliminate the...

starting at

$52
 

starting at

$53
  • product
This connector-adaptor is for use with the appropriate size of HomeSaver Pro chimney reliner pipe. This particular connector-adaptor relies on the use of pop rivets to secure it to the liner. The end result is a secure, reliable connection that will...

starting at

$53
Best prices on Homesaver in Fireplace Accessories. Check out BizRate for great deals on Fireplace Accessories from HomeSaver and Copperfield. Use BizRate's latest online shopping features to compare prices for Homesaver. Read product specifications, calculate tax and shipping charges, sort your results, and buy Home & Garden with confidence. Easily narrow your search and find the product that's perfect for you: HomeSaver 81716 N/A HomeSaver Gelled Fire Starter Case of 12-16oz Bottles - HomeSaver Pro/UltraPro Insert Boot Adaptor for 7 inch Chimney Liner.