Stainless steel fishing rod holders Fishing Gear

you're in Fishing Gear, see other matches in:

Advertisement
Advertisement
sort by:
add tax & shipping for
 
 
 
  $59.99

 

  • product
  • coupons
An adjustable stainless steel clampon rod holder to fit nearly any pipe or tube on Ttops, leaning posts, poling platforms and grab rails. Available: 7/8''1'' tube, 3/4''1'' IPS pipe, 11/4'' IPS pipe, Color: Silver.

$20 off orders $100 or more thru 12/8

Expiration:  12/07/09

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless...

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Fully adjustable. Features multi-swivel base that can be permanently mounted. Sockets can be removed, leaving only the flush mount base plate. Rotates 360 degrees. Stainless Steel Construction. 11" x 1.9" dia.

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

See more...

  • priceRangeSubmit yes

 

Flush Mount Rod Holder

see more like this

store rating:
  • product
Works great in kayaks or any flush mount application for just about any boat. Installs easily with a drill, small saw, rivets and rivet gun. Can also be mounted with stainless steel screws (hardware not included).

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Increase your odds with easier access to your rod and reel. The Scotty Rod Holder Extender 254 extends the height of a rod holder by 8 1/2". Stainless steel shaft. Works with all Scotty post mount rod holders.

See more...

  • priceRangeSubmit yes

 

Craig Single Rod Holders

see more like this

store rating:
  • product
Craig Single Rod Holders are the ultimate in heavy duty durability matched with ease of use. These rod holders feature machined 6061 t6 aluminum construction with stainless steel hardware. All aluminum parts are fully anodized for protection from the...

See more...

  • priceRangeSubmit yes

 
  $104.99

 

  • product
  • coupons
Constructed of strong investmentcast 316 stainless steel for maximum corrosion resistance and long life. White vinyl liner and integrallycast gimbal pin. Clamp insulator protects anodized finish of rails. Standard mounting clamp rotates for either...

$20 off orders $100 or more thru 12/8

Expiration:  12/07/09

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Craig Pedestal Mount Rod Holders are the ultimate in heavy duty durability matched with ease of use. These rod holders feature machined 6061 t6 aluminum construction with stainless steel hardware. All aluminum parts are fully anodized for protection...

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Super-strong, solid glass blanks feature nothing but heavy-duty components. Blank-thru-handle design with EVA foam grips takes the abuse of rod holders and heavy hits. Graphite reel seats with stainless steel hoods resist saltwater corrosion and make a so

See more...

  • priceRangeSubmit yes

 
  • product
Constructed from strong 316 stainless steel, this flush-mount rod holder features a wide low-profile flange for a great looking finish. 1 5/8" inner dia. white vinyl liner protects your rod and is keyed to a 1/2" thick gimbal bar so the liner stays...

See more...

  • priceRangeSubmit yes

 
  • product
Made of 316 stainless steel, this rod holder rotates a full 360° horizontally and 180° vertically for outstanding versatility. Unique design allows the rod holder to be top or side-mounted on either port or starboard side. The 3-5/8" x 2" base fits...

See more...

  • priceRangeSubmit yes

 
  $49.99

 

  • product
  • coupons
Holds your push pole 11/16" off the deck. Made of cast 316 stainless steel to resist corrosion and UVresistant glassfilled nylon construction. It folds down flush when not in use. Use three Push Pole holders per pole with middle holder installed in...

$20 off orders $100 or more thru 12/8

Expiration:  12/07/09

See more...

  • priceRangeSubmit yes

 
  $59.99

 

  • product
  • coupons
An adjustable stainless steel clampon rod holder to fit nearly any pipe or tube on Ttops, leaning posts, poling platforms and grab rails. Available: 7/8''1'' tube, 3/4''1'' IPS pipe, 11/4'' IPS pipe, Color: Silver.

$20 off orders $100 or more thru 12/8

Expiration:  12/07/09

See more...

  • priceRangeSubmit yes

 
  • product
ADJUSTABLE CLAMP MID-MOUNTStainless Steel Rod HoldersFINISH:SilverMOUNTAdj. MidFITS STAINLESS TUBE SIZE*1-1/4" actual OD tube using included sleeve 53660S2)FITS ALUMINUM PIPE SIZE**3/4" schedule 40 pipeClamp angle adjusts in 10° incrementsHidden...

See more...

  • priceRangeSubmit yes

 
  $99.99

 

  • product
  • coupons
100 investmentcast 316 stainless steel construction stands up to harsh saltwater conditions. White vinyl liner and integrallycast gimbal pin. Clamp insulator protects anodized finish of rails. Standard mounting clamp rotates for either vertical or...

$20 off orders $100 or more thru 12/8

Expiration:  12/07/09

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Super-strong, solid glass blanks feature nothing but heavy-duty components. Blank-thru-handle design with EVA foam grips takes the abuse of rod holders and heavy hits. Graphite reel seats with stainless steel hoods resist saltwater corrosion and make a so

See more...

  • priceRangeSubmit yes

 

Clamp-On Rod and Net Holder

see more like this

store rating:
  • product
Fully adjustable, stanchion/rail mount clamp made of chrome-plated bronze. Features: * Polished 304 stainless steel tube with full PVC insert to protect rod butts * Fits 7/8" to 1" rails * 1.9" dia.x9" * Stainless steel fasteners included. \

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Super-strong, solid glass blanks feature nothing but heavy-duty components. Blank-thru-handle design with EVA foam grips takes the abuse of rod holders and heavy hits. Graphite reel seats with stainless steel hoods resist saltwater corrosion and make a so

See more...

  • priceRangeSubmit yes

 
store rating:
  • product
Super-strong, solid glass blanks feature nothing but heavy-duty components. Blank-thru-handle design with EVA foam grips takes the abuse of rod holders and heavy hits. Graphite reel seats with stainless steel hoods resist saltwater corrosion and make a so

See more...

  • priceRangeSubmit yes

Best prices on Stainless steel fishing rod holders in Fishing Gear. Check out BizRate for great deals on Fishing Gear from C.E. Smith, Scotty and Tigress. Use BizRate's latest online shopping features to compare prices for Stainless steel fishing rod holders. Read product specifications, calculate tax and shipping charges, sort your results, and buy Sports Equipment & Outdoor Gear with confidence. Easily narrow your search and find the product that's perfect for you: TACO Sport Fishing Stainless Steel Adjustable ClampOn Rod Holder (3/4"1"adj ss rd hld) - C.E. Smith Company Flush Mount Rod Holder, 0 Degree.