Best Seller
Allied Tools 49028 107-Piece Automotive Tool Set

Allied Tools 49028 107-Piece Automotive Tool Set

The Allied International 49028 107-Piece Automotive Tool Set provides a full set of tools for work on your car. Parts include a variety of wrenches, bit driver, cushion grip pliers, 3/8-inch and 1/4-inch standard sockets, and a 3/8-inch full polish... more

$33.26

go to store
Cal-Van Tools 183 Nut Splitter

Cal-Van Tools 183 Nut Splitter

Cal-Van Tools Nut Splitter is a real time saver when removing rusted or corroded nuts. This compact tool will split nuts up to 1/2 feet automotive series or any nut 7/8 inch across flat. There is no air or power needed. A few turns with a 3/4 inch hand... more

$25.83

go to store
Best Seller
DEWALT 20V MAX Lithium-Ion Cordless Impact Driver - 1/4 Inch Hex, 117 Ft.-Lbs. Torque, Tool Only, Model DCF885B

DEWALT 20V MAX Lithium-Ion Cordless Impact Driver - 1/4 Inch Hex, 117 Ft.-Lbs. Torque, Tool Only, Model DCF885B

This cordless impact driver is compact enough to fit into small spaces and features 3 LED lights with a 20-second delay after trigger release, so you have good visibility in low light. 1/4in. hex chuck loads conveniently with one hand and accepts 1in.... more

$119.00

FREE shipping

go to store
Ironton Tool Bag Set - 70-Piece, 1/4 Inch and 3/8 Inch Drive

Ironton Tool Bag Set - 70-Piece, 1/4 Inch and 3/8 Inch Drive

Handy Ironton 70-pc. tool set fits into storage bag. Carbon steel construction. Set includes 3/8in.-drive ratchet handle, extension bar, adapter, 19 3/8in.-drive sockets, 20 1/4in.-drive sockets, 6 screwdrivers and 16-pc. hex key set. Also comes with... more

$59.99 $34.99

go to store
Advanced Tool Design Model ATD-1351 5 Piece Adapter Set

Advanced Tool Design Model ATD-1351 5 Piece Adapter Set

Contains: 1/4"F x 3/8"M, 3/8"F x 1/4"M, 1/2"F x 3/8"M, 3/8"F x 1/2"M, and 1/2"F x 3/4"M adapters. more

$19.67

go to store
DEWALT DCK492L2 20V MAX Cordless Lithium-Ion Premium 4-Tool Combo Kit

DEWALT DCK492L2 20V MAX Cordless Lithium-Ion Premium 4-Tool Combo Kit

20V MAX Lithium-Ion Hammer Drill - DCD985. 20V MAX Lithium-Ion Reciprocating Saw - DCS380. 20V MAX Lithium-Ion 1/4-in Impact Driver - DCF885. 20V MAX Lithium-Ion LED Work Light - DCL040. (2) 20V MAX Lithium-Ion Battery Packs. Charger. Carrying Case more

$519

compare prices
Amana Tool 55400 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower

Amana Tool 55400 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower

Amana Tool 55400 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower BB Router Bit Assembly for 1/2 to 3/4 Material Sold by Toolstoday more

$68.40

FREE shipping

go to store

Toolstoday

(5,000+)
Amana Tool SCS-1106 Multi-Piece Profile Pro 68mm D x 40mm CH x 3/4 to 1/2 Bore Shaper Cutter Starter

Amana Tool SCS-1106 Multi-Piece Profile Pro 68mm D x 40mm CH x 3/4 to 1/2 Bore Shaper Cutter Starter

Amana Tool SCS-1106 Multi-Piece Profile Pro 68mm D x 40mm CH x 3/4 to 1/2 Bore Shaper Cutter Starter Set Sold by Toolstoday more

$196.46

FREE shipping

go to store

Toolstoday

(5,000+)
Amana Tool 55407 2-PC Carbide Tipped Tongue & Groove 1/2 Kerf x 1-7/8 D x 3/4 CH x 1/2 Inch SHK w/ L

Amana Tool 55407 2-PC Carbide Tipped Tongue & Groove 1/2 Kerf x 1-7/8 D x 3/4 CH x 1/2 Inch SHK w/ L

Amana Tool 55407 2-PC Carbide Tipped Tongue & Groove 1/2 Kerf x 1-7/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower BB Router Bit Set for 1/2 - 3/4 Material Sold by Toolstoday more

$122.55

FREE shipping

go to store

Toolstoday

(5,000+)
Sunex Tools 3/4-In Drive 6-In Socket Extension Sun4302

Sunex Tools 3/4-In Drive 6-In Socket Extension Sun4302

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability. Radius corner design - to extend the life of fasteners. Standard drive extension impact socket. Impact socket extension with pin hole. Limited lifetime... more

$26.30

FREE shipping

go to store

Lowe's

(25,000+)
Performance Tool Master Bit Set 148 Piece

Performance Tool Master Bit Set 148 Piece

Just add drill. This 148-Pc. Bit Set has the answer to just about any DIY situation - and for a darn-near unbeatable price! Phillips, slotted, square drive Torx Pozi drive Inch and metric hex Clutch drive Spine drive Spanner 3 and 4-wing drives... more

$29.99

go to store
Brownells Barrel Chamfering Accessories - Facing & Chamfering Tool Handle, 1/4"-20 Thread

Brownells Barrel Chamfering Accessories - Facing & Chamfering Tool Handle, 1/4"-20 Thread

A very handy tool to take along to the range or keep in your tool box, "just in case". Mfg: Brownells SPECS: Handle - aluminum 3�" (8.8cm) long. more

$14.99

go to store
Performance Tool 32-Pc. Performance Tools SAE & Metric Wrench Set

Performance Tool 32-Pc. Performance Tools SAE & Metric Wrench Set

32-Pc. Performance Tool SAE & Metric Wrench Set. In standard / stubby length. Mirror-polished chrome vanadium steel. Improved box end design for more torque. Includes: SAE: 1/4, 5/16, 11/32, 3/8, 7/16. 1/2, 9/16, 5/8 and 3/4 Stubby SAE: 5/16, 3/8,... more

$24.99

go to store
Gunline Barrel Bedding Tool - 3/4" Bedding Tool

Gunline Barrel Bedding Tool - 3/4" Bedding Tool

Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without "digging... more

$29.99

go to store
Grs System 3 Air Engraver - System 3 Air Engraver Kit

Grs System 3 Air Engraver - System 3 Air Engraver Kit

Get professional results quickly. Comfortable handpiece with quick-change tool holders lets you do carving, fine line engraving and metal removal. Powered by your compressor. Mfg: Grs SPECS: Handpiece; 4�" (11cm) long. Requires 1.0 CFM at 50 psi, 120... more

$499.99

go to store
Panacea 4-Piece Fireplace Tool Set - 15041

Panacea 4-Piece Fireplace Tool Set - 15041

Get Free Shipping on this Item

Panacea Products 15041 Fireplace Tool Set This fireplace tool set is made to maintain your fireplace in style. The set of three tools from the Open Hearth Collection provides for all your fire tending needs; ideal for compact spaces! Clean Up with... more

$36.00

FREE shipping

go to store
Performance Tool Impact Socket Adapter Set 8 Piece

Performance Tool Impact Socket Adapter Set 8 Piece

Socket Adapters to use with air tools, power tools or drive tools, converting to and from any drive size: 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch. Created from strong and durable vanadium and molybdenum steel, these tools come in their own... more

$29.99

go to store
Rubbermaid Commercial Products Flat Shelf Utility Carts - 44.1''W X 26''D X 10.3''H, RCP452500BK

Rubbermaid Commercial Products Flat Shelf Utility Carts - 44.1''W X 26''D X 10.3''H, RCP452500BK

Flat shelf utility cart features heavy-duty structural foam construction that resists rust and corrosion.Weight capacity is 500 lb with a 250 lb capacity for each shelf.Use the handle bin for storing small parts and tools.Utility cart rolls on four 5''... more

$516.99 $395.99

go to store
ASP 7029 Grey Hand Tools ASP 7029 3/4" Pipe Slice Tube Cutter

ASP 7029 Grey Hand Tools ASP 7029 3/4" Pipe Slice Tube Cutter

ASP 7029 3/4" Pipe Slice Tube Cutter more

$29.20

go to store
Channellock ; 6 Pc Screwdriver Set Air, Hand, & Power Tools

Channellock ; 6 Pc Screwdriver Set Air, Hand, & Power Tools

supply Your Garage With This Useful 6 Piece Screwdriver Set. Comprised Of Phillips Screwdrivers Measuring P103a #1 X 3 In., P204a #2 X 4 In. And P206a #2 X 6 In. And Slotted Screwdrivers Measuring S363a 3/16 In. X 3 In., S144a 1/4 In. X 4 In. And S146a... more

$35.99

go to store
Powerzone 380044 3 Ton Aluminum and Steel Garage Jack

Powerzone 380044 3 Ton Aluminum and Steel Garage Jack

The Powerzone Heavy Duty Steel and Aluminum Garage Jack lifts from 4 inch to 18-1/4 inch and supports 3 tons. The jack has a lightweight aluminum frame and heavy duty steel lift arm for strength and durability. The quick lifting hydraulic system saves... more

$229.95

FREE shipping

go to store
Performance Tool W80670 7-Piece Double Flare Tool Set

Performance Tool W80670 7-Piece Double Flare Tool Set

7-piece kit includes flaring bar, yoke, and 5 double flare dies for tubing sizes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch in outer diameter. Easy to use lever lock flaring bar. Floating cone for accurate alignment. Detailed instructions.... more

$22.47

go to store
Klutch SAE and Metric Mechanic's Tool Set - 189-Piece, 1/4 Inch, 3/8 Inch & 1/2 Inch Drive

Klutch SAE and Metric Mechanic's Tool Set - 189-Piece, 1/4 Inch, 3/8 Inch & 1/2 Inch Drive

Complete professional grade Klutch 189-pc. automotive repair set features chrome vanadium steel 1/4in.-, 3/8in.- and 1/2in.-drive 6-, 8- and 12-pt. sockets, quick-release ratchets, bit sets, drive tools and more. Klutch hand tools are built to provide... more

$149.99

go to store
Sykes-Pickavant 02725600 Hand Held Automotive Brake Pipe Flaring Tool (Flaremaster2 for 4.75mm, 3/16in & 6mm Brake Pipes)

Sykes-Pickavant 02725600 Hand Held Automotive Brake Pipe Flaring Tool (Flaremaster2 for 4.75mm, 3/16in & 6mm Brake Pipes)

Features: Quick-release chuck for positive engagement of the punch and fast-turn coarse thread on hydraulic ram, for quick assembly; lkocking bolt with swivel pin, for fast tightening. Inter-changeable dies, held in place by magnets and enhanced bridge... more

$270.07

FREE shipping

go to store
Milwaukee M12 Cordless Electric 1/4 Inch Ratchet Wrench - Tool Only, 12 Volt, Model 2456-20

Milwaukee M12 Cordless Electric 1/4 Inch Ratchet Wrench - Tool Only, 12 Volt, Model 2456-20

The Milwaukee M12 Cordless 1/4in. Lithium-Ion Ratchet is the most compact and powerful ratchet in its class. At only 10 3/4in. long and 1.9 lbs., this lightweight tool is the ideal fastening solution for automotive mechanics and maintenance & repair... more

$109.00

FREE shipping

go to store
California Air Tools Ultra-Quiet Twin Stack Portable Electric Air Compressor - 2 HP, 4.6-Gallon, 5.3 CFM, Model CAT-4620AC

California Air Tools Ultra-Quiet Twin Stack Portable Electric Air Compressor - 2 HP, 4.6-Gallon, 5.3 CFM, Model CAT-4620AC

The California Air Tools Model# CAT-4620AC 2 HP Ultra-Quiet, Oil-Free Air Compressor is engineered to be one of the quietest air compressors in the industry, producing only 70 decibels of sound. The powerful 2 HP 110V motor operates at only 1,680 RPM,... more

$299.99

go to store
SK 4130 30 Piece 1/2-Inch Drive 12 Point 3/8-Inch to 1-1/4-Inch Standard Socket Set

SK 4130 30 Piece 1/2-Inch Drive 12 Point 3/8-Inch to 1-1/4-Inch Standard Socket Set

30 piece set is made in the U.S.A., featuring SK's high polish SuperKrome® finish Provides long life and maximum corrosion resistance All sockets feature SK's SureGrip® hex design, which drives the side of the fastener to avoid edge breakage, which can... more

$774.74

FREE shipping

go to store
SuperCut Carbon Tool Steel Replacement Band Saw Blade - 93 Inch L x 3/4 Inch W x 0.032 Inch, 10 Raker Teeth Per Inch

SuperCut Carbon Tool Steel Replacement Band Saw Blade - 93 Inch L x 3/4 Inch W x 0.032 Inch, 10 Raker Teeth Per Inch

This SuperCut Carbon Tool Steel Bandsaw Blade is made from the toughest alloys, with a high silicon content. This blade features precision milled, heat-treated teeth and a flexible back. This blade is recommended for cutting non-ferrous metals, and... more

$19.99 $14.99

FREE shipping

go to store
S&G Tool Aid (98500) Pneumatic Oil Supplier Tool

S&G Tool Aid (98500) Pneumatic Oil Supplier Tool

Automatically lubricates air tools as they are being used High quality aircraft aluminum stem, precisely machined to 1/4" NPT Oil reservoir is fabricated of high impact plastic Technician always sees oil supply and oiling action Holds three to four... more

$21.28

go to store
Stronghand Tools MagTab Magnet Tool - 18lb. Max. Pull Force, 4 Inch, Model MFT10

Stronghand Tools MagTab Magnet Tool - 18lb. Max. Pull Force, 4 Inch, Model MFT10

The Stronghand Tools MagTab Magnet Tool is the better, faster way to hold tabs in place for tack welding. Hold tabs, or any small metal pieces, parallel or perpendicular to your substructure. Adjustable Yes, Dimensions L x W x H in. 4 x 3 x 1 1/4,... more

$17.99

go to store
Amana Tool SC642 2-PC Carbide Tipped 3-Wing V Paneling 2-3/4 D x 1 CH x 45 Deg x 1/2 & 3/4 Bore Shap

Amana Tool SC642 2-PC Carbide Tipped 3-Wing V Paneling 2-3/4 D x 1 CH x 45 Deg x 1/2 & 3/4 Bore Shap

Amana Tool SC642 2-PC Carbide Tipped 3-Wing V Paneling 2-3/4 D x 1 CH x 45 Deg x 1/2 & 3/4 Bore Shaper Cutter Set for 1 Inch Material Sold by Toolstoday more

$116.45

FREE shipping

go to store

Toolstoday

(5,000+)
Klutch Jumbo Mechanic's Tool Set - 82-Piece, 3/4 Inch Drive

Klutch Jumbo Mechanic's Tool Set - 82-Piece, 3/4 Inch Drive

The Klutch 82-Pc. Jumbo Mechanic's Tool Set features jumbo 3/4'-drive sockets and jumbo wrenches for extra leverage. Chrome vanadium sockets have polished chrome finish and hi-vis markings for easy reading. Surface Drive sockets and combination wrench... more

$699.99 $349.00

go to store
Wiss WS4 3-Inch Offset Handle - HVAC Hand Seamer

Wiss WS4 3-Inch Offset Handle - HVAC Hand Seamer

Shipping Cu. Ft.:-1/4 - 1-1/4-Inch Jaw Width (In.): 3-1/4-Inch Length (Inches) (In.): 9-Inch. more

$40.92

FREE shipping

go to store
Welder's Magnetic Block Link Clamp - 4 3/4 Inch x 2 1/4 Inch x 1 1/4 Inch, Northern Industrial

Welder's Magnetic Block Link Clamp - 4 3/4 Inch x 2 1/4 Inch x 1 1/4 Inch, Northern Industrial

The Northern Industrial Welder's Magnetic Block Link Clamp is designed to position materials for welding, soldering and other metal working projects. Adjustable Yes, Dimensions L x W x H in. 2 x 1 x 1, Product Type Clamp. Consists of two heavy-duty... more

$17.99

go to store
Amana Tool 905 Carbide Tipped 3-Wing Corner Round 1/4 R 2-5/8 D x 15/16 CH x 1/2 & 3/4 Bore Shaper C

Amana Tool 905 Carbide Tipped 3-Wing Corner Round 1/4 R 2-5/8 D x 15/16 CH x 1/2 & 3/4 Bore Shaper C

Amana Tool 905 Carbide Tipped 3-Wing Corner Round 1/4 R 2-5/8 D x 15/16 CH x 1/2 & 3/4 Bore Shaper Cutter Sold by Toolstoday more

$76.37

FREE shipping

go to store

Toolstoday

(5,000+)
Amana Tool 45455 CNC Carbide Tipped Straight Plunge High Production 3/4 D x 2 Inch CH x 3/4 SHK R/H

Amana Tool 45455 CNC Carbide Tipped Straight Plunge High Production 3/4 D x 2 Inch CH x 3/4 SHK R/H

Amana Tool 45455 CNC Carbide Tipped Straight Plunge High Production 3/4 D x 2 Inch CH x 3/4 SHK R/H Router Bit Sold by Toolstoday more

$41.14

FREE shipping

go to store

Toolstoday

(5,000+)
OEMTOOLS 25535 Pinion Locknut Socket (2-3/4" X 6Pt)

OEMTOOLS 25535 Pinion Locknut Socket (2-3/4" X 6Pt)

OEM Automotive Specialty Tools are designed to perform day after day in any environment. Our engineers design tools that maximize both performance and budget. OEM tools out-perform the competition time after time. more

$37.26

FREE shipping

go to store
OEMTOOLS 25233 5-1/4 Inch to 5-3/4 Inch Heavy Duty Truck Oil Filter Wrench

OEMTOOLS 25233 5-1/4 Inch to 5-3/4 Inch Heavy Duty Truck Oil Filter Wrench

OEM automotive specialty tools are designed to perform day after day in any environment. Our engineers design tools that maximize both performance and budget. OEM tools out-perform the competition time after time. more

$20.75

go to store
50:1 Grease Pump - 115 PSI, Port, Northern Industrial Tools

50:1 Grease Pump - 115 PSI, Port, Northern Industrial Tools

High-pressure grease dispenser for dispensing all types of grease both short and long distances. Compatible with integrated lubrication system. Noncorrosive design for durability. Air Inlet Size in. NPT 1/4, Average Air Consumption CFM 4.3, Operating... more

$169.99 $119.99

go to store
Amana Tool A-28-106 Carbide Tipped 3-Wing Heavy-Duty Flute (Convex) 3/8 R x 4 D x 3/4 CH x 1-1/4 Bor

Amana Tool A-28-106 Carbide Tipped 3-Wing Heavy-Duty Flute (Convex) 3/8 R x 4 D x 3/4 CH x 1-1/4 Bor

Amana Tool A-28-106 Carbide Tipped 3-Wing Heavy-Duty Flute (Convex) 3/8 R x 4 D x 3/4 CH x 1-1/4 Bore Shaper Cutter Sold by Toolstoday more

$66.36

FREE shipping

go to store

Toolstoday

(5,000+)