Best Seller
Strongway Garden Cart - 400-lb. Capacity, 14 Cu. Ft., 48 Inch L x 29 Inch W

Strongway Garden Cart - 400-lb. Capacity, 14 Cu. Ft., 48 Inch L x 29 Inch W

Free Gift Card w/ Order

Strongway Garden Cart has 400-lb. working load capacity. Two 26in. spoked pneumatic wheels with ball bearing hubs for smooth movement. Rigid steel frame with rust-resistant powder-coat finish. Sturdy plywood panels with attractive aluminum edging.... more

$129.99

go to store
Vestil Aluminum Sheet Deck Platform Truck - 3,600-Lb. Capacity, 72 Inch L x 36 Inch W, Model ASD-3672

Vestil Aluminum Sheet Deck Platform Truck - 3,600-Lb. Capacity, 72 Inch L x 36 Inch W, Model ASD-3672

Free Gift Card w/ Order

Tough but lightweight, this truck is made of smooth aluminum for durability. Ideal for commercial, industrial, and warehouse areas. U.S.A. Image shown representational only handle design may vary. Wheel Size in. 5 x 2, Caster Type Rigid/swivel, Load... more

$534.99 $499.99

go to store
Best Seller
JET Horizontal Wet Band Saw - 5 Inch x 8 Inch, 1/2 HP, 115V, Model J-3230

JET Horizontal Wet Band Saw - 5 Inch x 8 Inch, 1/2 HP, 115V, Model J-3230

Free Gift Card w/ Order

The 5 x 8 JET Horizontal Wet Band Saw is equipped with a handle and wheels to allow easy movement to various workstations. Sturdy band saw is built to last with heavy-duty rigid steel and cast iron construction. HP 1/2, Speed RPM 1,725, Cordless No,... more

$929.00

FREE shipping

go to store
Bon 12-700 10-Feet by 4-Inch Straight Steel Concrete Form

Bon 12-700 10-Feet by 4-Inch Straight Steel Concrete Form

Heavy steel angles at each end and in between the pockets insure rigid support for the 2-inch top and bottom rails and prevent form damage. All welded form fabrication provides maximum strength and rigidity - completely reinforces the forms to insure... more

$179.00

FREE shipping

go to store
SK Hand Tool 1933 12 Point Drive Metric Set Socket, 1/2-Inch, 33-Piece

SK Hand Tool 1933 12 Point Drive Metric Set Socket, 1/2-Inch, 33-Piece

Sockets are manufactured to rigid specification in a variety of sizes and styles to ensure you always have the right tool for each application. more

$770.04

FREE shipping

go to store
SK Hand Tool 45574 Torx Plus T60 Drive Bit Socket, 1/2-Inch, Chrome

SK Hand Tool 45574 Torx Plus T60 Drive Bit Socket, 1/2-Inch, Chrome

SK Chrome Sockets are manufactured to rigid specification in a variety of sizes and styles to ensure you always have the right tool for each application. more

$26.95

go to store
Rigid Rule, 12, Mitutoyo, 182-125

Rigid Rule, 12, Mitutoyo, 182-125

Inch/Metric Rigid Steel Rule, Length 300 Millimeters, Graduations Quick Reading 32nds and 64ths, 1 and 1/2 Millimeter, Width x Thickness 1 x 3/64 Millimeters more

$31.05

go to store
MITUTOYO 182-105 Steel Rule,Rigid,6In,32/64ths/0.5/1mm

MITUTOYO 182-105 Steel Rule,Rigid,6In,32/64ths/0.5/1mm

Inch/Metric Rigid Steel Rule, Length 150 Millimeters, Graduations Quick Reading 32nds and 64ths, 1 and 1/2 Millimeter, Width x Thickness 3/4 x 3/64 Millimeters more

$12.80

go to store
Stabila 37816 Heavy Duty 48-Inch & 16-Inch Type 196 Aluminum (Silver) Box Beam Level Set (48 In x 16 In Aluminum Box Beam Set)

Stabila 37816 Heavy Duty 48-Inch & 16-Inch Type 196 Aluminum (Silver) Box Beam Level Set (48 In x 16 In Aluminum Box Beam Set)

The Stabila 48-Inch/16-Inch Model-196 Level Set lets you take readings in virtually any part of the jobsite. The levels each have three vials, two vertical for finding plumb and one horizontal for determining level. These aluminum levels have a rigid... more

$189.99

FREE shipping

go to store

Overstock.com

(675,000+)
DAYTON 6L015 Coupling,Rigid Steel

DAYTON 6L015 Coupling,Rigid Steel

Rigid Steel Coupling, Bore Size 1/2 Inch, Overall Length 1 1/2 Inches, OD 1 Inch, Set Screw Size 1/4-28 x 1/4 Inch, Keyway Width 1/8 Inch, Zinc Plated Steel, With Keyway more

$5.41

go to store
Cotterman Rolling Work Platform - 800-Lb. Capacity, 24 Inch x 24 Inch Work Platform, 4 Step, Model 4WP2424RA3B4B8AC1P6, Gray

Cotterman Rolling Work Platform - 800-Lb. Capacity, 24 Inch x 24 Inch Work Platform, 4 Step, Model 4WP2424RA3B4B8AC1P6, Gray

Free Gift Card w/ Order

This heavy-duty work platform has enough room for two workers, plus tools. U.S.A. Caster Size in. 4 x 1 1/4, Caster Type Rigid 2, Dimensions W x D x H in. 28 x 51 x 70, Finish Type Gray powder coat, Base Size W x D in. 28 x 51, Capacity lbs. 800,... more

$929.99 $812.99

go to store
Roughneck Platform Truck - 1,000lb. Capacity, 30 Inch x 50 Inch

Roughneck Platform Truck - 1,000lb. Capacity, 30 Inch x 50 Inch

Free Gift Card w/ Order

The 1,000lb. Capacity Roughneck Platform Truck has big, air-filled 8in. caster tires to roll your cargo around smoothly and quietly. 2 rigid and 2 swivel casters. Load Capacity lbs. 1,000, Platform Height in. 10, Platform Size L x W in. 50 x 30, Wheel... more

$159.99 $139.99

go to store
Craftsman 976333001 Spacer Table for Table Saw

Craftsman 976333001 Spacer Table for Table Saw

Craftsman 976333001 Spacer Table for Table Saw. This table spacer is used on table saw. Also fits Rigid and Ryobi models. 42-Inch long, 10.2-Inch wide, and 1.6-Inch high. Package weight of this item is 5-Pound. Craftsman - America's Most Trusted Tool... more

$26.10

go to store
Vestil Adjustable Height Aluminum Gantry Crane - Pneumatic Casters, 1500-lb. Capacity, 10ft.L x 6 Inch H Beam, 8ft.2 Inch to 10ft.8 Inch Under I-Beam Range, Model AHA-15-10-10-PNU

Vestil Adjustable Height Aluminum Gantry Crane - Pneumatic Casters, 1500-lb. Capacity, 10ft.L x 6 Inch H Beam, 8ft.2 Inch to 10ft.8 Inch Under I-Beam Range, Model AHA-15-10-10-PNU

Free Gift Card w/ Order

The Vestil Adjustable Height Aluminum Gantry Crane is lightweight yet rigid and sturdy. All-aluminum construction makes it corrosion resistant and perfect for outdoor use. The lightweight I-beam allows height adjustment without the need of a hoist or... more

$2,739.99 $2,599.99

go to store
Grizzly H6317 Case Of 12, 2-3/8-Inch Fiber Tape

Grizzly H6317 Case Of 12, 2-3/8-Inch Fiber Tape

All packing tape rolls have 3" core diameters. Fiber Reinforced Brown Tape has moisture sensitive adhesive. Case of 12. 2-3/8" Fiber wide. more

$29.59

go to store
Grizzly H7620 3/16-Inch by 2-1/2-Inch Super Carbide 2-Flute End Mil Length

Grizzly H7620 3/16-Inch by 2-1/2-Inch Super Carbide 2-Flute End Mil Length

This Micro Grain Carbide End Mill is made for high speed machining and features 2 long flutes, 35 degree helix angle and TiALN coating. Made of 10% CO and 90% WC, they're suitable for use on carbon steel, tool steel, alloy steel, die/mold steel,... more

$34.93

go to store
Grizzly C1002Z 2-Inch Double Fluted Bit, 1/4-Inch Shank, 5/16-Inch Diameter

Grizzly C1002Z 2-Inch Double Fluted Bit, 1/4-Inch Shank, 5/16-Inch Diameter

Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate... more

$18.90

go to store
Grizzly G9341 Carbide Tip Side Mil Length Cutter 3-Inch by 1/2-Inch by 1-Inch B, 8T

Grizzly G9341 Carbide Tip Side Mil Length Cutter 3-Inch by 1/2-Inch by 1-Inch B, 8T

These Carbide Tipped Cutters are specially designed for those though to mill jobs where accuracy and finish are a must. They are supplied with keyed bores 1" and 1 1/4". Please note, G9338 thru G9350 are for stainless steel. G9351 thru G9359 are for... more

$42.58

FREE shipping

go to store
Grizzly G9355 Carbide Tip Side Mil Length Cutter, 3-Inch by 1/2-Inch by 1-Inch B, 6T

Grizzly G9355 Carbide Tip Side Mil Length Cutter, 3-Inch by 1/2-Inch by 1-Inch B, 6T

These Carbide Tipped Cutters are specially designed for those though to mill jobs where accuracy and finish are a must. They are supplied with keyed bores 1" and 1 1/4". Please note, G9338 thru G9350 are for stainless steel. G9351 thru G9359 are for... more

$47.40

FREE shipping

go to store
Grizzly H7628 1/4-Inch by 2-1/2-Inch Super Carbide 4-Flute End Mil Length

Grizzly H7628 1/4-Inch by 2-1/2-Inch Super Carbide 4-Flute End Mil Length

This 4-flute Micro Grain Carbide End Mill will give you stable cutting action and faster feed rates. And with the TiALN coating you can expect durability that far exceeds HSS or uncoated carbides many times over! The end is ground for plunging or 3... more

$43.10

FREE shipping

go to store
Grizzly C1035 Bul Length Nose Bit, 1/2-Inch Shank, 2-Inch Cutter Diameter

Grizzly C1035 Bul Length Nose Bit, 1/2-Inch Shank, 2-Inch Cutter Diameter

Used for full beading and rounding edges, particularly for casement and staircase work. Also used for moulding and picture frames or anywhere a round profile is needed. Especially attractive on countertops. more

$35.86

FREE shipping

go to store
Grizzly C1082 Flush Trim Bit, 1/2-Inch Shank, 1/2-Inch Diameter

Grizzly C1082 Flush Trim Bit, 1/2-Inch Shank, 1/2-Inch Diameter

Order G3846 replacement bearing for C1079. Order G3855 replacement bearing for C1080. Order G3848 replacement bearing for C1081. Order G3855 replacement bearing for C1082. Order G3848 replacement bearing for C1083. more

$16.66

go to store
Grizzly H7627 3/16-Inch by 2-1/2-Inch Super Carbide 4-Flute End Mil Length

Grizzly H7627 3/16-Inch by 2-1/2-Inch Super Carbide 4-Flute End Mil Length

This 4-flute Micro Grain Carbide End Mill will give you stable cutting action and faster feed rates. And with the TiALN coating you can expect durability that far exceeds HSS or uncoated carbides many times over! The end is ground for plunging or 3... more

$26.44

go to store
Grizzly G9345 Carbide Tip Side Mil Length Cutter 4-Inch by 1/2-Inch by 1-Inch B, 10T

Grizzly G9345 Carbide Tip Side Mil Length Cutter 4-Inch by 1/2-Inch by 1-Inch B, 10T

These Carbide Tipped Cutters are specially designed for those though to mill jobs where accuracy and finish are a must. They are supplied with keyed bores 1" and 1 1/4". Please note, G9338 thru G9350 are for stainless steel. G9351 thru G9359 are for... more

$50.78

FREE shipping

go to store
Grizzly H5901 Bul Length Nose Center MTNo.2 by 2-1/2-Inch

Grizzly H5901 Bul Length Nose Center MTNo.2 by 2-1/2-Inch

For turning hollow workpieces like pipe and tubing. 70Degree included angle. Precision sealed bearings for long life. more

$72.95

FREE shipping

go to store
Gardner Bender BR12515 1-1/4-Inch to 1-1/2-Inch Rigid and IMC Mechanical Bending Shoe

Gardner Bender BR12515 1-1/4-Inch to 1-1/2-Inch Rigid and IMC Mechanical Bending Shoe

The Gardner Bender BR12515 Mechanical Bending Shoe for 1-1/4-Inch to 1-1/2-Inch Rigid & IMC attaches to the BWF888 Sidewinder Bender jaws with a chain. This shoe is sold separately from the bender and jaws. Since 1959, Gardner Bender branded electrical... more

$1,075.29

go to store
Grizzly C1280 Radius Bit, 1/2-Inch Shank, 1/4-Inch Radius

Grizzly C1280 Radius Bit, 1/2-Inch Shank, 1/4-Inch Radius

Used for round bottom finishing and as a drawer pull. Use a template or guide when fluting. Overall Length: 2-1/4". more

$19.60

go to store
Grizzly C1083Z Flush Trim Bits, 1/2-Inch Shank, 5/8-Inch Diameter

Grizzly C1083Z Flush Trim Bits, 1/2-Inch Shank, 5/8-Inch Diameter

Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate... more

$21.70

go to store
Grizzly C1740 Anti-Kickback Cove Bit, 1/2-Inch Shank, 1/4-Inch Radius

Grizzly C1740 Anti-Kickback Cove Bit, 1/2-Inch Shank, 1/4-Inch Radius

Great for making mouldings and accenting case goods. High shear angle cuts smooth and cleans out fast. Can be used for pattern work. A large selection to choose from!. more

$24.67

go to store
Grizzly C1752 1/2-Inch Classica Length Bit with Bearing Guide, 1/4-Inch Shank

Grizzly C1752 1/2-Inch Classica Length Bit with Bearing Guide, 1/4-Inch Shank

Order G3855 replacement bearing. Cutter Diameter: 1-1/8". Cutting Length: 1/2". Cutting Width: 5/16". more

$43.51

FREE shipping

go to store
Grizzly C1274 Interna Length Round Bit, 1/2-Inch Shank, 1-1/8-Inch Radius

Grizzly C1274 Interna Length Round Bit, 1/2-Inch Shank, 1-1/8-Inch Radius

Used for fluting and grooving. Can be used on irregular shaped pieces as well. Overall Length: 3-1/2". more

$43.13

FREE shipping

go to store
Grizzly C1047 1/8-Inch Rabbeting Bit, 1/2-Inch Shank

Grizzly C1047 1/8-Inch Rabbeting Bit, 1/2-Inch Shank

Used for all types of rabbeting and slotting. Ideal for insetting glass, wood or plastic panels into frames. Great for making windows and picture frames. These are two-wing cutters. Use C1040 for "T" moulding and C1042 for No. "0" biscuit joining.... more

$16.20

go to store
Grizzly C1432Z Carbide Tipped Dovetai Length Jig Bits, 1/2-Inch Length 1/4-Inch Shank

Grizzly C1432Z Carbide Tipped Dovetai Length Jig Bits, 1/2-Inch Length 1/4-Inch Shank

Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate... more

$39.74

FREE shipping

go to store
Grizzly C1029 Bul Length Nose Bit, 1/2-Inch Shank, 1-1/8-Inch Cutter Diameter

Grizzly C1029 Bul Length Nose Bit, 1/2-Inch Shank, 1-1/8-Inch Cutter Diameter

Used for full beading and rounding edges, particularly for casement and staircase work. Also used for moulding and picture frames or anywhere a round profile is needed. Especially attractive on countertops. more

$30.57

go to store
Grizzly C1434 7/8-Inch 8-Degree Dovetai Length Jig Bit, 1/2-Inch Shank

Grizzly C1434 7/8-Inch 8-Degree Dovetai Length Jig Bit, 1/2-Inch Shank

These bits are especially made for use in dovetail fixtures and jigs. They have an extended shank length and a high rake angle for smooth, fast routing in all types of wood and wood composite material. more

$28.07

go to store
Grizzly C2154 1/2-Inch Cutter for 1-1/4-Inch B Stile and Rai Length Set, Entry Doors

Grizzly C2154 1/2-Inch Cutter for 1-1/4-Inch B Stile and Rai Length Set, Entry Doors

Customize your 1 1/4" bore stile and rail set for variable thickness panels in 1/4" increments with these straight cutters. For 3/4" thick panels and greater, double up the cutters for your desired panel thickness. Please note that changing the... more

$79.59

FREE shipping

go to store
Grizzly C2150 1/2-Inch Cutter for 1-1/4-Inch B Stile and Rai Length Set, Cabinet Doors

Grizzly C2150 1/2-Inch Cutter for 1-1/4-Inch B Stile and Rai Length Set, Cabinet Doors

Customize your 1 1/4" bore stile and rail sets for variable thickness panels in 1/4" increments with these straight cutters. For 3/4" thick panels and greater, double up the cutter for your desired panel thickness. Please note that changing the... more

$79.78

FREE shipping

go to store
Grizzly C1151 Cove Bit, 1/2-Inch Shank, 3/4-Inch Radius

Grizzly C1151 Cove Bit, 1/2-Inch Shank, 3/4-Inch Radius

Great for making mouldings and accenting case goods. High shear angle cuts smooth and cleans out fast. Can be used for pattern work. A large selection to choose from! Order G3855 replacement bearing. more

$43.52

FREE shipping

go to store
Grizzly C1464 Single Fluted Straight Bit, 1/4-Inch Shank, 1/2-Inch Diameter

Grizzly C1464 Single Fluted Straight Bit, 1/4-Inch Shank, 1/2-Inch Diameter

Single fluted cutters offer more backing behind the carbide and are great for plunging. Overall Length: 2". more

$15.62

go to store
Grizzly C1465Z Single Fluted Straight Bit, 1/2-Inch Shank, 1/4-Inch Diameter

Grizzly C1465Z Single Fluted Straight Bit, 1/2-Inch Shank, 1/4-Inch Diameter

Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate... more

$18.90

go to store