Facom Combination Punch Set, Comfort Grip, FA-MOD.CG

Facom Combination Punch Set, Comfort Grip, FA-MOD.CG

Combination Punch Set, Standard Tool (Accessory Needed for Tethering), Number of Pieces 11, Sizes Included (6) Drift Punches-2, 3, 4, 5, 6, 8mm, (4) Nail Punches-4, 5, 6, 8mm, (1) Center Punch-6mm, 1-Piece Design, Material Comfort Grip, Length 16-3/4... more

$73.00

FREE shipping

go to store
Brownells Hole Center Punches - #6 Hole Center Punch

Brownells Hole Center Punches - #6 Hole Center Punch

3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... more

$8.99

go to store
Brownells Hole Center Punches - #10 Hole Center Punch

Brownells Hole Center Punches - #10 Hole Center Punch

3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... more

$8.99

go to store
Brownells Hole Center Punches - #8 Hole Center Punch

Brownells Hole Center Punches - #8 Hole Center Punch

3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... more

$8.99

go to store
Grip Tools Metal Punches and Chisels - 28-Piece Set

Grip Tools Metal Punches and Chisels - 28-Piece Set

Free Gift Card w/ Order

This Grip punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge. Also comes with 12-pc. high carbon steel set, 6-pc. cold chisel... more

$29.99

go to store
Klutch Punch & Chisel Set - 12-Piece

Klutch Punch & Chisel Set - 12-Piece

Free Gift Card w/ Order

Quality Klutch tools are made of 40Cr chrome steel with heavy-duty hexagonal shafts and precision-machined punch and chisel ends. Includes 3 cold chisels 5/16in., 5/8in., 3/4in., 2 center punches 3/16in., 1/4in., scratch awl and 6 pin punches 1/16in.,... more

$29.99 $15.99

go to store
TEKTON Automatic Center Punch

TEKTON Automatic Center Punch

Free Shipping on Over 500K Items!

To prevent drills and screws from wandering in metal, wood, or plastic, use the TEKTON Automatic Center Punch to mark a dimpled starting point. Quick and easy to use, it delivers an automatic spring-driven strike when it is pressed against a surface.... more

$4.94

go to store
General Tools 79P/2 Replacement Point for General Tools 79 Steel Automatic Center Punch

General Tools 79P/2 Replacement Point for General Tools 79 Steel Automatic Center Punch

The General Tools and Instruments 79P Professional Automatic Center Punch 79 Replacement Point replaces a damaged or worn point on the 79 P. The 79 is an automatic center punch that punches, marks, scribes and starts drill, nail or screw holes. The... more

$6.00

go to store
Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter

Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter

The Starrett 117AA center punch with round shank is 3" long and has a 1/16" (1.5 mm) diameter tapered point. The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Center... more

$9.11

go to store
Mayhew Pro 62214 706-K Center Punch Kit, 5-Piece

Mayhew Pro 62214 706-K Center Punch Kit, 5-Piece

The Mayhew 62214 706-K Center Punch Kit, 5-Piece comes in a pouch. Set contains: 24000 1/4-Inch Black Oxide Center Punch, 24001 5/16-Inch Black Oxide Center Punch, 24002 3/8-Inch Black Oxide Center Punch, 24003 1/2-Inch Black Oxide Center Punch, 24004... more

$28.98

go to store
Wilde Tool Roll Spring Punch Set in Natural with Vinyl Roll Pouch (12-Piece)

Wilde Tool Roll Spring Punch Set in Natural with Vinyl Roll Pouch (12-Piece)

Free Shipping on Over 500K Items!

Each Wilde Roll Spring Punch has a pilot point that fits into the hollow center of the pin holding the driving shoulder of the punch in perfect contact position. Pins are quickly and easily removed without damage to wall of the hole or pin. more

$63.70

FREE shipping

go to store
5 Pc Center Punch Set

5 Pc Center Punch Set

Made of specially selected steel, hardened and properly tempered. Well proportioned, nicely finished and have a knurled finger grip. Points are ground at the proper angle to give maximum service, and the tips are accurately centered. Tool Type: Punch;... more

$80.56 $43.20

go to store
Klutch Taps & Dies - 56-Piece SAE Set

Klutch Taps & Dies - 56-Piece SAE Set

Free Gift Card w/ Order

This Klutch Tap & Die set includes 17 taps and 17 dies, die stock, T-handle tap wrench, 1/8in.-1/2in. tap wrench, auto center punch, 5 fine screw extractors, 5 coarse screw extractors, screwdriver, screwdriver pitch gauge, 5 high speed steel drills and... more

$69.99

go to store
General 79P Steel Automatic Center Punch Replacement Point (Various tools), Multi

General 79P Steel Automatic Center Punch Replacement Point (Various tools), Multi

Replacement point For use on steel automatic center punch Made from hardened tool steel Carded Replacement steel point for Steel Automatic Center Punch (#79). Made from hardened tool steel. Punch Points are designed to fit Automatic Center Punches... more

$14.59

go to store

Overstock.com

(675,000+)
Stanley Hand Tools 16-228 5/16" Center Punch (Various tools), Multi

Stanley Hand Tools 16-228 5/16" Center Punch (Various tools), Multi

Used for making metal or making indentations for starting drill holes One-piece construction forged from tempered tool steel for strength Hardened and tempered for long life 5/16in Carded Material: Metal Color: Multi more

$15.99

go to store

Overstock.com

(675,000+)
4-1/4 in. x 1/4 in. Center Punch

4-1/4 in. x 1/4 in. Center Punch

Free Shipping on Over 500K Items!

The Klein 66310 Center Punch is made from high-carbon steel for durability. Smooth-ground points are heat-treated to stay sharp and true longer. Center punch has a corrosion-resistant black finish. more

$5.56

go to store
ADC Window Punch with Pocket Clip Center Punch

ADC Window Punch with Pocket Clip Center Punch

ADC Window Punch with Pocket Clip Center PunchADC medical instruments and accessories have been carefully designed to meet the rigorous demands of the most discriminating healthcare professionals throughout the world. ADC products are manufactured from... more

$10.99

go to store
Brownells Starrett 5/32" Center Punch - Starrett 5/32" C-Punch

Brownells Starrett 5/32" Center Punch - Starrett 5/32" C-Punch

Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier. Mfg: Brownells SPECS: 4" (10.2cm) long. 5⁄32" (4mm) punch, 3⁄8" diameter body. more

$8.99

go to store
Mayhew Steel Single Center Punches - Center Punch 222

Mayhew Steel Single Center Punches - Center Punch 222

Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Mfg: Mayhew Steel SPECS: Punch 222 is �" (6.3mm) O.D. x 3�" (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) O.D. x 4" (10.2cm) long. more

$4.59

go to store
Brownells Roll Pin Punches - Roll Pin Punch Kit

Brownells Roll Pin Punches - Roll Pin Punch Kit

The ONLY way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing. Mfg: Brownells... more

$19.99

go to store
Starrett 117D Center Punch With Round Shank, 4" Length, 5/32" Tapered Point Diameter

Starrett 117D Center Punch With Round Shank, 4" Length, 5/32" Tapered Point Diameter

The Starrett 117D center punch with round shank is 4" long and has a 5/32" (4 mm) diameter tapered point. The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Center... more

$9.11

go to store
BAND-IT SM1700 Air Tool With Automatic Cut Off And Foot Control Features, For Use With BAND-IT 5/8" Center Punch Clamps

BAND-IT SM1700 Air Tool With Automatic Cut Off And Foot Control Features, For Use With BAND-IT 5/8" Center Punch Clamps

Adjustable air regulators and gauges provide consistency of tool performance. Foot peddle allows hose assemblers increased control of clamp placement. Built in automatic cut-off cylinder increases productivity. Bench or cart mounted Heavy duty... more

$3,016.52

FREE shipping

go to store
Mayhew Steel Single Center Punches - Center Punch 455

Mayhew Steel Single Center Punches - Center Punch 455

Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Mfg: Mayhew Steel SPECS: Punch 222 is �" (6.3mm) O.D. x 3�" (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) O.D. x 4" (10.2cm) long. more

$4.91 $3.99

go to store
SpringTools AMA996 4 Piece Metalworking Set with High Speed Steel Center Punch, Self Centering Center Punch, 5/16-Inch Cold Chisel, Combination Prick Punch & Center Punch.

SpringTools AMA996 4 Piece Metalworking Set with High Speed Steel Center Punch, Self Centering Center Punch, 5/16-Inch Cold Chisel, Combination Prick Punch & Center Punch.

High Speed Steel Center Punch Hardened to Rc65 for Precision Marking on Hardened Steel Surfaces. High Temper Steel Tip Can Be Resharpened Without Loss of Hardness. This Tool Is Ideal For Removing Rivit Bodies 5/16" Cold Chisel Is Designed To Remove... more

$39.95

FREE shipping

go to store
BAND-IT T30069 Center Punch Tool, Includes Adapter For 3/8" Wide Center Punch Clamps, Hand Tool To Be Used With 5/8" Wide Center Punch Style Clamps

BAND-IT T30069 Center Punch Tool, Includes Adapter For 3/8" Wide Center Punch Clamps, Hand Tool To Be Used With 5/8" Wide Center Punch Style Clamps

The BAND-IT T30069 center punch tool has a tension handle and a floating punch head and can be used on a workbench to tighten and secure a BAND-IT center punch clamp around a fitting. The tool accepts BAND-IT center punch clamps that are 5/8" wide and... more

$220.95

FREE shipping

go to store
Dixon K8 Galvanized Steel Pre-Formed Band Clamp, 5/8" Band Width, 2" ID (Pack of 100)

Dixon K8 Galvanized Steel Pre-Formed Band Clamp, 5/8" Band Width, 2" ID (Pack of 100)

Pre formed center punched of roll over band clamp. Made from galvanized steel. For use with center punch or roll over tools. more

$31.45

go to store
Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

Made of chrome vanadium steel for toughness and durability, the Stalwart 16-piece chisel and punch set will help you get the job done. Great for metal working, wood workers, artists, and automotive or body work, this is an essential set to add to any... more

$22.21

go to store
Starrett Automatic Center Punch - Starrett Tip

Starrett Automatic Center Punch - Starrett Tip

Automatic, one hand operation leaves the other hand free to steady the work. Fully adjustable for strength of impact. All working parts are hardened. Mfg: Starrett SPECS: Steel. 3-53/64" (9.7cm) long. .405" (10.3mm) diameter. 1�" oz. (42.5g). Knurled... more

$6.49

go to store
Starrett S816PC 5-Piece Punch Set, 3 Prick Punches with 5/64"-5/32" Diameters and 2 Center Punches with 1/16" and 3/32" Diameters, In Plastic Case

Starrett S816PC 5-Piece Punch Set, 3 Prick Punches with 5/64"-5/32" Diameters and 2 Center Punches with 1/16" and 3/32" Diameters, In Plastic Case

The Starrett S816PC five-piece set includes three prick punches with 5/64", 1/8", and 5/32" diameter tapered points and two center punches with 1/16" and 3/32" diameter tapered points. The prick punches provide a sharper point for more precise... more

$41.24

FREE shipping

go to store
Dixon KS3 Stainless Steel Universal Preformed Band Clamp, 3/8" Band Width, 13/16" ID (Pack of 25)

Dixon KS3 Stainless Steel Universal Preformed Band Clamp, 3/8" Band Width, 13/16" ID (Pack of 25)

Pre formed center punched or roll over band clamp. Made from stainless steel. Band is 300 series stainless steel and buckle is 302 series stainless steel. For use with center punch or roll over tools. more

$35.13

FREE shipping

go to store
SpringTools WWA996 4 Piece Woodworking Set with Center Punch, Nail Set, Combo Nail Set, Self Centering Brad Setter, Self Centering Center Punch

SpringTools WWA996 4 Piece Woodworking Set with Center Punch, Nail Set, Combo Nail Set, Self Centering Brad Setter, Self Centering Center Punch

Set Any Finish Nail Or Brad. Nail Set Is Ideal in Repairing Brads From Pnumatic Nailers That Mis-Fire And Don't Go All The Way Into The Wood Surface. Uniformly Countersink Finish Nails Into Any Wood Surface Without A Hammer. Perfect for Fine... more

$37.80

FREE shipping

go to store
Mayhew Steel Single Prick Punches - 440 Prick Punch

Mayhew Steel Single Prick Punches - 440 Prick Punch

Fine, sharp point for marking spots before center punching. Gives better visibility, more precision to your marking. Tap lightly as a mark only; use Center Punch to deepen for drilling. Mfg: Mayhew Steel SPECS: 5⁄16" (7.9mm) O.D., 4" (10.2cm) long. more

$5.51

go to store
Center Punches - punch center

Center Punches - punch center

Features: -Modified parabolic struck end for greater resistance to mushrooming and chipping. -For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points. -Stock Shape: Hex. -Tip Type: Round. Product... more

$16.10

go to store
BAND-IT S03869 Center Punch Tool, Light Duty Hand Tool To Be Used With 3/8" And 5/8" Width Center Punch Style Clamps

BAND-IT S03869 Center Punch Tool, Light Duty Hand Tool To Be Used With 3/8" And 5/8" Width Center Punch Style Clamps

Easy to use Ratchet drive can be switched to use either the 3/8" wide or 5/8" wide slots of this pocket style tool. Installs 3/8" wide Center Punch Clamps in both 13/16" diameter and 1 3/8" diameter. Installs 5/8" wide Center Punch Clamps ranging from... more

$62.41

FREE shipping

go to store
Spring Tools 32R00-1 Hammerless Double Ended Prick Punch & Center Punch

Spring Tools 32R00-1 Hammerless Double Ended Prick Punch & Center Punch

Force = mass x acceleration this has been a simple yet very powerful concept since isaac newton’s time. At Spring Tools, we create tools based on this principal. Our tools are about the size of a ball point pen yet have over 3500 lbs of striking impact... more

$11.95

go to store
4-1/2 in. x 5/16 in. Center Punch

4-1/2 in. x 5/16 in. Center Punch

Free Shipping on Over 500K Items!

The Klein 66311 Center Punch is made from high-carbon steel for durability. Smooth-ground points are heat-treated to stay sharp and true longer. Center punch has a corrosion-resistant black finish. more

$6.13

go to store
5 in. x 3/8 in. Center Punch

5 in. x 3/8 in. Center Punch

Free Shipping on Over 500K Items!

The Klein 66312 Center Punch is made from high-carbon steel for durability. Smooth-ground points are heat-treated to stay sharp and true longer. Center punch has a corrosion-resistant black finish. more

$7.83

go to store
Heavy-Duty Automatic Center Punch

Heavy-Duty Automatic Center Punch

Free Shipping on Over 500K Items!

General Tool's largest, most robust Center Punch is the professional's choice for marking and staking the toughest metals. The one-handed operation makes accurate marks without the need for a hammer. In addition, the amount of impact force can be... more

$26.75

go to store
General Tools Hardened Steel Center Punch

General Tools Hardened Steel Center Punch

Free Shipping on Over 500K Items!

Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. The General Tools Hardened Steel Center Punch is tough enough to work with heavy-duty metals, yet easy to use with wood or... more

$21.10

go to store
5/8 in. Center Punch

5/8 in. Center Punch

Free Shipping on Over 500K Items!

The sharp point of the TEKTON 5/8 in. Center Punch marks workpiece with a dimple, creating an exact starting spot for your drill that prevents it from wandering. It works on just about any material softer than the point itself, including cast iron,... more

$6.49

go to store

More information about Hand Tools

Best prices on Facom center punch in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.