Mounted Garage Racks & Shelving: Everbilt Tool Storage Bins Wall-Mount or Peggable Multi-Purpose Tool Holder Gray 01158

Mounted Garage Racks & Shelving: Everbilt Tool Storage Bins Wall-Mount or Peggable Multi-Purpose Tool Holder Gray 01158

Free Shipping on Over 500K Items!

The Everbilt Wall-Mount or Peggable Multipurpose Tool Holder can mount to peg board, studded walls or solid walls. It can be used in the garage, workshop, tool shed, basement, and throughout the home. The tool bar fits a variety of tools such as... more

$6.57

go to store

HomeDepot.com

(100,000+)
Tool Belts: Klein Tools Tool Belt Holsters 3 in. Connecting Bar Holder with Lock Collar, Beige 5459SLVR

Tool Belts: Klein Tools Tool Belt Holsters 3 in. Connecting Bar Holder with Lock Collar, Beige 5459SLVR

Free Shipping on Over 500K Items!

Keep your connecting bar safely close at hand with Klein Tools Connecting Bar Holder and Lock Collar. The lock collar slides securely over the connecting bar. This allows the bar to be positioned safely into the specially designed holder that can be... more

$25.18

go to store

HomeDepot.com

(100,000+)
GearWrench Holders & Clamps Straight Hose Clamp Pliers 3976D

GearWrench Holders & Clamps Straight Hose Clamp Pliers 3976D

Free Shipping on Over 500K Items!

The GearWrench Straight Hose Clamp Pliers feature a dual dipped grip for more control. GearWrench is 1 the leading names in automotive repair tools. Packaging and Branding may vary between GearWrench and KD tools due to a brand consolidation. more

$20.97

go to store

HomeDepot.com

(100,000+)
WESTWARD 13T131 Plier Holder, Leather, 23/4x3/4 x83/4 In

WESTWARD 13T131 Plier Holder, Leather, 23/4x3/4 x83/4 In

Plier Holder, Material Top Grain Leather, Number of Pockets 1, Width 23/4 In., Depth 3/4 In., Height 83/4 In., Fits Belts Up To 23/4 In., Color Natural, Heat Molded, Closed Bottom more

$3.87

go to store
(25,000+)
4GZF4 End Mill Holder, CAT40, Bore Dia 0.7500 In

4GZF4 End Mill Holder, CAT40, Bore Dia 0.7500 In

End Mill Holder, Dimension Type Decimal Inch, Taper Size CAT40, Bore Dia. 0.7500 In., Projection 2.56 In., Nose Type Straight, Nose Dia. 1.89 In., Bore Depth 2.24 In., End Single, Standards ANSI B5.5 1994 more

$79.87

FREE shipping

go to store
(25,000+)
CENTAUR B40E1000 End Mill Holder,BT40,Bore Dia. 1.0000 In G8032631

CENTAUR B40E1000 End Mill Holder,BT40,Bore Dia. 1.0000 In G8032631

Endmill Holder, BT Flange, Series BT40, Capacity 1 In, Hole Dia. 1 In, Projection Gage Line to Nose End 4 In. more

$95.18

FREE shipping

go to store
(25,000+)
Quantum Industrial-Strength 2-Shelf Plastic Cart - Tool Holder, Model PC4026-33TR

Quantum Industrial-Strength 2-Shelf Plastic Cart - Tool Holder, Model PC4026-33TR

This Quantum Industrial-Strength 2-Shelf Plastic Cart with tool holder is an ultra-tough, no-maintenance cart that withstands heavy-use industrial and commercial applications. Wheel Type 2 Swivel, 2 Rigid casters, Total Capacity lbs. 550, Dimensions W... more

$169.99

go to store
(10,000+)
Fox Run Craftsmen Magnetic Tool Holder 6618

Fox Run Craftsmen Magnetic Tool Holder 6618

Fox Run Craftsmen Magnetic Tool Holder The Fox Run Craftsmen Magnetic Tool Holder is a perfect kitchen accessory. This brown cutlery storage unit is constructed from stainless steel, making it sturdy and durable. This Magnetic Tool Holder from Fox Run... more

$30.00 $18.65

go to store
Bosch 3-Amp Oscillating Tool Kit Mx30ec-21

Bosch 3-Amp Oscillating Tool Kit Mx30ec-21

Versatile designed for many applications and materials including flush-cutting plunge cutting sanding grinding grout removal and scraping. Toolless accessory change lever is a durable accessory holder that allows quick change of OIS oscillating tool... more

$199.00

go to store
(10,000+)
Bosch 3-Amp Oscillating Tool Kit Mx30ek-33

Bosch 3-Amp Oscillating Tool Kit Mx30ek-33

Versatile designed for many applications and materials including flush-cutting plunge cutting sanding grinding grout removal and scraping. Toolless accessory change lever is a durable accessory holder that allows quick change of OIS oscillating tool... more

$249.00

go to store
(10,000+)
Dewalt 18-Volt Cordless Caulk Gun (Bare Tool) Dc546b

Dewalt 18-Volt Cordless Caulk Gun (Bare Tool) Dc546b

360 rotatable cartridge holder fits 29-oz and quart size cartridges. Tool delivers up to 650-lbs pushing force to dispense the highest viscosity adhesives and sealants. Auto-reverse feature helps reduce drips and waste allowing easy clean-up. more

$249.00

go to store
(10,000+)
Grip Magnetic Tool Holders - 3-Piece Set

Grip Magnetic Tool Holders - 3-Piece Set

The Grip tool holders feature powerful magnets to hold tools and other ferrous objects in place. Keeps tools off the floor and available for use. In 8in., 12in. and 18in. sizes. Includes installation hardware. Product Style Holding magnet, Height in.... more

$15.99

go to store
(10,000+)
Roll Pin Holders - 3.5mm (.138") Dia, 5"(12.7cm) O/A Length

Roll Pin Holders - 3.5mm (.138") Dia, 5"(12.7cm) O/A Length

Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on... more

$14.99

go to store
Wrench Holder - 65272

Wrench Holder - 65272

Pricing Subject to Change. Wrench Holder more

$5.99

go to store
Sinclair Case Mouth Deburring Tool Holder - Sinclair/L.E. Wilson Deburring Tool Package

Sinclair Case Mouth Deburring Tool Holder - Sinclair/L.E. Wilson Deburring Tool Package

Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with L.E. Wilson deburring... more

$29.99

go to store
Roll Pin Holders - #4 - 1/8"(3.2mm) Dia, 5"(12.7cm) O/A Length

Roll Pin Holders - #4 - 1/8"(3.2mm) Dia, 5"(12.7cm) O/A Length

Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on... more

$15.99

go to store
Vanadium Wrenches - 11-Piece SAE Set

Vanadium Wrenches - 11-Piece SAE Set

Box and open end wrenches in 1/4in. thru 7/8in. sizes by 16ths. With holder/hanger. SAE Sizes in. 1/4-7/8, Finish Type Mirror, Material Type Chrome vanadium, Pieces qty. 11, Measurement Type Standard SAE, Storage Type Rack. Includes 1/4in., 5/16in.,... more

$10.00

go to store
(10,000+)
Park AWS-14 Mini Fold-Up Hex Key Multi-Tool

Park AWS-14 Mini Fold-Up Hex Key Multi-Tool

Park AWS-14 Mini Fold-Up Hex Key Multi-Tool A diminutive version of Park's world famous fold-up tools, featuring 3, 4, and 5mm hexes, a T25 Torx compatible bit, combo screwdriver, and a key ring holder, all in a tough composite case. 2.6 in (66mm) long... more

$9.86

FREE shipping

go to store
Park AWS-13 Micro Fold-Up Hex Key Multi-Tool

Park AWS-13 Micro Fold-Up Hex Key Multi-Tool

Park AWS-13 Micro Fold-Up Hex Key Multi-Tool A diminutive version of Park's world famous fold-up tools, featuring 3, 4, and 5mm hexes, a T25 Torx compatible bit, combo screwdriver, and a key ring holder, all in a tough composite case. 2.25 in (57mm)... more

$9.44

FREE shipping

go to store
Park Tool HXS-2 Hex Wrench Set With Holder

Park Tool HXS-2 Hex Wrench Set With Holder

Park Tool HXS-2 Hex Wrench Set With Holder These shop quality L-shaped hex wrenches have a genuine Bondhus ball driver tip on the long arm (excluding 8 and 10 mm) for hard to reach bolt heads and a straight tip on the short arm for high torque... more

$31.46

FREE shipping

go to store
Irwin 93718 Hex Shank Insert Bit Holder 1/4"

Irwin 93718 Hex Shank Insert Bit Holder 1/4"

$44.39 $36.11

go to store
Custom Leathercraft 464 Tape Rule Holder Pocket

Custom Leathercraft 464 Tape Rule Holder Pocket

$8.04 $5.08

go to store
Custom Leathercraft 464 Tape Rule Holder

Custom Leathercraft 464 Tape Rule Holder

$8.29 $6.37

go to store
Outdoor Edge Harpoon Survival Tool Fixed-Blade Knife - Green

Outdoor Edge Harpoon Survival Tool Fixed-Blade Knife - Green

$5 Shipping on $99 Min

The Outdoor Edge Harpoon Survival Tool easily converts from a practical, fixed-blade outdoor knife to a spear in seconds. Simply slot a green shaft with the sharp hawksbill end of the handle and tie the knife in or thread the accessory blade holder... more

$34.99

go to store
AquaSkinz Elite Hunter Plier Holster - Stainless (PLIERS HOLDER)

AquaSkinz Elite Hunter Plier Holster - Stainless (PLIERS HOLDER)

$5 Shipping on $99 Min

Sized to accommodate most popular pliers, built to last and designed to provide a secure hold, AquaSkinzs Elite Hunter Plier Holster keeps one of your most important fishing tools within easy reach when youre out battling monsters in the surf.... more

$39.99

go to store
Lehigh Group Pegboard Multi Tool Holder 18777-6

Lehigh Group Pegboard Multi Tool Holder 18777-6

Lehigh Group Pegboard Multi Tool Holder Features: -Tool holder.-Carded.-Fits both 0.13" and 0.25" pegboard.-Part Type: Hooks.-Wall Type: Pegboard.Dimensions: -Overall Height - Top to Bottom: 12.5.-Overall Width - Side to Side: 4.63.-Overall Depth -... more

$21.99 $12.99

go to store
Hornady American Series Die Sets

Hornady American Series Die Sets

$5 Shipping on $99 Min

Perfect for maximizing the savings of your reloads, Hornadys American Series Die Sets come with a free shell holder and two extra decapping pins to combine exceptional value with incredible performance. Die bodies are precision-reamed from premium... more

$28.99

go to store
Pearl AX-25L Extra Long Clamp (Clamp, Extra Long)

Pearl AX-25L Extra Long Clamp (Clamp, Extra Long)

Drum Accessories - Are you looking to add a cymbal to you drum kit? Tom? Cowbell? The Pearl AX-25L is the perfect way to easily and inexpensively add a new toy to your rig. Add any stand, arm, or holder from the size of 1/2" to 1-1/8". Each side... more

$65.00 $32.99

go to store
(2,500+)
HHIP 3900-0223 3-piece Floating Die Holder Set

HHIP 3900-0223 3-piece Floating Die Holder Set

One Piece Construction. more

$41.99

FREE shipping

go to store
Dorian Tool QITPN-INSS Quadra Indexing Quick Change Tool Post and Toolholders Kit, 17"-32" Lathe Swing, 1-1/4" - 1-1/2" Capacity

Dorian Tool QITPN-INSS Quadra Indexing Quick Change Tool Post and Toolholders Kit, 17"-32" Lathe Swing, 1-1/4" - 1-1/2" Capacity

The multi-patented tool post with the most advanced indexing and locking technology. Push the handle away to release the indexing mechanism, rotate tool post to desired position and then pull the handle to lock the indexing mechanism. Precision ground.... more

$2,947.09

FREE shipping

go to store
MagnoGrip 002-290 Quick Snap Magnetic Tape Measure Holder

MagnoGrip 002-290 Quick Snap Magnetic Tape Measure Holder

MagnoGrip 002-290 Quick Snap Magnetic Tape Measure Holder features a quick and easy "Snap On, Snap Off" System. Provides fast access to tape measure. Patented Slip-On Magnet; Requires no changes to measuring tape. Designed to work with tape measures... more

$12.99

go to store
Dial Test Indicator Gauge On/Off Magnetic Base Flexible Stand Holder

Dial Test Indicator Gauge On/Off Magnetic Base Flexible Stand Holder

Specification: Product Name Magnetic Stand Clamp Hole Dia 7.9mm / 3.1" Overall Length(Approx) 19.5cm / 7.7" Magnetic Base Size(Approx) 4.1 x 3 x 3.6cm / 1.6" x 1.2" x 1.4"(L*W*H) Material Metal, Magnet, Plastic Color Black, Red,Burgundy Net Weight 367g... more

$29.11

FREE shipping

go to store
RIDGID 425 Portable 2-1/2 Tristand Chain Vise 16703

RIDGID 425 Portable 2-1/2 Tristand Chain Vise 16703

Ridgid The integral handle makes transporting easy. It also allows for opening and closing the unit in one simple motion. Ideal for pipe applications ranging in size from 1/8 - 2-1/2. The work surface is equipped with two tool holders. The compact size... more

$324.53

go to store
Small Parts Organizers: Dickies Tool Bags 2-Compartment Hammer Holder Gray/Tan 57017

Small Parts Organizers: Dickies Tool Bags 2-Compartment Hammer Holder Gray/Tan 57017

Free Shipping on Over 500K Items!

The Dickies Hammer Holder has a steel hammer holder designed to keep your hammer in place, a tool loop, a pencil or screwdriver pocket and a pleated pocket. The belt loop fits 3 in. belts to securely hold the hammer for easy accessibility. Color:... more

$5.50

go to store

HomeDepot.com

(100,000+)
Armstrong Punches Tool Steel Pin Punch Set (10-Piece) 70-552

Armstrong Punches Tool Steel Pin Punch Set (10-Piece) 70-552

Free Shipping on Over 500K Items!

The Armstrong 10-Piece Tool Steel Pin Punch comes in a vinyl roll for organization and tool storage. The tools have a black oxide finish for corrosion resistance. The hex stock fits more securely in a punch and chisel holder and also reduces the... more

$88.97

FREE shipping

go to store

HomeDepot.com

(100,000+)
Small Parts Organizers: Dickies Tool Bags 5-Compartment Large Pliers Holder Gray/Tan 57015

Small Parts Organizers: Dickies Tool Bags 5-Compartment Large Pliers Holder Gray/Tan 57015

Free Shipping on Over 500K Items!

The Dickies Large Pliers Holder is a superior quality tool holder with 5 pockets and 4 tool loops that holds larger type pliers and like items as well as screw drivers, pencils, punches and other small tools for easy tool access. The holder features a... more

$7.72

go to store

HomeDepot.com

(100,000+)
Gedore 6-Piece Set Pin Punch With Plastic Holder 8757670

Gedore 6-Piece Set Pin Punch With Plastic Holder 8757670

Pin punch 6 piece set with plastic holder. Chrome-molybdenum-vanadium air hardening steel 45crmov7. Carefully hardened and tempered along the full length. more

$48.63

FREE shipping

go to store
(10,000+)
KLEIN TOOLS 5456TS Hammer Holder w/Strap, Metal Ring

KLEIN TOOLS 5456TS Hammer Holder w/Strap, Metal Ring

Hammer Holder, Tunnel Belt, Number of Pockets , Width (In.) 4.3125, Depth (In.) 2, Height (In.) 10, Fits Belts Up To (In.) 4, Leather Material, Black Color, Standard Tool(Accessory Needed for Tethering), Heavymetal hammer loop riveted to panel; riveted... more

$14.09

go to store
(25,000+)
Van Mark Products CD24 Aluminum Coil Holder

Van Mark Products CD24 Aluminum Coil Holder

$596.56 $514.64

FREE shipping

go to store
The Hillman Group Magnetic Screwdriving Bit Holder 4829

The Hillman Group Magnetic Screwdriving Bit Holder 4829

Magnetic chuck holders are used with insert bits to convert any variable-speed drill into a power screwdriver. The magnetic shaft holds the bit securely while allowing for quick and easy bit changes. 14-in size. more

$42.57

go to store
(10,000+)

More information about Hand Tools

Best prices on Holder in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.
Show
Hide
Hide