Best Seller
Malco DSKR Deluxe Starter Redline Kit with A Free Tool Bag

Malco DSKR Deluxe Starter Redline Kit with A Free Tool Bag

30 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a FREE No. TB1 Soft-Sided Tool Bag 17" x 8" x 8" (43 x 20 x 20 cm). Included: C5R REDLINE Pipe Crimper 5 Blade, SL1R REDLINE Snap Lock Punch, N1R REDLINE Hand Notched, S2R REDLINE Hand... more

$618.63

FREE shipping

go to store
Gardner Bender GS-359D Electrical F-Connector, Coax Stripper & Crimper, Standard & Quad Shield Cable, RG-59 & RG-6 Wire, Hand Tool, 6¼ in.

Gardner Bender GS-359D Electrical F-Connector, Coax Stripper & Crimper, Standard & Quad Shield Cable, RG-59 & RG-6 Wire, Hand Tool, 6¼ in.

Coax Cable Stripper/Cutter Cuts and strips RG-59 and RG-6 coaxial cable. Can be used with both standard and quad shield cable. Multiple size stripping stations strip both the outer jacket and inner conductor. Exclusive hex-shaped slot helps push “F”... more

$15.11

go to store
Best Seller
Gardner Bender 931B Aluminum Conduit Hand Bender Tool, Bends ¾ Inch EMT & ½ Inch Rigid Aluminum Conduit, 6 Inch Bending Radius, Acrylic Level Gauge, Embossed Sight Line Angles, Fits BH-75 Handle

Gardner Bender 931B Aluminum Conduit Hand Bender Tool, Bends ¾ Inch EMT & ½ Inch Rigid Aluminum Conduit, 6 Inch Bending Radius, Acrylic Level Gauge, Embossed Sight Line Angles, Fits BH-75 Handle

Gardner Bender offers a complete range of solutions for conduit fishing and cable pulling, with the contractor in mind. From fish tapes to powered cable pullers, our products are designed around durability, innovation, and ease of use. Our series of... more

$30.99

go to store
General Hand Tool Kit,No. of Pcs. 16 MALCO STKMR

General Hand Tool Kit,No. of Pcs. 16 MALCO STKMR

This general hand tool kit from Malco is sure to become your go-to for taking on even the most challenging jobs.This general hand tool kit includes 16 well-constructed pieces.A bag is included for convenient storage and packing. more

$490.09

go to store
General Hand Tool Kit,No. of Pcs. 30 MALCO DSKR

General Hand Tool Kit,No. of Pcs. 30 MALCO DSKR

This general hand tool kit from Malco is great to have on hand.This general hand tool kit includes 30 well-constructed pieces.A bag is included for convenient storage and packing. more

$684.72

go to store
Gardner Bender 50-Ft. Steel Fish Tape

Gardner Bender 50-Ft. Steel Fish Tape

Used to guide electrical wire through conduits and walls. 50in. x 1/8in. tape winds directly into housing no need to snap retaining tapes and no sticky residue. Hand trigger helps wind tape tightly as it automatically wipes off excess lubricant. Finger... more

$37.99

go to store
Conduit Bender Head,1/2 EMT,Rigid IDEAL 74-001

Conduit Bender Head,1/2 EMT,Rigid IDEAL 74-001

Hand conduit benders and handles typically have rounded, rocking heads attached to a long handle for leverage. Take a look at the features for Ideal Conduit Bender Head. Application: For Conduit Bending, Construction: Ductile Iron. more

$41.59

go to store
Dilwe 2 in 1 180° Handheld Red Pipe Bender Heavy Duty Tube Bending Tool 15mm/22mm, 180° tube bender,Tube Bender

Dilwe 2 in 1 180° Handheld Red Pipe Bender Heavy Duty Tube Bending Tool 15mm/22mm, 180° tube bender,Tube Bender

Description:2 in 1 multifunctional pipe bender works well on tubes of 15mm and22mm. It is perfect for copper tubes and aluminum tubes. By using the bender,you can get a wanted angle, as it can bend the tube in a wide range of 180degree. Features:1.... more

$36.42 $31.48

FREE shipping

go to store
30" Sheet Metal Steel Hand Bender Bend Bench Mounted Folding Brake Bending Tool

30" Sheet Metal Steel Hand Bender Bend Bench Mounted Folding Brake Bending Tool

This 30" bending brake is a quality tool for working on furnace ductwork, shutters, auto body projects and more! The rugged steel construction of the bending brake allows it to bend metal up to 90 degree and has the versatility to bend 17 gauge steel,... more

$129.99

FREE shipping

go to store
930B Aluminum Conduit Hand Bender Tool, Bends ½ Inch. EMT Electrical Conduit, Bending Tool, Level Gauge, Embossed Sight Angles, Fits BH-75 Handle, Bends 1/2 EMT.., By Gardner Bender

930B Aluminum Conduit Hand Bender Tool, Bends ½ Inch. EMT Electrical Conduit, Bending Tool, Level Gauge, Embossed Sight Angles, Fits BH-75 Handle, Bends 1/2 EMT.., By Gardner Bender

All of our productsWalmartply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Product Description Gardner EMT Aluminum Hand Bender Bends 1/2" EMT conduit. The built-in acrylic... more

$21.49

FREE shipping

go to store
Greenlee 1811 Heavy Duty Little Kicker Offset Hand Bender for 3/4-Inch EMT

Greenlee 1811 Heavy Duty Little Kicker Offset Hand Bender for 3/4-Inch EMT

Greenlee's offset bender bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit. Size: 3/4'. more

$329.25

FREE shipping

go to store
Greenlee 842FH Bender,Hand - 1 W/Handle G3176820

Greenlee 842FH Bender,Hand - 1 W/Handle G3176820

Bender,Hand - 1 W/Handle more

$130.37

FREE shipping

go to store
Klein Tools Conduit Bender

Klein Tools Conduit Bender

Hand conduit benders and handles are used for a variety of electrical and construction applications. Take a look at the features for Klein Tools Conduit Bender. Application: For Stub Ups, Offsets, Back-to-Back and Saddle Bends., Includes: Bender Head... more

$64.40

FREE shipping

go to store
Gb Electrical Gardner Bender Hand Conduit Bender Handle BH-75

Gb Electrical Gardner Bender Hand Conduit Bender Handle BH-75

$19.99 $17.82

go to store
Gardner Bender 930B Hand Bender, 1/2 In Thinwall Capacity, 5 In Bend, Aluminum

Gardner Bender 930B Hand Bender, 1/2 In Thinwall Capacity, 5 In Bend, Aluminum

$30.05 $27.02

go to store
Gb-Gardner Bender Bigben 961 Hand Bender, 3/4 In Thinwall, 1/2 In Rigid Capacity, 6 In Bend, Aluminum

Gb-Gardner Bender Bigben 961 Hand Bender, 3/4 In Thinwall, 1/2 In Rigid Capacity, 6 In Bend, Aluminum

$29.33 $26.41

go to store
Greenlee 52034124 Site-Rite 1 in. EMT/IMC/Rigid Hand Bender Head with Handle

Greenlee 52034124 Site-Rite 1 in. EMT/IMC/Rigid Hand Bender Head with Handle

Site-Rite 1 in. EMT/IMC/Rigid Hand Bender Head with Handle - 842AH. Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Aluminum... more

$69.99

go to store
Greenlee 52034123 Site-Rite 3/4 in. EMT/IMC/Rigid Hand Bender Head with Handle

Greenlee 52034123 Site-Rite 3/4 in. EMT/IMC/Rigid Hand Bender Head with Handle

Site-Rite 3/4 in. EMT/IMC/Rigid Hand Bender Head with Handle - 841AH. Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Aluminum... more

$52.99

go to store
Greenlee 52034122 Site-Rite 1/2 in. EMT Hand Bender Head with Handle

Greenlee 52034122 Site-Rite 1/2 in. EMT Hand Bender Head with Handle

Site-Rite 1/2 in. EMT Hand Bender Head with Handle - 840AH. Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Aluminum construction... more

$44.99

go to store
Gardner Bender B351S One-Shot Eject-O-Matic Hydraulic Bender Set with 5-Inch Sweep

Gardner Bender B351S One-Shot Eject-O-Matic Hydraulic Bender Set with 5-Inch Sweep

The Gardner Bender B351S bends 1-1/4-Inch to 4-Inch rigid steel and rigid aluminum conduit in one shot and a 5-Inch sweep. You have a choice of a hand or electric pump and a durable metal job box included. You can eject conduit hydraulically by moving... more

$9,010.40

FREE shipping

go to store
Gardner Bender B306S One-Shot Hydraulic Sweep Bender, 1¼ - 4 in. Rigid Steel / Aluminum Conduit

Gardner Bender B306S One-Shot Hydraulic Sweep Bender, 1¼ - 4 in. Rigid Steel / Aluminum Conduit

The Gardner Bender B306S 1-1/4-Inch to 4-Inch Sweep/Segmental Rigid Hydraulic Bender will bend 1-1/4-Inch to 4-Inch sweep/segmental rigid steel or rigid aluminum conduit. You have a choice oh a hand, or electric pump and the bender has the ability to... more

$7,152.92

go to store
Gardner Bender BH-125 Hand Bender Handle, 1¼ Inch NPT by 54 Inch Long, For Electrical Conduit Hand Bending Tools 933/923, Pre-Threaded Handle, Red

Gardner Bender BH-125 Hand Bender Handle, 1¼ Inch NPT by 54 Inch Long, For Electrical Conduit Hand Bending Tools 933/923, Pre-Threaded Handle, Red

Hand bender handle, 1¼ inch NPT x 54 inch. Long, pk.. cast-in markings for accurate head-down and head-up bending as well as for producing stub-ups, offsets, saddles and back to back bends. Enlarged foot pedals and increased Toe room to ensure greater... more

$52.37

FREE shipping

go to store
Gardner Bender 820 1/2 in. Rigid Hickey Hand Bender Head

Gardner Bender 820 1/2 in. Rigid Hickey Hand Bender Head

These lightweight and extremely durable bending heads are ideal for the experienced bender. Basic bender gets the job done without a lot of frills or expense and is built to last. Manufactured using permanent mold process with high-strength,... more

$43.78

FREE shipping

go to store
Gardner Bender 962 BigBen Aluminum Conduit Hand Bender Head, 1 inch EMT and ¾ inch Rigid IMC, Industry Standard Measurements, Fits (BH-75) Handle

Gardner Bender 962 BigBen Aluminum Conduit Hand Bender Head, 1 inch EMT and ¾ inch Rigid IMC, Industry Standard Measurements, Fits (BH-75) Handle

Gardner Bender’s Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40%, highlighting the marking and incorporating a dual sight-line... more

$33.55

go to store
Gardner Bender 960 BigBen Aluminum Conduit Hand Bender Head 0.5"

Gardner Bender 960 BigBen Aluminum Conduit Hand Bender Head 0.5"

Gardner Bender’s Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40%, highlighting the marking and incorporating a dual sight-line... more

$20.41

go to store
Greenlee 843F Site Rite Iron Hand Bender Head for 1-1/4-Inch EMT and 1-Inch Rigid Bender

Greenlee 843F Site Rite Iron Hand Bender Head for 1-1/4-Inch EMT and 1-Inch Rigid Bender

Greenlee 843F Specifications: Capacity: 1 1/4 EMT, 1 Rigid/IMCGreenlee 843F Features: Superior, patented Site Rite sighting system featuring cast in, readable markings on the bender heads and a finish that provides for the best visibility in low light.... more

$162.32

FREE shipping

go to store
Gardner Bender 931H Aluminum Conduit Hand Bender and Handle (BH-75), ¾" EMT and ½" Rigid Electrical Conduit

Gardner Bender 931H Aluminum Conduit Hand Bender and Handle (BH-75), ¾" EMT and ½" Rigid Electrical Conduit

Gardner EMT/Rigid Aluminum Hand Bender bends 1/2" to 1-1/4" EMT, and 1/2" to 1" rigid and rigid aluminum conduit. The built-in acrylic level gauge helps make precise bends in half the time. Includes embossed sight lines for 10°, 22.5°, 30°, 45°, 60°... more

$69.97

FREE shipping

go to store
Gardner Bender 962H Big Ben Hand Bender with Head and Steel Handle, Aluminum, 5.81" Radius, 1" EMT and 3/4" Rigid Bending Capacity, (Box of 2)

Gardner Bender 962H Big Ben Hand Bender with Head and Steel Handle, Aluminum, 5.81" Radius, 1" EMT and 3/4" Rigid Bending Capacity, (Box of 2)

Gardner Bender’s Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40%, highlighting the marking and incorporating a dual sight-line... more

$85.82

FREE shipping

go to store
Greenlee 84H3 Site Rite Bender Handle For 1-1/4" Aluminum or Iron Hand Bender Heads

Greenlee 84H3 Site Rite Bender Handle For 1-1/4" Aluminum or Iron Hand Bender Heads

Greenlee 84H3 Specifications: Fits Bender Head Size: 1-1/4"Greenlee 84H3 Features: For aluminum or iron hand bender heads Larger straight grip area for improved comfort and leverage Durable powder coating more

$50.22

FREE shipping

go to store
Gardner Bender 961 BigBen Aluminum Conduit Hand Bender Head, ¾ inch EMT and ½ inch Rigid, Industry Standard Measurements, Fits (BH-75) Handle

Gardner Bender 961 BigBen Aluminum Conduit Hand Bender Head, ¾ inch EMT and ½ inch Rigid, Industry Standard Measurements, Fits (BH-75) Handle

Gardner Bender’s Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40%, highlighting the marking and incorporating a dual sight-line... more

$32.36

go to store
Gardner Bender 821 3/4 in. Rigid Hickey Hand Bender Head

Gardner Bender 821 3/4 in. Rigid Hickey Hand Bender Head

These lightweight and extremely durable bending heads are ideal for the experienced bender. Basic bender gets the job done without a lot of frills or expense and is built to last. Manufactured using permanent mold process with high-strength,... more

$47.08

FREE shipping

go to store
Gardner Bender 960H BigBen Aluminum Conduit Hand Bender Head and Handle (BH-75), ½ inch EMT, Industry Standard Measurements, 2 Pc

Gardner Bender 960H BigBen Aluminum Conduit Hand Bender Head and Handle (BH-75), ½ inch EMT, Industry Standard Measurements, 2 Pc

Gardner Bender’s Big Ben aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5x durability factor, increasing the foot pedal size and clearance by 40%, highlighting the marking and incorporating a dual sight-line... more

$42.67

FREE shipping

go to store
Gardner Bender 930H Aluminum Conduit Hand Bender and Handle (BH-75), ½" EMT Electrical Conduit

Gardner Bender 930H Aluminum Conduit Hand Bender and Handle (BH-75), ½" EMT Electrical Conduit

Gardner EMT Aluminum Hand Bender Bends 1/2" EMT conduit. The built-in acrylic level gauge helps make precise bends in half the time. Includes embossed sight lines for 10°, 22.5°, 30°, 45°, 60° and 90° bends. Patented Vise-Mate holds conduit steady as... more

$60.34

FREE shipping

go to store
Malco MS12 12-Inch Hand Held Magnetic Sweep

Malco MS12 12-Inch Hand Held Magnetic Sweep

Malco MS12 Hand held 12" Magnetic Sweep. Comfortable angled handle grip projects magnet forward and to the side of user for handy reach into confined areas yet keeps entire magnetic surface close to ground for efficiently picking up metal debris.... more

$101.34

FREE shipping

go to store
Malco S3R Offset Hand Seamer

Malco S3R Offset Hand Seamer

3-Inch Offset Hand Seamer Soft Touch with Unique One-Hand operation Latch. Opening Maximizes Handle Leverage. more

$68.57

FREE shipping

go to store
Malco 2IN1 Hand Riveter

Malco 2IN1 Hand Riveter

One hand operation with normal squeezing action provides enough pulling power to set all popular size rivets. 2-in-1 adjustment features a single long stroke for most hand riveting applications and a short "ratchet action" power stroke for setting... more

$79.63

FREE shipping

go to store
Malco CONNEXT4 Magnetic Hex Hand Driver Kit, Black case, 9-Piece

Malco CONNEXT4 Magnetic Hex Hand Driver Kit, Black case, 9-Piece

Whole Kits of possibilities feature popular assortments of handles and hollow or magnetic hex chuck driver shafts in a tough Cordura Pouch with belt clip and Velcro closure. 9 piece kit includes: 3-each ¼-inch, and 5/16-inch driver shafts in short,... more

$56.89

FREE shipping

go to store
Malco HHD3T 3/8-Inch Connext Magnetic Stubby Hand Driver

Malco HHD3T 3/8-Inch Connext Magnetic Stubby Hand Driver

CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Magnetic Hex Chuck Driver shaft components, offer the ultimate in Hex Hand Driver durability and flexibility. Hex Hand Drivers shown here are sold pre-assembled and... more

$17.50

go to store
Malco FCC5 Fiber Cement Backer Board Hand Nibbler

Malco FCC5 Fiber Cement Backer Board Hand Nibbler

Compact tool offers exceptional operator control for straight, left or right cuts in 1/2-inch, (13 mm) fiber cement backer board. Ideal for making precise trim cuts and round or square pattern cuts to accommodate curves, corners and utility outlet... more

$70.97

FREE shipping

go to store
Malco FCC3 Fiber Cement Siding Hand Nibbler

Malco FCC3 Fiber Cement Siding Hand Nibbler

Cuts 5/16-inch (8 mm) fiber cement siding plank cleanly, without distortion or blowout. Makes fine, precise trim cuts and rounded cuts with ease. Anti-slip blade profile offers exceptional operator control. more

$70.97

FREE shipping

go to store

More information about Hand Tools

Best prices on Malco hand bender in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.