Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Dowel Pin (0.2495)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Dowel Pin (0.2495)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$53.60

FREE shipping

go to store
Grace Usa Screwdriver Set - G3 Screwdriver, .160" Wide, .031" Thick, 5.5" Long

Grace Usa Screwdriver Set - G3 Screwdriver, .160" Wide, .031" Thick, 5.5" Long

Made from keystone hardened tool steel. Sides of bit tip are made parallel for short distance toward shank for better -- more consistent fit to help prevent mars and dings in and around the screw slot. Features square shank; hardened tips; square,... more

$6.99

go to store
Grace Usa Screwdriver Set - N2 Screwdriver, .300" Wide, .037" Thick, 4" Long

Grace Usa Screwdriver Set - N2 Screwdriver, .300" Wide, .037" Thick, 4" Long

Made from keystone hardened tool steel. Sides of bit tip are made parallel for short distance toward shank for better -- more consistent fit to help prevent mars and dings in and around the screw slot. Features square shank; hardened tips; square,... more

$6.99

go to store
Grace Usa Screwdriver Set - H3 Screwdriver, .190" Wide, .038" Thick, 7.5" Long

Grace Usa Screwdriver Set - H3 Screwdriver, .190" Wide, .038" Thick, 7.5" Long

Made from keystone hardened tool steel. Sides of bit tip are made parallel for short distance toward shank for better -- more consistent fit to help prevent mars and dings in and around the screw slot. Features square shank; hardened tips; square,... more

$6.99

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Dowel Pin (0.2480)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Dowel Pin (0.2480)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$53.60

FREE shipping

go to store
F&D Tool Company 29167 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 21/32" Cutter Diameter, 3/8" Point Diameter, 4" Flute Length, 1/2" Shank Diameter, 6 3/8" Overall Length, 5 Teeth

F&D Tool Company 29167 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 21/32" Cutter Diameter, 3/8" Point Diameter, 4" Flute Length, 1/2" Shank Diameter, 6 3/8" Overall Length, 5 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$106.21

FREE shipping

go to store
F&D Tool Company 29163 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 7/16" Cutter Diameter, 1/4" Point Diameter, 3 1/2" Flute Length, 1/2" Shank Diameter, 5 3/8" Overall Length, 5 Teeth

F&D Tool Company 29163 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 7/16" Cutter Diameter, 1/4" Point Diameter, 3 1/2" Flute Length, 1/2" Shank Diameter, 5 3/8" Overall Length, 5 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$74.17

FREE shipping

go to store
F&D Tool Company 29173 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 15/16" Cutter Diameter, 9/16" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

F&D Tool Company 29173 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 15/16" Cutter Diameter, 9/16" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$26.83

go to store
F&D Tool Company 29169 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 3/4" Cutter Diameter, 13/32" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

F&D Tool Company 29169 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 3/4" Cutter Diameter, 13/32" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$102.21

FREE shipping

go to store
F&D Tool Company 29171 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 13/16" Cutter Diameter, 7/16" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

F&D Tool Company 29171 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 13/16" Cutter Diameter, 7/16" Point Diameter, 5" Flute Length, 1/2" Shank Diameter, 6 7/8" Overall Length, 5 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$126.70

FREE shipping

go to store
F&D Tool Company 29161 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 5/16" Cutter Diameter, 3/16" Point Diameter, 2 3/4" Flute Length, 3/8" Shank Diameter, 4 5/8" Overall Length, 4 Teeth

F&D Tool Company 29161 Bridge Reamers, Short Straight Shank, Left Hand Spiral, Right Hand Cut, High Speed Steel, 5/16" Cutter Diameter, 3/16" Point Diameter, 2 3/4" Flute Length, 3/8" Shank Diameter, 4 5/8" Overall Length, 4 Teeth

Used to align bolt or rivet holes in bridge or structural iron work and boiler plates. more

$54.95

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #50 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #50 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$25.40

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 25/64 Inch

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 25/64 Inch

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$88.03

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #26 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #26 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$34.50

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #63 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #63 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$37.80

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #27 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #27 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$11.86

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #45 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #45 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$23.62

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 3/16 Inch Dowel Pin (0.1870)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 3/16 Inch Dowel Pin (0.1870)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$39.30

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #59 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #59 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$34.20

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 Inch Dowel Pin (0.3105)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 Inch Dowel Pin (0.3105)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$11.07

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: W

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: W

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$13.26

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #67 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #67 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$37.80

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #6 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #6 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$46.30

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 7/16 Inch Oversize

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 7/16 Inch Oversize

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$101.20

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 11 mm

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 11 mm

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$13.49

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #70 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #70 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$7.48

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 10 mm

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 10 mm

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$95.30

FREE shipping

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #28 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #28 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$33.90

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 3/16 Inch (0.1875)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 3/16 Inch (0.1875)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$30.24

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #40 Wire Size

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #40 Wire Size

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$27.50

go to store
Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: C

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: C

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms... more

$9.73

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #4

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #4

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$29.65

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 1/8" Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 1/8" Size

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$16.65

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 13/64" Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 13/64" Size

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$28.62

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #11

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #11

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$27.60

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #9

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #9

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$29.15

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #3

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #3

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$10.78

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 7/16" Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 7/16" Size

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$71.77

FREE shipping

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 15/32" Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 15/32" Size

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$12.78

go to store
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #16

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Conventional Point, Size #16

The Chicago-Latrobe 769 series straight-flute drill bit is made from carbide with an uncoated (bright) finish and has a 140-degree 4-facet point to penetrate without a pilot hole and reduce clogging on cast iron, and non-ferrous and hardened materials.... more

$6.98

go to store

More information about Hand Tools

Best prices on Mens short shank in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.