Uxcell Length Lathes Tailstock Woodturning Tool Morse Taper Dead Center, 115mm

Uxcell Length Lathes Tailstock Woodturning Tool Morse Taper Dead Center, 115mm

The Morse Taper dead Center is mainly used in drilling machine and lathe machine.Support the tailstock end of your workpiece with this hardened and ground dead center. Alloy material, this dead center requires lubrication. more

$6.82

go to store
Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64" to 1" in 1/64" Increments

Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64" to 1" in 1/64" Increments

The Huot Drill Bit Index holds Morse taper or taper length drill bits with a straight shank in sizes 49/64" to 1" in 1/64" increments and is made in USA. The labeled storage holes provide quick identification and organization. The index is made of... more

$66.64

go to store
South Bend Lathe SB1358 Morse Taper Sleeve, MT No.2 / MT No.1

South Bend Lathe SB1358 Morse Taper Sleeve, MT No.2 / MT No.1

Total indicated runout is from 0.00059-Inch to 0.00079-Inch Concentricity is ground into each and every one of these sleeves Minimal deviation in concentricity, Manufacturer: South Bend Lathe more

$6.98

go to store
Morse Cutting Tools 84889 Taper Pipe Taps, High Speed Steel, Bright Finish, 4 Flutes, 1/4" - 18 Size

Morse Cutting Tools 84889 Taper Pipe Taps, High Speed Steel, Bright Finish, 4 Flutes, 1/4" - 18 Size

NPT taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal. Interrupted Thread taper pipe tap reduce friction, increase chip... more

$20.04

go to store
Morse Cutting Tools 36025 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPTF Interrupted Thread, 5 Flutes, 1/2"-14" Size

Morse Cutting Tools 36025 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPTF Interrupted Thread, 5 Flutes, 1/2"-14" Size

NPTF Dry seal taper pipe taps produce threads where a tight seal is achieved during assembly by metal-to-metal contact. Used for applications requiring a tight seal without the use of thread sealants. more

$50.26

go to store
Milescraft MaxiCut RotaStop 10 mm Morse Taper #3

Milescraft MaxiCut RotaStop 10 mm Morse Taper #3

Free Shipping on Over 500K Items!

RotaStop is a unique toolless locking shank system that eliminates the risk of rotation in the chuck. RotaStop automatically locks into any chuck and eliminates the possibility of rotation, which can lead to damage on the shank. more

$39.99

go to store
Irwin Industrial Tool Wire Gauge Carbon Taps - Taper Tap, 10-24, 25, 13/64

Irwin Industrial Tool Wire Gauge Carbon Taps - Taper Tap, 10-24, 25, 13/64

If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Irwin Industrial Tool Co. SPECS: Those taps marked ** are... more

$2.79

go to store
Alvord Polk 163-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Taper Shank, Uncoated Finish, Morse Taper Size 2

Alvord Polk 163-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Taper Shank, Uncoated Finish, Morse Taper Size 2

The Alvord Polk 163-0 straight flute reamer is a taper shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for finish reaming Morse taper sockets. Morse taper is one of the most widely used standards for... more

$83.56

go to store

More information about Hand Tools

Best prices on Morse taper in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.