Irwin Industrial Tool Wire Gauge Carbon Taps - Taper Tap, 3-48, 47, 36

Irwin Industrial Tool Wire Gauge Carbon Taps - Taper Tap, 3-48, 47, 36

If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Irwin Industrial Tool Co. SPECS: Those taps marked ** are... more

$4.99

go to store
Starrett 224MGRLZ Interchangeable Anvil Micrometer, Ratchet Stop, Lock Nut, 150-300mm Range, 0.01mm Graduation

Starrett 224MGRLZ Interchangeable Anvil Micrometer, Ratchet Stop, Lock Nut, 150-300mm Range, 0.01mm Graduation

The Starrett 224M series interchangeable anvil micrometer includes a set of interchangeable anvils to provide a full range of measurement in steps of 25mm. It has a vernier scale in metric units for taking precise outside diameter (OD) measurements,... more

$712.42

FREE shipping

go to store
Irwin Industrial Tool Fractional Carbon Taps - Taper Tap, 5/16-18, F, 21/64*

Irwin Industrial Tool Fractional Carbon Taps - Taper Tap, 5/16-18, F, 21/64*

We supply our taps in Carbon steel whenever possible. If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Irwin... more

$4.99

go to store
Starrett Tap Wrenches - #93 T-Handle Tap Wrench

Starrett Tap Wrenches - #93 T-Handle Tap Wrench

Precision-made tap wrenches help you apply the exact amount of leverage needed to cut straight, true threads for scope bases, finish ream chambers, and drill or deburr holes. Easy-to-grasp, knurled collet tightens securely around the tap, reamer, or... more

$36.99

go to store
Starrett 6' Electronic Caliper - Starrett 6 Electronic Caliper

Starrett 6' Electronic Caliper - Starrett 6 Electronic Caliper

6" electronic calipers are lightweight, ergonomic, smooth and simple to operate Shift from inches to millimeters on the fly, shut off automatically after 5 minutes of non use but retain the last measurement taken Perfect for reloading because they are... more

$169.99

FREE shipping

go to store
Brownells High Speed Steel Taps - Taper Tap, 6-48, 31, 25

Brownells High Speed Steel Taps - Taper Tap, 6-48, 31, 25

We supply our taps in Carbon steel whenever possible. If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Brownells more

$9.16

go to store
Starrett SM66ME Adhesive Tape Measure, 3/4" Width, 6' Length

Starrett SM66ME Adhesive Tape Measure, 3/4" Width, 6' Length

Steel precision tape measure that sticks to almost any surface. Lies flat, cuts to size with scissors. Useful on a work bench, butcher block, drafting table, radial arm saw.. Whenever repetitive measurements are required. more

$6.51

go to store
Klein Tools 3261 8-Inch Barrel-Type Drift Pin,13/16-Inch

Klein Tools 3261 8-Inch Barrel-Type Drift Pin,13/16-Inch

High-quality, forged, alloy steel drift pins ensure excellent performance. Tapers are uniform and blend into body diameter. Drift pins are heat-treated for extra strength. Black finish provides extra rust resistance. Tool Type: Drift Pin Length: 8quot;... more

$7.34

go to store
Grace USA Roll Pin Punch Set 7-Piece Steel

Grace USA Roll Pin Punch Set 7-Piece Steel

Steel punches will cover a majority of a gunsmiths needs. Pin punches have a reverse taper which helps to eliminate the punch from sticking. All heads and tapers are fully polished and stock is satin finished for a positive grip. Made in the U.S.A.... more

$32.99

go to store

MidwayUSA

(950,000+)
Starrett 98-8 8" Precision Machinists' Level with Main and Cross-Test Vials

Starrett 98-8 8" Precision Machinists' Level with Main and Cross-Test Vials

The Starrett 98-8 precision machinists’ level is an 8" long spirit level with a graduated main vial that has a sensitivity of 0.42 mm/m or 80 to 90 seconds for determining horizontal plane and a cross-test vial that enables simultaneous leveling in two... more

$143.32

FREE shipping

go to store
Starrett T2XRL Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 1-2" Range, 0.0001" Graduation, +/-0.00005" Accuracy

Starrett T2XRL Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 1-2" Range, 0.0001" Graduation, +/-0.00005" Accuracy

A choice of smooth friction thimble for uniform pressure or the combination ratchet and speeder for uniform pressure and quicker adjustment. Its balanced frame and thimble design insure easy handling and better readability and gracefully designed... more

$237.02

FREE shipping

go to store
Starrett Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 150" Length, 1/4" Width, 0.025" Thick, 10-14 TPI

Starrett Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 150" Length, 1/4" Width, 0.025" Thick, 10-14 TPI

The Starrett Intenss Pro-Die bimetal band saw blade has an Intenss tooth design, raker set, and a positive rake for cutting low alloy steel; aluminum; stainless steel; carbon steel; tool, die, and mold steel; steel up to C45 Rockwell hardness;... more

$60.61

FREE shipping

go to store
Starrett S38R Accessory Support Ring Set for 3811A and 3810A Hardness Tester

Starrett S38R Accessory Support Ring Set for 3811A and 3810A Hardness Tester

Support Ring Set for 3811A & 3810A. Set Consist of: 1pc Universal Stand plus the following: Concave Support Rings: 11-13mm round, 12.5-17mm round, 16.5-30mm round, 11-13mm square, 12.5-17mm square, 16.5-30 square, Convex Support Rings10-15mm round,... more

$393.00

FREE shipping

go to store
Starrett C434-12-16R 12-Inch Combination Set with Forged and Hardened Steel Square and Center Head

Starrett C434-12-16R 12-Inch Combination Set with Forged and Hardened Steel Square and Center Head

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a... more

$349.75

FREE shipping

go to store
Starrett 424 Pocket Slide Caliper, 0 to 3.5" Range, 0.03125" Graduations, Stainless Steel, Nib Style Jaw

Starrett 424 Pocket Slide Caliper, 0 to 3.5" Range, 0.03125" Graduations, Stainless Steel, Nib Style Jaw

The Starrett 424 pocket slide caliper has a 0 to 3.5" measuring range with 0.03125" graduations for gaging wire and drill rod. The 1.375" jaw depth tests United States Steel Wire Gage sizes 0 through 36 and decimal equivalents are engraved on the gauge... more

$210.00

FREE shipping

go to store
Starrett 436.1MXRL-150 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 125-150mm Range, 0.01mm Graduation, +/-0.004mm Accuracy

Starrett 436.1MXRL-150 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 125-150mm Range, 0.01mm Graduation, +/-0.004mm Accuracy

The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform... more

$222.02

FREE shipping

go to store
Starrett 724LZ-36 Tubular Bow Type Micrometer, Interchangeable Anvils, Plain Thimble, Lock Nut, 30-36" Range, 0.001" Graduation

Starrett 724LZ-36 Tubular Bow Type Micrometer, Interchangeable Anvils, Plain Thimble, Lock Nut, 30-36" Range, 0.001" Graduation

The Starrett 436 series outside micrometer has a bow-type shape for measurement of large outside dimensions, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and includes interchangeable anvils for a diversified... more

$1,997.00

FREE shipping

go to store
Starrett HT-2500-105 Replacement Impact Body for 3811A and 3810A Hardness Tester

Starrett HT-2500-105 Replacement Impact Body for 3811A and 3810A Hardness Tester

Replacement Impact Body For D Impact Device more

$224.00

FREE shipping

go to store
Starrett 795.1XRL-2 LCD Electronic Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 1"-2" Range, 0.00005" Resolution, +/-0.0001" Accuracy

Starrett 795.1XRL-2 LCD Electronic Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 1"-2" Range, 0.00005" Resolution, +/-0.0001" Accuracy

The Starrett 795.1 electronic micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 795.1 includes an RS237 output port for data transmission and works well... more

$294.00

FREE shipping

go to store
Starrett 117D Center Punch With Round Shank, 4" Length, 5/32" Tapered Point Diameter

Starrett 117D Center Punch With Round Shank, 4" Length, 5/32" Tapered Point Diameter

The Starrett 117D center punch with round shank is 4" long and has a 5/32" (4 mm) diameter tapered point. The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Center... more

$9.11

go to store
Starrett 57D Full-Sized Surface Gauge with Cast Iron Base, 12" and 18" Spindle Length, Base 3-3/4" Length and 3-3/8" Width

Starrett 57D Full-Sized Surface Gauge with Cast Iron Base, 12" and 18" Spindle Length, Base 3-3/4" Length and 3-3/8" Width

Starrett 57D SURFACE GAGE- 12" & 18" SPINDLES more

$251.00

FREE shipping

go to store
Starrett 84MZ-181-7J Dial Bore Gauge, 203.2-308mm Range, 0.01mm Graduation

Starrett 84MZ-181-7J Dial Bore Gauge, 203.2-308mm Range, 0.01mm Graduation

The Starrett 84MZ-181-7J Dial Bore Gauge has a measurement range of 203.2 to 308 mm and gradient spacing of 0.01 mm. Two centralizing plungers provide accurate tool alignment within the bore. This direct-measuring gauge uses a two-point contact system... more

$1,446.00

FREE shipping

go to store
Starrett 56C Small Surface Gauge with Hardened Steel Base, 7" Spindle Length, Base 2" Length and 1-1/2" Width

Starrett 56C Small Surface Gauge with Hardened Steel Base, 7" Spindle Length, Base 2" Length and 1-1/2" Width

Starrett 56C SMALL SURFACE GAGE- 7" SPINDLE more

$267.04

FREE shipping

go to store
Starrett SB565Z Brass Drive Pin Punches Set, 8 Pieces

Starrett SB565Z Brass Drive Pin Punches Set, 8 Pieces

The Starrett SB565Z is an eight-piece brass drive pin punch set to drive pins into or out of a work piece. The set is in a fabric case, and includes pin punches with the following diameters: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16".... more

$52.00

FREE shipping

go to store
Starrett Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 78" Length, 1/2" Width, 0.025" Thick, 10-14 TPI

Starrett Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 78" Length, 1/2" Width, 0.025" Thick, 10-14 TPI

The Starrett Intenss Pro-Die bimetal band saw blade has an Intenss tooth design, raker set, and a positive rake for cutting low alloy steel; aluminum; stainless steel; carbon steel; tool, die, and mold steel; steel up to C45 Rockwell hardness;... more

$25.89

go to store
Starrett 12527 Dial Test Indicator with Dovetail Mount and 2 Attachments, White Dial, 1.57" Diameter, 0.030" Graduation Range, 0.0005" Graduation

Starrett 12527 Dial Test Indicator with Dovetail Mount and 2 Attachments, White Dial, 1.57" Diameter, 0.030" Graduation Range, 0.0005" Graduation

The Starrett 3909 precise, high quality test indicator offers a full complement of standard features. Indicator includes two dovetail clamps and case. more

$109.00

FREE shipping

go to store
Starrett F2730-1AD AD Electronic Indicator, 1" (25 mm) Range, 0.0001" Reading

Starrett F2730-1AD AD Electronic Indicator, 1" (25 mm) Range, 0.0001" Reading

All indicators feature a glass scale design with an unsurpassed accuracy of ± two resolutions when measuring from a known standard. Rugged, sealed enclosures as standard. American designed and manufactured. more

$520.00

FREE shipping

go to store
Starrett S770BXTLZ Electronic Internal Bore Micrometer Set, 3-Point Contact (6-8" (150-200mm) Range), Built-In Bluetooth, 0.00005" / 0.001mm Resolution

Starrett S770BXTLZ Electronic Internal Bore Micrometer Set, 3-Point Contact (6-8" (150-200mm) Range), Built-In Bluetooth, 0.00005" / 0.001mm Resolution

Starrett S770BXTLZ electronic internal micrometer set, 3-point contact (6-8" (150-200mm) range) and built-in Bluetooth. The Starrett 770Bxt Series electronic internal micrometer, with built-in Blue tooth technology, provides IP67 coolant, water, dirt... more

$4,449.36

FREE shipping

go to store
Starrett 578 Hardened Steel V-Block And Clamp For Larger Capacity Work

Starrett 578 Hardened Steel V-Block And Clamp For Larger Capacity Work

Largest capacity V-block, which is ideal for toolroom, inspection and production work. Two tapped holes (3/8 x 16) in one end for mounting the V-blocks perpendicular to faceplates. more

$787.00

FREE shipping

go to store
Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter

Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter

The Starrett 117AA center punch with round shank is 3" long and has a 1/16" (1.5 mm) diameter tapered point. The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Center... more

$9.11

go to store
Starrett 185 Time-Saver Tap and Drill Gage, 2-56 to 1/4-28 Tap Size Range

Starrett 185 Time-Saver Tap and Drill Gage, 2-56 to 1/4-28 Tap Size Range

Starrett 185 TAP & DRILL GAGE more

$64.98

FREE shipping

go to store
Starrett 216FL-4 Digital Outside Micrometer, Friction Thimble, Lock Nut, 3-4" Range, 0.001" Graduation, +/-0.00015" Accuracy

Starrett 216FL-4 Digital Outside Micrometer, Friction Thimble, Lock Nut, 3-4" Range, 0.001" Graduation, +/-0.00015" Accuracy

The Starrett 216FL series outside micrometer has a mechanical digit counter for ease of reading to 0.001”, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The... more

$389.00

FREE shipping

go to store
Starrett 1010EZ Dial Indicator Pocket Gage, 0.25" Stem Dia., White Dial, 0-50 Reading, 0-0.375" Range, 0.0005" Graduation

Starrett 1010EZ Dial Indicator Pocket Gage, 0.25" Stem Dia., White Dial, 0-50 Reading, 0-0.375" Range, 0.0005" Graduation

Handy pocket gauge is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" thick. The gauge fits naturally into the curve between the thumb and index finger. A... more

$343.00

FREE shipping

go to store
Starrett 209MRL Can Curl Micrometer, Ratchet Stop, Lock Nut, 0-12.5mm Range, 0.001mm Graduation

Starrett 209MRL Can Curl Micrometer, Ratchet Stop, Lock Nut, 0-12.5mm Range, 0.001mm Graduation

This Micrometer is a special rest foot and finger ring for consistent measurement of the curl thickness on aerosol cans with 25mm diameter domed tops. Combination ratchet and speeder for uniform pressure and quicker adjustment. Finger ring for ease of... more

$588.00

FREE shipping

go to store
Starrett 660 Base Indicator Holder With Triple-Jointed Arm

Starrett 660 Base Indicator Holder With Triple-Jointed Arm

The compact and versatile 660 magnetic base indicator holder has three adjustable pivots controlled by a single knob for fast, easy indicator positioning. Small but powerful magnetic base, with 70 lbs. (320 N) holding force, positive on/off switch.... more

$100.01

FREE shipping

go to store
Starrett 436.1RL-3 Outside Micrometer, Ratchet Stop, Lock Nut, 2-3" Range, 0.001" Graduation, +/-0.0001" Accuracy

Starrett 436.1RL-3 Outside Micrometer, Ratchet Stop, Lock Nut, 2-3" Range, 0.001" Graduation, +/-0.0001" Accuracy

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform... more

$188.21

FREE shipping

go to store
Starrett 57C Full-Sized Surface Gauge with Cast Iron Base, 12" Spindle Length, Base 3-3/4" Length and 3-3/8" Width

Starrett 57C Full-Sized Surface Gauge with Cast Iron Base, 12" Spindle Length, Base 3-3/4" Length and 3-3/8" Width

Starrett 57C SURFACE GAGE- 12" SPINDLE more

$225.46

FREE shipping

go to store
Starrett 667-4 Thickness Gage or "Feeler" Stock

Starrett 667-4 Thickness Gage or "Feeler" Stock

These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. more

$2.64

go to store
Starrett 81-211J Dial Indicator

Starrett 81-211J Dial Indicator

The Starrett 81 Series Dial Indicator has a shockless, hardened steel gear train and jewel bearings. It is furnished with a lug-on-center back. Antimagnetic and special non-shock mechanisms are options available for all models. more

$210.56

FREE shipping

go to store
Starrett T444.1XRL-6 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 0.0001" Grad

Starrett T444.1XRL-6 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 0.0001" Grad

T444.1XRL-6 Outside Micrometer .0001" Grad, 0-6" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett T444 Series have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and... more

$188.00

FREE shipping

go to store

More information about Hand Tools

Best prices on Starrett taper in Hand Tools online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.