Best Seller
Forney 49470 Angle in A36 Mild Carbon Steel Alloy, 1/2" x 1/2" x 1/8" x 3'

Forney 49470 Angle in A36 Mild Carbon Steel Alloy, 1/2" x 1/2" x 1/8" x 3'

The Forney 49470 angle, 1/2-inch(12.7 mm)-by-1/2-inch(12.7 mm)-by-1/8-inch(3.18 mm)-by-3-feet(.92 m) A36 mild carbon steel alloy. Common structural steel in a.s.a.p. Minimum yield of 36,000 psi (250 mpa) and ultimate tensile strength of 58,000 to... more

$15.53

go to store
Forney 49544 16 Gauge Round Tubing in A36 Mild Carbon Steel Alloy, 1-1/2" x 3'

Forney 49544 16 Gauge Round Tubing in A36 Mild Carbon Steel Alloy, 1-1/2" x 3'

The Forney 49544 round tubing, 16 gauge 1-1/2-inch(38.1 mm)-by-3-feet(.92 m) A36 mild carbon steel alloy with 16 gauge walls. Common structural steel in a.s.a.p. Minimum yield of 36,000 psi (250 mpa) and ultimate tensile strength of 58,000 to 80,000... more

$24.90

go to store
Best Seller
Forney 49497 Angle in A36 Mild Carbon Steel Alloy, 2" x 2" x 1/4" x 3'

Forney 49497 Angle in A36 Mild Carbon Steel Alloy, 2" x 2" x 1/4" x 3'

The Forney 49497 angle, 2-inch(50.8 mm)-by-2-inch(50.8 mm)-by-1/4-inch(6.35 mm)-by-3-feet(.92 m) A36 mild carbon steel alloy. Common structural steel in a.s.a.p. Minimum yield of 36,000 psi (250 mpa) and ultimate tensile strength of 58,000 to 80,000... more

$31.99

go to store
1/2"-20 x 3' Yellow Zinc B7 Alloy Steel Threaded Rod FABORY U22171.050.3600

1/2"-20 x 3' Yellow Zinc B7 Alloy Steel Threaded Rod FABORY U22171.050.3600

Threaded rods are longer than threaded studs or double end threaded studs. Here is some additional information about Fabory Threaded Rod. Overall Length: 3 ft., Basic Material: Alloy Steel, Fastener Finish: Zinc Yellow. more

$6.71

go to store
1/2"-13 x 3' Yellow Zinc B7 Alloy Steel Threaded Rod FABORY U22182.050.3600

1/2"-13 x 3' Yellow Zinc B7 Alloy Steel Threaded Rod FABORY U22182.050.3600

Threaded Rod, System of Measurement Inch, Steel, Material Grade B7, Fastener Finish Zinc Yellow, Fastener Thread Direction Right Hand, Dia./Thread Size 1/2 In.-13, Length 3 ft., Fastener Thread Type UNC (Coarse), Color Yellow, Temp. Range (F) Not... more

$8.79

go to store
Southco E3-11-15 Series Vise Action Powder Coated Zinc Alloy Hand Operated Compression Latch with T-Handle Head, Non-Locking, 0.71" Thick, 0.45"-1.07"/2.61"-3" Grip Range, Black

Southco E3-11-15 Series Vise Action Powder Coated Zinc Alloy Hand Operated Compression Latch with T-Handle Head, Non-Locking, 0.71" Thick, 0.45"-1.07"/2.61"-3" Grip Range, Black

Southco Vise Action compression latches with gaskets. Designed for quick, secure closure in applications where vibration, sealing, and quality are paramount. The smooth operation of the Vise Action design aligns the pawl behind the frame and draws it... more

$24.99

FREE shipping

go to store
360 Brass Alloy Flat Stock,THK 1/8",W 1/2",L 1',Mill Finish,Half Hard Temper

360 Brass Alloy Flat Stock,THK 1/8",W 1/2",L 1',Mill Finish,Half Hard Temper

360 Brass Alloy Flat Stock,THK 1/8",W 1/2",L 1',Mill Finish,Half Hard Temper more

$3.67

go to store
Brass Alloy Type 360 Square Stock,THK 1/2",W 1/2",L 1',Mill Finish,Half Hard

Brass Alloy Type 360 Square Stock,THK 1/2",W 1/2",L 1',Mill Finish,Half Hard

Brass Alloy Type 360 Square Stock,THK 1/2",W 1/2",L 1',Mill Finish,Half Hard more

$12.36

go to store
Dowel Pin,Alloy Stl,3/16x1 L,Pk100 ZORO SELECT 2MB63

Dowel Pin,Alloy Stl,3/16x1 L,Pk100 ZORO SELECT 2MB63

Dowel pins are used in manufacturing to join two things together and keep them aligned while the machine is moving. Take a look at the features for Zoro Select Dowel Pin. Material: Alloy steel, Overall Length: 1", Nominal Diameter: 3/16". more

Find other Home Hardware...

Related Searches:

$14.16

go to store
Amerock Manor Egg Bp26127orb Cabinet Knob, 1-3/16 In Projection, 1-1/2 In L X 1 In W, Zinc Alloy

Amerock Manor Egg Bp26127orb Cabinet Knob, 1-3/16 In Projection, 1-1/2 In L X 1 In W, Zinc Alloy

$8.99 $7.50

go to store
Midwest 00344 High Strength Cap Screw, 1/2-13 X 3-1/2 In, Alloy Steel, Zinc Plated, Grade 5

Midwest 00344 High Strength Cap Screw, 1/2-13 X 3-1/2 In, Alloy Steel, Zinc Plated, Grade 5

$38.43 $21.15

go to store
Midwest 00303 High Strength Cap Screw, 3/8-16 X 3-1/2 In, Alloy Steel, Zinc Plated, Grade 5

Midwest 00303 High Strength Cap Screw, 3/8-16 X 3-1/2 In, Alloy Steel, Zinc Plated, Grade 5

$43.94 $23.58

go to store
Door Bottom Sweep Gold Tone Aluminum (Silver) Alloy w 1.4-inch Black PP Silicone Soft Brush 39-inch x 2.3-inch

Door Bottom Sweep Gold Tone Aluminum (Silver) Alloy w 1.4-inch Black PP Silicone Soft Brush 39-inch x 2.3-inch

Designed with aluminum alloy and PP brush 1M/39-inch length 35mm/1.4-inch height black brush is provided Seal the gap between the bottom of the door and the top of the threshold or floor surface Great changing entry door Easy to install. Screws are... more

$18.99

go to store
Door Bottom Sweep F-Shape Aluminum (Silver) Alloy Base with 2-inch Black Nylon Brush 39-inch x 3.1-inch

Door Bottom Sweep F-Shape Aluminum (Silver) Alloy Base with 2-inch Black Nylon Brush 39-inch x 3.1-inch

Aluminum Alloy base and Nylon brush more

$16.98

go to store
Columbus Mckinnon (CM) Shackle Anchor Screw Pin 7/8' Alloy Painted 9 1/2Ton (M653Ap), As Shown

Columbus Mckinnon (CM) Shackle Anchor Screw Pin 7/8' Alloy Painted 9 1/2Ton (M653Ap), As Shown

'CM® Anchor Shackle, 9.5 ton, 7/8 in, 1 in Pin Dia, Screw Pin, 3.312 in Inner Length, 2 in Inner Width, 1.438 in Opening, 2-3/8 in Eye Outer Size, Alloy Steel Body, Alloy Steel Pin, Orange Powder Coated' Color: As Shown. more

$51.07

FREE shipping

go to store
Prime-Line 9071494 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 15-Pack

Prime-Line 9071494 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 15-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

$20.31

go to store
Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack

Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

$43.46

FREE shipping

go to store
Sentry Supply 656-2887 Two Ear Wall Bracket, for 1/2 in. Panels, Zinc Alloy, Chrome Plated Finish, Pack of 3

Sentry Supply 656-2887 Two Ear Wall Bracket, for 1/2 in. Panels, Zinc Alloy, Chrome Plated Finish, Pack of 3

These wall brackets are constructed of zinc alloy (cast zamak) and they come in a chrome plated finish. They feature dual ears for greater stability, and they are designed for use with 1/2 inch thick panels. Wall brackets like these are manufactured in... more

$23.99

go to store
Forney 49485 Angle in A36 Mild Carbon Steel Alloy, 2" x 2" x 1/8" x 3'

Forney 49485 Angle in A36 Mild Carbon Steel Alloy, 2" x 2" x 1/8" x 3'

The Forney 49485 angle, 2-inch(50.8 mm)-by-2-inch(50.8 mm)-by-1/8-inch(3.18 mm)-by-3-feet(.92 m) A36 mild carbon steel alloy. Common structural steel in a.s.a.p. Minimum yield of 36,000 psi (250 mpa) and ultimate tensile strength of 58,000 to 80,000... more

$25.37

go to store
Prime-Line 9071686 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 50-Pack

Prime-Line 9071686 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 50-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

$55.92

FREE shipping

go to store
Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

$17.22

go to store
Prime-Line 9071760 Lag Shields, Long, 5/8 in. X 3-1/2 in, Zinc Alloy, 10-Pack

Prime-Line 9071760 Lag Shields, Long, 5/8 in. X 3-1/2 in, Zinc Alloy, 10-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

$45.95

FREE shipping

go to store
Forney 49500 Angle in A36 Mild Carbon Steel Alloy, 3" x 3" x 1/4" x 3'

Forney 49500 Angle in A36 Mild Carbon Steel Alloy, 3" x 3" x 1/4" x 3'

The Forney 49500 angle, 3-inch(76.2 mm)-by-3-inch(76.2 mm)-by-1/4-inch(6.35 mm)-by-3-feet(.92 m) A36 mild carbon steel alloy. Common structural steel in a.s.a.p. Minimum yield of 36,000 psi (250 mpa) and ultimate tensile strength of 58,000 to 80,000... more

$48.99

FREE shipping

go to store
360 Brass Alloy Flat Stock,THK 1/8",W 3/4",L 1',Mill Finish,Half Hard Temper

360 Brass Alloy Flat Stock,THK 1/8",W 3/4",L 1',Mill Finish,Half Hard Temper

360 Brass Alloy Flat Stock,THK 1/8",W 3/4",L 1',Mill Finish,Half Hard Temper more

$5.26

go to store
6063 Aluminum Alloy Rectangular Tubing,OD 1-3/4 x 4"," ID1-1/2 x 3-13-3/4",L 1'

6063 Aluminum Alloy Rectangular Tubing,OD 1-3/4 x 4"," ID1-1/2 x 3-13-3/4",L 1'

6063 Aluminum Alloy Rectangular Tubing,OD 1-3/4 x 4"," ID1-1/2 x 3-13-3/4",L 1' more

$12.09

go to store
4140 Flat Alloy Steel Stock, THK 3/4", W 1-1/2", L 1', Cold FIN, THK TOL -0.009"

4140 Flat Alloy Steel Stock, THK 3/4", W 1-1/2", L 1', Cold FIN, THK TOL -0.009"

4140 Flat Alloy Steel Stock, THK 3/4", W 1-1/2", L 1', Cold FIN, THK TOL -0.009" more

$91.79

FREE shipping

go to store
3/4" Shackle Alloy Swivel Eye Hoist Hook with Safety Spring Latch (4-1/2 Ton)

3/4" Shackle Alloy Swivel Eye Hoist Hook with Safety Spring Latch (4-1/2 Ton)

Overall Length: 9-1/2"Shackle Diameter: 3/4"Throat Opening: 1-1/2"Safe Working Load: 4-1/2 Tons (9,000 lbs.)Material: Drop Forged Alloy SteelHook Style: SlipDesigned To Be Used For Overhead Lifting ApplicationsSafety Spring Latch Ensures Load Stays On... more

$77.50

go to store
1 1/2-12 x 3 1/2 Socket Cap Screw Alloy (10)

1 1/2-12 x 3 1/2 Socket Cap Screw Alloy (10)

1 1/2-12 x 3 1/2 Socket Cap Screw AlloyAlloy Socket Head Cap Screws from Brighton Best. Hardness of RC 38-43, meets or exceeds ASTM A574. Manufactured from heat treated alloy steel, 1960 series. more

$1,403.00

FREE shipping

go to store
2-4 1/2 x 3 1/2 Socket Cap Screw Alloy (10)

2-4 1/2 x 3 1/2 Socket Cap Screw Alloy (10)

2-4 1/2 x 3 1/2 Socket Cap Screw AlloyAlloy Socket Head Cap Screws from Brighton Best. Hardness of RC 38-43, meets or exceeds ASTM A574. Manufactured from heat treated alloy steel, 1960 series. more

$4,595.50

FREE shipping

go to store
6063 Aluminum Alloy Square Tubing, OD 3/4", ID 1/2", L 3', MF, T52 Temper

6063 Aluminum Alloy Square Tubing, OD 3/4", ID 1/2", L 3', MF, T52 Temper

6063 Aluminum Alloy Square Tubing, OD 3/4", ID 1/2", L 3', MF, T52 Temper more

$8.58

go to store
3/4-10 x 1 1/2 Socket Set Screw Cup Point Alloy (50)

3/4-10 x 1 1/2 Socket Set Screw Cup Point Alloy (50)

3/4-10 x 1 1/2 Socket Set Screw Cup Point AlloyA headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent... more

$237.00

FREE shipping

go to store
Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 2)

Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 2)

For lifting or pulling. Snap-in design for fast efficient installation. One piece design in ABS low gloss black. more

$18.55

FREE shipping

go to store
Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 6)

Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 6)

Southco 96 - Removable Lift-Off Hinges, Glossary with Standard Finishes and Performance Guidelines. more

$28.00

FREE shipping

go to store
Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 8)

Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 8)

Southco 96 - Removable Lift-Off Hinges, Glossary with Standard Finishes and Performance Guidelines. more

$40.00

FREE shipping

go to store
Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 8)

Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 8)

For lifting or pulling. Snap-in design for fast efficient installation. One piece design in ABS low gloss black. more

$30.11

FREE shipping

go to store
KERR LAKESIDE SHCS,Alloy Steel,3/8"-16x2-1/2",PK50 37C250KCS

KERR LAKESIDE SHCS,Alloy Steel,3/8"-16x2-1/2",PK50 37C250KCS

Zoro offers socket head cap screws in convenient packages of 25, 50, and 100 to meet your needs. Take a look at the features for Kerr Lakeside Socket Head Cap Screw. Length: 2-1/2", Screw Head Type: Cylindrical, Basic Material: Steel.FeaturesHead... more

$33.22

go to store
3.1 Inch Length Kitchen Zinc Alloy Cupboard Cabinet Door Hinges Black 2 Pcs

3.1 Inch Length Kitchen Zinc Alloy Cupboard Cabinet Door Hinges Black 2 Pcs

Package content: 2 x door hinges (Screws are not included here).Made of good quality zinc alloy material in black color, longevity, resistant corrosion, good toughness.Designed for applications with narrow mounting surfaces, such as gates, cabinets,... more

$22.99 $11.49

FREE shipping

go to store
SHCS,Alloy Steel,3/8"-24x1-1/2",PK5 MPB3393S

SHCS,Alloy Steel,3/8"-24x1-1/2",PK5 MPB3393S

Socket Head Cap Screw, System of Measurement Inch, Cylindrical, Basic Material Steel, Material Grade Alloy Steel, 3/8 In.-24, Length 1-1/2 In., Fastener Finish Chrome Plated, Fastener Thread Type UNF (Fine), Drive Type Hex Socket, Drive Size 5/16 In.,... more

$9.55

go to store
Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black

Southco E3-15-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Tubular Key Head, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black

Southco Vise Action compression latches with gaskets. Designed for quick, secure closure in applications where vibration, sealing, and quality are paramount. The smooth operation of the Vise Action design aligns the pawl behind the frame and draws it... more

$18.99

FREE shipping

go to store
Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 6)

Southco E3-19-15 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch, Non-Locking, 0.45"-1.07"/2.61"-3" Grip Range, Black (Pack of 6)

For lifting or pulling. Snap-in design for fast efficient installation. One piece design in ABS low gloss black. more

$26.45

FREE shipping

go to store

More information about Home Hardware

Best prices on 3 1 2 solid brass, Alloy in Home Hardware online. Visit Bizrate to find the best deals on top brands. Read reviews on Home & Garden merchants and buy with confidence.