Lee Gunsmith And Reloading Equipment

Lee Gunsmith And Reloading Equipment

Caliber: .300 Remington Ultra MagnumAdditional Features: Pacesetter Rifle Dies w/Shell Holder more

$41.98 $38.88

FREE shipping

go to store
RCBS Reloading Equipment Trim Pro-2 w/Spring Loaded Shell Holder 90365

RCBS Reloading Equipment Trim Pro-2 w/Spring Loaded Shell Holder 90365

RCBS Reloading Equipment Trim Pro-2 w/Spring Loaded Shell Holder 90365. RCBS Trim Pro-2 w/Spring Loaded Shell Holder 90365 more

$99.79

FREE shipping

go to store
Lee Limited Production 6.8 Remington Special Dies w/Shellholder

Lee Limited Production 6.8 Remington Special Dies w/Shellholder

Lee's limited production pacesetter dies carry the same features and quality of standard dies, but do not include a Lee factory crimp die. You'll find no better die at any other price. Half the price of competitive dies and theirs doesn't include load... more

$29

compare prices
Lee Limited Production 350 Remington Magnum Dies w/Shellholder

Lee Limited Production 350 Remington Magnum Dies w/Shellholder

Lee's limited production pacesetter dies carry the same features and quality of standard dies, but do not include a Lee factory crimp die. You'll find no better die at any other price. Half the price of competitive dies and theirs doesn't include load... more

$29

compare prices
Lee Collet Die Set w/Shellholder For 17 Remington

Lee Collet Die Set w/Shellholder For 17 Remington

A collet squeezes the case neck against a precision mandrel for perfect bullet fit with minimum run-out. Cases last ten times longer and maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. Die... more

$32

compare prices
Lee 90112 Case Length Gauge with Shell Holder, 2-Piece, 221 Remington

Lee 90112 Case Length Gauge with Shell Holder, 2-Piece, 221 Remington

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The case length gauge (pilot) and shell holder must be ordered as case length gauge and shell holder for each caliber. more

$12.08 $5.39

go to store
Lee Collet Die Set w/Shellholder For 7MM Remington Mag

Lee Collet Die Set w/Shellholder For 7MM Remington Mag

A collet squeezes the case neck against a precision mandrel for perfect bullet fit with minimum run-out. Cases last ten times longer and maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. Die... more

$29

compare prices
Mesa Tactical 6-Shell Side Saddle, 12 Gauge, Rugged, Reliable On-gun Shotshell Carriers, Fits Remington 870, Black

Mesa Tactical 6-Shell Side Saddle, 12 Gauge, Rugged, Reliable On-gun Shotshell Carriers, Fits Remington 870, Black

Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets and include high temperature adhesive-backed die-cut rubber... more

$80.00 $69.85

FREE shipping

go to store
RCBS Reloading Equipment Trim Pro-2 Power Kit w/Spring Loaded Shell Holder 90367

RCBS Reloading Equipment Trim Pro-2 Power Kit w/Spring Loaded Shell Holder 90367

RCBS Reloading Equipment Trim Pro-2 Power Kit w/Spring Loaded Shell Holder 90367. RCBS Trim Pro-2 Power Kit w/Spring Loaded Shell Holder 90367 more

$269.49

FREE shipping

go to store
Lee Precision Pacesetter Rifle Die Sets - .221 Remington Fireball Pacesetter 3-Die Set

Lee Precision Pacesetter Rifle Die Sets - .221 Remington Fireball Pacesetter 3-Die Set

3-Die Set includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data Fits all 7/8"-14 reloading presses Mfg: Lee Precision more

Find other Hunting & Archery Equipment...

Related Searches:

$31.99

go to store
Lee Precision Pacesetter Rifle Die Sets - 223 Remington Pacesetter 3-Die Set

Lee Precision Pacesetter Rifle Die Sets - 223 Remington Pacesetter 3-Die Set

3-Die Set includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data Fits all 7/8"-14 reloading presses Mfg: Lee Precision more

Find other Hunting & Archery Equipment...

$31.99

go to store
Hornady Universal Shell Holders - #10

Hornady Universal Shell Holders - #10

Your reloads are only as good as the equipment you use, so demand quality. Hornady� Universal Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders fit all... more

$5.99

go to store
Hornady Universal Shell Holders - #1

Hornady Universal Shell Holders - #1

Your reloads are only as good as the equipment you use, so demand quality. Hornady� Universal Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders fit all... more

$5.99

go to store
Lee Pacesetter Dies w/Shellholder For 7MM Remington Magnum

Lee Pacesetter Dies w/Shellholder For 7MM Remington Magnum

Lee pacesetter dies include the exclusive Lee factory crimp die with most sets. Check Lee catalog for listings of dies with the factory crimp die included.. The die set also includes a conventional bullet seater and roll crimper. You can choose the... more

$30

compare prices
GG&G Remington 870 / 1100 / 1187 Shotgun Side Saddle

GG&G Remington 870 / 1100 / 1187 Shotgun Side Saddle

The GG&G Remington Side Saddle Shell Holder Fits Remington 870, 1100, and 1187 12ga Tactical Shotguns This is one of the latest additions to the GG&G line of Tactical Shotgun Accessories. Gear Up With The Good Stuff! more

$60

compare prices
Uncle Mike's Sentinel Duty Gear Rig Kit Blk L 38-42in, Black

Uncle Mike's Sentinel Duty Gear Rig Kit Blk L 38-42in, Black

Keeps all your duty gear equipment secured and just one buckle away Components made of molded foam with a Ballistic Nylon outer shell Includes: belt, four belt keepers, Radio holder, mkiii OC spray case, pager/glove case, 21 inch Size: Large. Color:... more

$73.47

FREE shipping

go to store
Archangel 7 Round Shell Holder Remington 870

Archangel 7 Round Shell Holder Remington 870

This 7 round 12 gauge shell carrier mounts to the side of the receiver on Remington 870 shotguns. Precision molded polymer shell carrier and aluminum mounting plate securely hold 7 additional rounds for fast tactical reloads of the magazine tube. A... more

$38.91 $26.95

go to store
Archangel 7 Round Shell Holder - Remington 870

Archangel 7 Round Shell Holder - Remington 870

This 7 round 12 gauge shell carrier mounts to the side of the receiver on Remington 870® shotguns. Precision molded polymer shell carrier and aluminum mounting plate securely hold 7 additional rounds for fast tactical reloads of the magazine tube. A... more

$24.16

go to store
ProMag AA112 Archangel (7)Rd Shell Hldr, Remington 870

ProMag AA112 Archangel (7)Rd Shell Hldr, Remington 870

All Outdoor Gear comes with a guarantee! more

Find other Hunting & Archery Equipment...

$28.56

go to store
Archangel 7 Round Shell Holder - Remington 870

Archangel 7 Round Shell Holder - Remington 870

"Archangel 7 Round Shell Holder - Remington 870Manufacture ID: AA112This 7 round 12 gauge shell carrier mounts to the side of the receiver on Remington 870 shotguns. Precision molded polymer shell carrier and aluminum mounting plate securely hold 7... more

$24.99

go to store
Side Saddle 6-shot Carrier - Remington 870/1100/1187, 12 Gauge

Side Saddle 6-shot Carrier - Remington 870/1100/1187, 12 Gauge

The SideSaddles carries six extra rounds in the most convenient and accessible location for quick reloading without losing sights. The Hytrel polymer shell holder is attached to an aluminum mounting plate that installs directly on the receiver of the... more

$24.86

go to store
Tacstar Industries Sidesaddle-Remington- 6Shot 1081157 - GSP 12587

Tacstar Industries Sidesaddle-Remington- 6Shot 1081157 - GSP 12587

""The SideSaddles carries six extra rounds in the most convenient and accessible location for quick reloading without losing sights. The Hytrel polymer shell holder is attached to an aluminum mounting plate that installs directly on the receiver of the... more

$36.03

go to store
TacStar Industries Side Saddle-Remington

TacStar Industries Side Saddle-Remington

The SideSaddles carries six extra rounds in the most convenient and accessible location for quick reloading without losing sights. The Hytrel polymer shell holder is attached to an aluminum mounting plate that installs directly on the receiver of the... more

$38.98

go to store
Tacstar Side Saddle Remington Model - 1081157

Tacstar Side Saddle Remington Model - 1081157

TacStar Side Saddle Remington 870, 1100, 1187 12Ga 6Rd 1081157 more

$22

compare prices
RCBS 99235 Shell Holder #35

RCBS 99235 Shell Holder #35

All Outdoor Gear comes with a guarantee! more

Find other Hunting & Archery Equipment...

$8.25

go to store
Uncle Mikes 88481 Butt Stock Shell Holder Rifle - Open Style Black - 4806

Uncle Mikes 88481 Butt Stock Shell Holder Rifle - Open Style Black - 4806

Elastic sleeve slips over stock or rifle. Sewn-on elastic loops keep ammo in place. Rifle model holds 9 cartridges. more

$6

compare prices
Allen Cases Active Duty Equipment Bag - Blk

Allen Cases Active Duty Equipment Bag - Blk

Active Duty Equipment BagFeatures:- 1200D rugged polyester shell- Semi-rigid internal support system- ID Holder - External straps hold large flashlight- Heavy-duty lockable zippers- Removable, interior divider- Bag size: 19\" x 8\" x 13\"- Color: Black more

$99.70

go to store
5-Station Shell Plate - #6

5-Station Shell Plate - #6

"5-Station Shell Plate - #6Manufacture ID: 88806RCBS #6 Shell plate 5 StationFits Calibers:- .22 Remington Jet- 5.6mm x 50 Rimmed- .357 Magnum- .357 Remington Maximum- .38 Smith & Wesson- .38 SpecialWarranty: If any of your RCBS equipment breaks or... more

$31.99

go to store
Sentinel Baton Holder, Blk Nyln 21", Card

Sentinel Baton Holder, Blk Nyln 21", Card

Sentinel Baton Holder - Black Nylon 21"Manufacture ID: 89065Sentinel duty gear built for those looking to stretch their budget. Made of molded foam with a ballistic nylon outer shell, sentinel is as functional as it is durable.Specifications:- Holders... more

$11.49

go to store
Plano 120501 Choke Tube Holder

Plano 120501 Choke Tube Holder

Hold up to 6 choke tubes securely in hard-shell plastic ensuring the safety of your gear. HOLDS 3-6 CHOKE TUBES DIVIDERS and PADDED INSERTS OFFER PROTECTION 5.75" X 3.75" X 1.25" more

$22.24

FREE shipping

go to store
Lee Precision Tool 90528 Universal Shellholder 11 For 444 Marlin 44 S

Lee Precision Tool 90528 Universal Shellholder 11 For 444 Marlin 44 S

For accuracy in reloading use Lee Precision Tool 90528 Universal Shellholder 11 for 444 Marlin 44 Special 44 Remington Magnum Its machined to close tolerance for maximum accuracy Universal shell holder Hardened steel Standard size for use with all... more

$4.49

go to store
GG&G Mossberg 500/590 Shotgun Side Saddle

GG&G Mossberg 500/590 Shotgun Side Saddle

The GG&G Mossberg Side Saddle Shell Holder Fits the Mossberg 500/590 12ga Tactical Shotguns This is one of the latest additions to the GG&G line of Tactical Shotgun Accessories. Gear Up With The Good Stuff! The unique design provides quick access to... more

$69.99

go to store
RC Supreme Select Kit

RC Supreme Select Kit

RC Supreme Select KitManufacture ID: 09363RCBS has taken the benchmark of single stage presses and surrounded it with the equipment you need (except dies and shell holders) to start loading like a pro. A simple solution for the beginner and pro alike.... more

$567.96

FREE shipping

go to store
GG&G Mossberg 930 Shotgun Side Saddle

GG&G Mossberg 930 Shotgun Side Saddle

The GG&G Mossberg Side Saddle Shell Holder Fits the Mossberg 930 12ga Tactical Shotguns This is one of the latest additions to the GG&G line of Tactical Shotgun Accessories. Gear Up With The Good Stuff! The unique design provides quick access to your... more

$69.99

go to store
RCBS RC Supreme Master Kit

RCBS RC Supreme Master Kit

Manufacturer: RCBS Manufacturer Part Number: 09354 UPC: 076683093547 Restricted Areas: Type: Press More Info: RCBS has taken the benchmark of single stage presses and surrounded it with the equipment you need (except dies and shell holders) to start... more

$325.33

go to store
5-Station Shell Plate - #26

5-Station Shell Plate - #26

5-Station Shell Plate - #26Manufacture ID: 88826RCBS #26 Shell plate 5 RotationFits Calibers:- .264 Winchester Magnum- 6.5 Remington Mag- 7mm Remington Magnum- 7mm x 65 Rimmed- .300 Winchester MagnumWarranty: If any of your RCBS equipment breaks or... more

$31.96

go to store
5-Station Shell Plate - #6

5-Station Shell Plate - #6

5-Station Shell Plate - #6Manufacture ID: 88806RCBS #6 Shell plate 5 StationFits Calibers:- .22 Remington Jet- 5.6mm x 50 Rimmed- .357 Magnum- .357 Remington Maximum- .38 Smith & Wesson- .38 SpecialWarranty: If any of your RCBS equipment breaks or... more

$31.96

go to store
5-Station Shell Plate - #19

5-Station Shell Plate - #19

5-Station Shell Plate - #19Manufacture ID: 88819RCBS #19 Shell plate 5 RotationFits Calibers:- 6.8 Remington SPC- .30 RemingtonWarranty: If any of your RCBS equipment breaks or doesn't work they will fix it or replace it. No time limit. No questions... more

$31.96

go to store
Mesa Tactical 8-Shell Side Saddle, 12 Gauge, Rugged, Reliable On-gun Shotshell Carriers, Fits Remington 870, Black

Mesa Tactical 8-Shell Side Saddle, 12 Gauge, Rugged, Reliable On-gun Shotshell Carriers, Fits Remington 870, Black

Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets and include high temperature adhesive-backed die-cut rubber... more

$95.00 $82.54

FREE shipping

go to store
Mesa Tactical 6-Shell Side Saddle, 20 Gauge, Fits Remington, On-gun shotshell carriers, Black Finish

Mesa Tactical 6-Shell Side Saddle, 20 Gauge, Fits Remington, On-gun shotshell carriers, Black Finish

Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets and include high temperature adhesive-backed die-cut rubber... more

$72.57

FREE shipping

go to store

More information about Hunting & Archery Equipment

Best prices on Gear shell holder remington in Hunting & Archery Equipment. Check out Bizrate for great deals on popular brands like . Use Bizrate's latest online shopping features to compare prices. Read product specifications, calculate tax and shipping charges, sort your results, and buy with confidence. Easily narrow your search and find the product that's perfect for you.