Audiosource integrated amplifier Integrated Amplifiers

Description:

AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25

Description:

Rack mount Ready / Bridge Mono Switch / A/B Speaker Switching / Front Panel Level and Balance Controls / Line 2 Auxiliary Output / 12VDC Trigger ON Signal to noise ratio - 100dBA Crosstalk - More than 70dB at 1kHz Frequency Response - 5Hz-25kHz (-3dB ref. 0dB)

Description:

This listing is for a brand new & factory sealed AUDIOSOURCE AMP110 75w 2-CHANNEL POWER AMP 250w 8-Ohm. There is a 1 year warranty on this itemDetails

Description:

Rack mount Ready / Bridgeable / Speaker A/B Switching / 3-15 Second Delay Time / Switch Function / High Level Input with Line 1/Line 2 Selector Line 2 Auxiliary Output Black Anodized Brushed Aluminum Faceplate 8-ohms Stereo Power at 1kHz - 80W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 4-ohms Stereo Power at 1kHz - 125W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 8-ohms Stereo Power at 1kHz - 175W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) Signal to noise ratio - 100dBA Crosstalk - More than 65dB at 1kHz Frequency Response - 5Hz-25kHz (-3dB ref. 0dB) Sensitivity - Variable, 350mV - 2.8V for Rated Power at 8-ohms

Description:

Call us retro renegades, call us wimpy old baby boomers, but here at etown.com Labs, we'll at least flirt with any power amp that has volume meters. If you're looking for something sub-Krell for a casual application, or want your starter system to have a touch of class, consider AudioSource's Power Two.This stereo amp boasts 80 watts per channel and also functions as a 200-watt mono-block in bridged mode. A set of loop-through jacks allows for multi-amp applications and the unit has auto-on/off capability. There's a dedicated set of inputs for a CD player. Signal-to-noise is 110 dB. And those cool meters can be set for low-volume monitoring.

Description:

150 Watt at 2-Channels - Auto Source Switching - A/B Speaker Outputs - Auto Power On/Off

Description:

High Level Input with Line 1/Line 2 Selector / Line 2 Auxiliary Output / Black Anodized Brushed Aluminum Faceplate / 100dBA Signal to Noise Ratio 4-ohms Stereo Power at 1kHz - 225W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 8-ohms Stereo Power at 1kHz - 450W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) Crosstalk - More than 65dB at 1kHz Frequency Response - 5Hz-25kHz (-3dB ref. 0dB) Sensitivity - Variable, 350mV - 2.8V for Rated Power at 8-ohms

Description:

"Bridgeable Amplifier refers to a configuration technique that combines the output of two channels into a single channel. This is often the desired way to drive a single speaker in a multiple-amp home theater application. Example: 5 amplifiers could all be bridged to each run a single speaker in a Dolby Digital home theater application.Toroidal Power Transformer Audiosource amplifiers exclusively use a Toroidal power transformer, which keep stray magnetic fields to an absolute minimum while providing as much signal fidelity as possible to the discrete output devices.Low Distortion (AmpOne/Two/Three) with less than .04% % Total Harmonic Distortion (THD)*, the AmpOne A, Amp Two and Amp Three deliver high quality performance. *Stereo Mode, 20Hz-20kHz. High and Medium Level Inputs allow direct connection of CD players and other devices without hooking up a preamp.Stereo Power (Watts x 2) 80 x 2,Bridged Power 200 Watts x 1"

Description:

AudioSource AMP102 150 Watt Power Amplifier features 50W x 2 @ 8ohms/75W x 2 @ 4ohms/150W x 2 @ 8ohms (Bridged), 12VDC Trigger ON, Front Panel Level /Balance Controls, A/B Speaker Switching, Frequency Response: 5Hz-25kHz, Rack Mount Ready

Description:

Description:

AudioSource PRE-ONE/A Stereo Pre Amplifier. Buy your discounted consumer electronics and related products online with free shipping from your accessories specialist - DiscountCity.ecrater.com.

Description:

The AMP102 is full bandwidth capable, bridgeable amplifier that features A/B speaker switching for flexibility and features 50 watts of stereo power, bridgeable to 150 watts, in a rackable amplifier design. Experience you can trust, performance you can...

Description:

The AMP110 is full bandwidth capable, bridgeable amplifier that features A/B speaker switching for flexibility and features 75 watts of stereo power, bridgeable to 225 watts, in a rackable amplifier design.

Description:

PRICE DROP!AUDIOSOURCE 75 WATT X 2STEREO POWER AMP STEREO POWER AMP 2 x 75 watts into 8 ohms, 2 x 125 watts in 4 ohms Stable down to 1-ohmA/B speaker switching and bridged mono switch Signal sensing "power on" and 12V DV "trigger on" Front panel level...

Description:

PRICE DROP!AUDIOSOURCE 50 WATT X 2STEREO POWER AMP STEREO POWER AMP Automatic source switching between 2 low-level stereo inputsSignal sensing "power on" and 12V DC "trigger on" functions2 x 50 watts RMS into 8 ohms, 2 x 125 watts into 4 ohms Stable...

Description:

Description:

Peak Power: 250 Watts - with Internal Bridging

Description:

New auto turn-on circuit150 watts (8 ohms) - 250 watts (4 ohms)Rack mountable design; amp integrates into any system95dB signal to noise ratio, THD 0.1%Frequency response: 20Hz20kHzBalanced (XLR): 20K ohm impedance inputUnbalanced (RCA): 10K ohm impedance inputSpeaker/line out (RCA) outputs5 1/2" W x 5 1/2" H x 11 3/4" D

Description:

PREAMP51

Description:

70 Watt Monoblock Power Amp - Frequency response: 20Hz?20kHz - 95 dB signal to noise ratio, THD 0.1% - New auto turn-on circuit - 70 watts/channel (8 ohms) 100 watts/channel (4 ohms) - 6 amplifiers per chassis - Rack mountable design; amp integrates into any system - Balanced (XLR): 20K ohm impedance input - Unbalanced (RCA): 10K ohm impedance input - Speaker/line out (RCA) outputs - 2 3/4"W x 5 1/2"H x 11 3/4"D

Description:

250 Watt Monoblock Power Amp - New auto turn-on circuit - 150 watts/channel (8 ohms) - 250 watts/channel (4 ohms) - Rack mountable design; amp integrates into any system - THD 0.1% - 95 dB signal to noise ratio - Frequency response: 20Hz?20kHz - Balanced (XLR): 20K ohm impedance input - Unbalanced (RCA): 10K ohm impedance input - Speaker/line out (RCA) outputs - 5 1/2"W x 5 1/2"H x 11 3/4"D

Description:

Mono-block Channels

Description:

Mono-block Channels

Description:

Mono-block Channels

Description:

Description:

AudioSource's AMP310 features 150 watts of stereo power, bridgeable to 450 watts, in a rackable amplifier design. Experience you can trust, performance you can count on. With source override, the AMP310 accommodates necessary interruptions such as PA...

Description:

AudioSource's AMP210 features 90 watts of stereo power, bridgeable to 250 watts, in a rackable amplifier design. Experience you can trust, performance you can count on.