Channel power amplifiers Integrated Amplifiers

you're in Integrated Amplifiers, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$87
  • product
AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25

starting at

$87
 

starting at

$190
  • product
"100 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.08% THD WRAT (Wide Range Amplifier Technology) preamp-level audio input/output loop lets you daisy-chain additional M-282s and play the same stereo source in several rooms input level adjustment auto power-on/off via audio-sensing or 12-volt trigger banana-plug-compatible speaker terminals"

starting at

$190
 

starting at

$375
  • product
High Level Input with Line 1/Line 2 Selector / Line 2 Auxiliary Output / Black Anodized Brushed Aluminum Faceplate / 100dBA Signal to Noise Ratio 4-ohms Stereo Power at 1kHz - 225W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 8-ohms Stereo Power at 1kHz - 450W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) Crosstalk - More than 65dB at 1kHz Frequency Response - 5Hz-25kHz (-3dB ref. 0dB) Sensitivity - Variable, 350mV - 2.8V for Rated Power at 8-ohms

starting at

$375
 

starting at

$76
  • product
A beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-3300T is a huge value in a small package.

starting at

$76
 

starting at

$499
  • product
The GFA 5400 replaces the GFA 545II and offers many of the same design features and sonic attributes of the enthusiastically received GFA 5802 and GFA 5500. The specifications should adequately describe all the pertinent information, including the increased power output into 8 and 4 ohms over the GFA 545II. As the 4 ohm power indicates, the current capability of the GFA 5400 has been substantially increased. The improvements are clearly audible with virtually all loudspeaker systems and will be appreciated by all who will use multiple 5400s in home theater systems.

starting at

$499
 

starting at

$348
  • product
Power amps designed for custom installers ADCOM distributed audio amplifiers have all the features custom installers demand, and the power to deliver audiophile sound and ultra-reliable performance. The GFA-600x series is designed with toroidal transformers, dual pairs of output transistors, FR4 fiberglass circuit boards and ultra efficient heat sinks. When you need amplifiers, remember, no company can match the legendary power of ADCOM.

starting at

$348
 

starting at

$1,635
  • product
8-channel power amplifier * 140 watts per channel into 8 ohms (20-20 kHz at 0.08% THD) * frequency response (analog in): 8-100,000 Hz (±3 dB) * signal-to-noise ratio: 105 dB * one RCA and one XLR input for each channel *

starting at

$1,635
 

starting at

$1,990
  • product
###############################################################################################################################################################################################################################################################

starting at

$1,990
 

starting at

$465
  • product
"discrete, high-current design 75 watts RMS per channel into 8 ohms (both channels driven) 100 watts RMS per channel into 4 ohms (both channels driven) stable into low-impedance loads three turn-on modes: music sensing, voltage trigger, and manual dual 5-way binding posts 12-volt control output voltage trigger input accepts 3-30V AC/DC removable 2-wire line cord cascade output lets you easily add another amp to your system left and right channel adjustable level controls DC, short circuit, and overload protection with automatic reset"

starting at

$465
 
store rating:
  • product
Model 5216IFD Dual polarization 16db Headend LNB amplifier with LNB powering 117 VAC power supply. Designed to drive dual polarization, passive IF distribution networks. May also be used as dual high level line extenders in cases where 117 VAC power is av
at
27%off
 
store rating:

buy refurbished

$799.97

 

  • product
Now, audio playback can be better than ever before! DVD-Audio and SACD high-resolution formats provide an unprecedented level of precision to audio playback. These new formats have up to five times the frequency bandwidth of conventional CDs. The...
at
 

starting at

$850
  • product
The AdCom GFA-7705 200 x 5 Channel Home Theater Amplifier multi-channel amplifier was designed to meet the performance requirements of the new DVD audio and SACD high-resolution audio formats. At a real 200 watts per channel (continuously into 8 ohms, (300 watts into 4 ohms) at rated bandwidth/distortion, the 7700s easily deliver all the current and vise-grip driver control that today's power-hungry, low-impedance loudspeakers demand. The monstrous power supply banks create extremely wide bandwidth (3 Hz-130 kHz), high-current swing capability and wide dynamic range. All together, this delivers the necessary response to effectively track and amplify all subtleties and nuances without loss or strain. This is THE power amplifier for your high performance system. Watts Per Channel - 200W @ 8 ohms, 300W @ 4 ohms Inputs/Outputs - 5 XLR, 5 analog audio, 5-Way speaker terminals Unit Dimensions - 8.5 x 17 x 17.5 (216 x 432 x 444.5 mm) Unit Weight - 69.5 lbs. (31.5 Kg)

starting at

$850
42%off
 
store rating:
  • product
Two channel power amplifier with automatic speaker switching for powering television sound through distributed audio speakers Compact Stereo Amplifier With 50 Watts Per Channel Automatically Switches Between Either One Or Two Pairs Of Speakers Stable...
at
 

starting at

$773
  • product
12-channel amplifier with 6 independent playback zones * 35 watts RMS per channel at 8 ohms (all channels driven) * 50 watts RMS per channel at 4 ohms (all channels driven) * adjacent channels are bridgeable to 100 watts RMS into 8 ohms (all channels driven) *

starting at

$773
 
store rating:
  • product
Power up to 12 audio channels at 30W each with the SONAMP 1230 RMF powered amplifier. Independent channel inputs allow you to match multiple sources with multiple zones. For home theater applications that require more power, channel bridging allows you...
at
 
store rating:
  $699.00

 

  • product
  • coupons
PEAVEY CS2000 Power Amp: A Proven Industry Favorite The Peavey CS2000 power amplifier offers a sonic superiority and legendary reliability
at

Huge Savings on Blowout Deals & Free Shipping on orders over $99

Expiration:  01/30/10

You'll find the best prices on Channel power amplifiers in Integrated Amplifiers when you shop online at bizrate. Do all your comparison shopping for Pyle, Adcom and Speakercraft Integrated Amplifiers in one place. Compare models and see which online Electronic stores have the best merchant ratings. Make an informed decision on Channel power amplifiers Integrated Amplifiers before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy AudioSource AMP-100 Stereo Power Amplifier or Onkyo M-282B 100 Watt Stereo Power Amplifier.