Description:

Geminiâs GPA Series Power Amplifiers provide you with excellent value for a wide range of intermediate power applications. With its bi-polar output stage technology and comprehensive protection circuitry to prevent overheating, the GPA Series gives you the high-end features you want in a product that is well within your budget.

Description:

PYLE 3000W HYBRID PREAMP W AM FM TUNER USB *NIC* - 3000-Watt Hybrid Pre-Amplifier W/AM-FM Tuner/USB/Dual Wireless Mic

Description:

with Wireless Microphone System

Description:

400 Watt Power

Description:

AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25

Description:

PYLE 1000W PROFESSIONAL POWER AMPLIFIER *NIC* - 1000-Watt Professional Power Amplifier

Description:

70w RMS (140w peak) per channel at 8 ohms, 90w RMS (180w peak) per channel at 4 ohms, and 180w RMS (360w peak) at 8 ohms bridged - measured using EIA standards Bi-polar output stage technology for the finest sound quality and reliability High output power to drive professional loudspeakers without clipping Comprehensive protection circuitry with protect LED indicator 1/4"TRS & XLR balanced/unbalanced inputs SpeakonTM & 1/4" speaker outputs Three modes of operation - stereo, parallel mono, and mono bridge Ground lift switch Decibel (dB) level meter with clip LEDs Selectable voltage for worldwide operation Dual aluminum extrusion heat sink design with directly mounted output transistors for no-fault operation Air guide with front-to-rear airflow and cooling fan for thermal stability and reliability Compact 2U well balanced enclosure Steel reinforced chassis Frequency Response of 30Hz - 50 kHz Signal to Noise Ratio of 100 dB below rated power at 8 ohms 19" W x 10.75" D x 3.5" H (483 x 273 x 89 mm) Weight: 16.3 lbs

Description:

Pyle PT600A Pyle PT600A Integrated Stereo Amplifier

Description:

High Power Amplifier with Pure Sound Technology,ToP-ART, CD/DVD Direct Amplification and Linear Damping Flip-down hidden control panel offers headphone jack, speaker A, or A+B selector, bass/treble/balance controls, loudness control and rec out selector Rec Out Selector Continuously Variable Loudness Control and Bass/Treble/Balance Controls (with Center Clicks) Remote Controllable Motor-Driven Volume Control RoHS Compliant Speaker A, B or A+B Selection Gold-Plated CD Input Terminals Pure Direct Switch System Remote Control Unit

Description:

Dual RCA and combo inputsDual output level controls and illuminationStereo or bridged power into 4 or 8 ohms with stereo/mono switch19" rack

Description:

This listing is for a brand new PYLE PZR6XA 2200 Watt Power DJ Amplifier.Details * Dual RCA and XLR-1/4" Combo Inputs * AC Accessory Inlet * Stereo or Bridged Power Into 4 or 8 Ohms * 2 Speaker Connections via Banana Plugs * Heavy Duty Fan Cooling and Aluminum Heatsink * Ground Lift Switch * 110/220 Voltage Selector * Dimensions:3.47"H x 19"W x 10.67"D * Brand New & Factory Sealed

Description:

Description:

Description:

A beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-3300T is a huge value in a small package.

Description:

The GFA 5400 replaces the GFA 545II and offers many of the same design features and sonic attributes of the enthusiastically received GFA 5802 and GFA 5500. The specifications should adequately describe all the pertinent information, including the increased power output into 8 and 4 ohms over the GFA 545II. As the 4 ohm power indicates, the current capability of the GFA 5400 has been substantially increased. The improvements are clearly audible with virtually all loudspeaker systems and will be appreciated by all who will use multiple 5400s in home theater systems.

Description:

2000-watt peak power600 watts @ 2 ohms 460 watts @ 4 ohms 240 watts @ 8 ohmsInputs: RCA (2 Audio Sources)Outputs: Banana Binding Post

Description:

With the Onkyo A-9555 integrated digital amplifier, sound quality takes precedence over all else. By using Onkyo's exclusive Vector Linear(VL) Digital technology to remove any spike noise before it introduces errors into the inversion timing, it is possible to get a highly accurate analog-to-digital conversion. At the heart of the A-9555 is a Pure Stream Power Supply?essentially a large power transformer?that ensures that you always have the on-demand power for the clarity and detail of a range of musical genres. By integrating the fundamentals of audio amplification with the potential of digital amplification, the A-9555 is a revelation in superior audio reproduction. Pulse Width Modulation (PWM) and Onkyo's Vector Linear (VL)Digital Technology combine with Optimum Gain Volume Circuitry to provide the superior performance expected by today's audiophile. Output Level and Impedance - Rec out - 200 mV/2.2 k-ohms / Phono Overload 70 mV (MM, 1 kHz, 0.5 %)/ Frequency Response 10 Hz-60 kHz (+ 1, - 3 dB, CD) Signal-to-Noise Ratio - 100 dB (CD, IHF-A), 70 dB (Phono, IHF-A)/ Speaker Impedance - 4 ohms-16 ohms Power Supply - AC 120 V, 60Hz Dimensions (W x H x D) - 17-1/8 x 5-13/16 x 16-15/16 inches

Description:

Rack mount Ready / Bridgeable / Speaker A/B Switching / 3-15 Second Delay Time / Switch Function / High Level Input with Line 1/Line 2 Selector Line 2 Auxiliary Output Black Anodized Brushed Aluminum Faceplate 8-ohms Stereo Power at 1kHz - 80W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 4-ohms Stereo Power at 1kHz - 125W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) 8-ohms Stereo Power at 1kHz - 175W at Less than 1% THD (Continuous Operation at 1/8 Rated Power, 20-20kHz) Signal to noise ratio - 100dBA Crosstalk - More than 65dB at 1kHz Frequency Response - 5Hz-25kHz (-3dB ref. 0dB) Sensitivity - Variable, 350mV - 2.8V for Rated Power at 8-ohms

Description:

"100 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.08% THD WRAT (Wide Range Amplifier Technology) preamp-level audio input/output loop lets you daisy-chain additional M-282s and play the same stereo source in several rooms input level adjustment auto power-on/off via audio-sensing or 12-volt trigger banana-plug-compatible speaker terminals"

Description:

19 in. Rack Mountable - XLR/1/4 in. Input Jacks - Channel Volume Controls - Bridge/Active Indicator