Plumbing Supplies › kee klamp pipe flange

Kee Klamp Swivel Flange

Kee Klamp® Fittings Swivel Flange A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to Type F50 and Type M58. PA Warning: It is not recommended for use as a base flange to support guardrailing, ...

Kee Klamp 90-Degree Three-Socket Tee Galvanized Iron Pipe Fittings - Fits 1" Schedule 40 Pipe

Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.

Kee Klamp Plastic Pipe Plug

Kee Klamp® Fittings Pipe Plug A grey plastic plug to fit open ended pipes.

kee safety 145-7 crossover coupling galvanized steel 1-1/4" ips (1.72" id)

this fitting is designed to give a 90 degree offset crossover. as there are two socket set screws in the sleeve, this kee klamp fitting can be used where a join is required in the horizontal pipe. for economy, it is possible to use a kk45 ...

Flange 1.5 Inch Pipe Fitting

KEE KLAMP® FITTINGS FLANGE A heavy duty, four point fixing, base flange. Ideal when structural fixing is required. 5/16" diameter fixing holes.

Schedule 40 Aluminum Pipe 36' (Price Per Foot) 1-1/2" Dia.

Aluminum Schedule 40 Pipe for Kee Klamp Fittings Schedule 40 Pipe is made to specific tolerances to fit easily into Kee Klamp fittings. This galvanized pipe provides an economical, durable solution. Sold in cases of 6. Each pipe measures ...

Kee Klamp Adjustable Sideout Tee

Kee Klamp® Fittings Adjustable Sideout Tee Used in pairs to form variable angle joints between 90 and 180 . When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of Type 19-8 ...

kee safety 59-9 spigot flange galvanized steel 2" ips (2.41" id)

a spigot flange which fits inside the pipe and is not secured by a set screw. type 59 can only be used with pipe wall thickness of 1/8" and in light, self supporting structures. type 59 is manufactured in aluminum. no fixing holes are ...

Kee Klamp 90-Degree Elbow Galvanized Iron Pipe Fittings- Fits 1" Schedule 40 Pipe

Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.

Kee Klamp Medium Flange

Kee Klamp® Fittings Medium Flange This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. 3/8"diameter ...

Kee Klamp Rail Flange

KEE KLAMP® FITTINGS RAILING STANDARD FLANGE Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a ...

Kee Klamp Single Socket Tee

Kee Klamp® Fittings Single Socket Tee Designed to give a 90 butt joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on ...

Kee Klamp Swivel Flange Galvanized Iron Pipe Fittings - Fits 2" Schedule 40 Pipe

Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.

Kee Klamp Wall Flange Galvanized Iron Pipe Fittings- Fits 1-1/2" Schedule 40 Pipe

Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.

Aluminum Straight Coupling

KEE KLAMP® FITTINGS Straight Coupling Designed to give an in-line joint between tubes of the same size. Frequently used to allow full pipes to be used in railing applications.

Kee Klamp Swivel Flange

Kee Klamp® Fittings Swivel Flange A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to Type F50 and Type M58. PA Warning: It is not recommended for use as a base flange to support guardrailing, ...

Kee Klamp Railing Flange

KEE KLAMP® FITTINGS RAIL FLANGE No threading or welding or pipe required! Build strong rigid structures: railings, racks, awning frames, fencing and 1,001 other applications. Build your own rack, guard rails, tables, etc. Long lasting ...

Kee Klamp Two-Socket Cross Galvanized Iron Pipe Fittings- Fits 1-1/4" Schedule 40 Pipe

Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.