You're in Plumbing Supplies

Need a Personal Shopper?

Subscribe to
Bizrate emails for the hottest
deals & products
,
PLUS a chance to

WIN $25

sign me up!

New winners chosen weekly.
No purchase necessary.

Kee Safety 84-7 Malleable Plug Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 84-7 Malleable Plug Galvanized Steel 1-1/4" IPS (1.72" ID)

A metal drive-in plug which is difficult to remove when installed. For an alternative in plastic, see KK77. This fitting can only be used with Schedule 40 steel pipe. ... more

Kee Safety 84-7 Malleable Plug Galvanized Steel 1-1/4" IPS (1.72" ID)

A metal drive-in plug which is difficult to remove when installed. For an alternative in plastic, see KK77. This fitting can only be used with Schedule 40 steel pipe.

BuyRailings.com

$4.61

FREE shipping

go to store
Kee Safety C58-7 Swivel Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety C58-7 Swivel Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to KKF50 and KKM58. It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure. Part Weight A C58-5 1.54 lbs. 5... ... more

Kee Safety C58-7 Swivel Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to KKF50 and KKM58. It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure. Part Weight A C58-5 1.54 lbs. 5...

BuyRailings.com

$25.45

FREE shipping

go to store
Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID) ... more

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Amazon Marketplace

$16.52

go to store
Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID) ... more

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Amazon Marketplace

$13.58

go to store
EATON Weatherhead Coll-O-Crimp 04U-644 90 Degree Female Swivel Long Drop Tube Elbow Fitting, SAE 37 Degree, Low Carbon Steel, 1/4" Hose ID, 1/4" Tube Size

EATON Weatherhead Coll-O-Crimp 04U-644 90 Degree Female Swivel Long Drop Tube Elbow Fitting, SAE 37 Degree, Low Carbon Steel, 1/4" Hose ID, 1/4" Tube Size

Eaton 04U-644 Female 90 Elbow 1/4" Hyd Hose - 1/4 JIC Fitting 37° Flare 7/16"-20 Thread Size ... more

$6.25

go to store
Aeroquip 1AA4FJC4 Carbon Steel Global TTC (Thru the Cover) Crimp Hose Fitting Female JIC Swivel, 90 Degree Long Drop Elbow, 1/4" Hose ID, 7/16" - 20 Thread

Aeroquip 1AA4FJC4 Carbon Steel Global TTC (Thru the Cover) Crimp Hose Fitting Female JIC Swivel, 90 Degree Long Drop Elbow, 1/4" Hose ID, 7/16" - 20 Thread

This Aeroquip global crimp hydraulic hose fitting is a 90-degree long drop elbow, or "ell," for connecting a hose to pump at a 90-degree angle to change the direction of flow, with a crimp socket on one end that attaches to the hose, with no skiving... ... more

Aeroquip 1AA4FJC4 Carbon Steel Global TTC (Thru the Cover) Crimp Hose Fitting Female JIC Swivel, 90 Degree Long Drop Elbow, 1/4" Hose ID, 7/16" - 20 Thread

This Aeroquip global crimp hydraulic hose fitting is a 90-degree long drop elbow, or "ell," for connecting a hose to pump at a 90-degree angle to change the direction of flow, with a crimp socket on one end that attaches to the hose, with no skiving...

Amazon.com

$17.75

go to store
Kee Klamp 26-7 Two Socket Cross Galvanized Steel 1-1/4" Ips (1.72" Id)

Kee Klamp 26-7 Two Socket Cross Galvanized Steel 1-1/4" Ips (1.72" Id)

Kee Klamp Kee Klamp Model 26-7 Two Socket Cross Galvanized Steel 1-1/4" IPS (1.72" ID) Payments: We accept payments by Paypal, Visa, Mastercard, Discover and American Express or by phone at 1-303-288-9633 during business hours. Shipping General: All... ... more

Kee Klamp 26-7 Two Socket Cross Galvanized Steel 1-1/4" Ips (1.72" Id)

Kee Klamp Kee Klamp Model 26-7 Two Socket Cross Galvanized Steel 1-1/4" IPS (1.72" ID) Payments: We accept payments by Paypal, Visa, Mastercard, Discover and American Express or by phone at 1-303-288-9633 during business hours. Shipping General: All...

eBay

$17.00

FREE shipping

go to store
Kee Safety 10-78 Reducing Fitting - Single Socket Tee Galvanized Steel 1-1/4" x 1-1/2" IPS (1.72" x

Kee Safety 10-78 Reducing Fitting - Single Socket Tee Galvanized Steel 1-1/4" x 1-1/2" IPS (1.72" x

Designed to give a 90 butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the... ... more

Kee Safety 10-78 Reducing Fitting - Single Socket Tee Galvanized Steel 1-1/4" x 1-1/2" IPS (1.72" x

Designed to give a 90 butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the...

BuyRailings.com

$18.62

FREE shipping

go to store
Kee Safety 87-7 Angle Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 87-7 Angle Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Used to join the top rail to an end upright on a guardrail on a slope from 0 to 11 at both top and bottom of the run. Part Weight A D 87-7 1.76 lbs. 7 2.36 in. 87-8 1.98 lbs. 8 2.68 in. ... more

Kee Safety 87-7 Angle Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Used to join the top rail to an end upright on a guardrail on a slope from 0 to 11 at both top and bottom of the run. Part Weight A D 87-7 1.76 lbs. 7 2.36 in. 87-8 1.98 lbs. 8 2.68 in.

BuyRailings.com

$22.13

FREE shipping

go to store
Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

A 90 elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Part Weight A D 15-4 0.29 lbs. 4 1.34 in. 15-5 0.59 lbs. 5 1.61 in. 15-6 0.81 lbs. 6 1.81 in. 15-7 1.47 lbs. 7 2.36 in. 15-8 1.69 lbs. 8 2.68... ... more

Kee Safety 15-7 90 Degree Elbow Galvanized Steel 1-1/4" IPS (1.72" ID)

A 90 elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Part Weight A D 15-4 0.29 lbs. 4 1.34 in. 15-5 0.59 lbs. 5 1.61 in. 15-6 0.81 lbs. 6 1.81 in. 15-7 1.47 lbs. 7 2.36 in. 15-8 1.69 lbs. 8 2.68...

BuyRailings.com

$16.52

FREE shipping

go to store
Kee Safety 19-7 Adjustable Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 19-7 Adjustable Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Used in pairs to form variable angle joints between 90 and 180 . When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of KK19-8 and KK19-85, you can produce an angle range between 60 and... ... more

Kee Safety 19-7 Adjustable Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Used in pairs to form variable angle joints between 90 and 180 . When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of KK19-8 and KK19-85, you can produce an angle range between 60 and...

BuyRailings.com

$33.92

FREE shipping

go to store
Kee Safety 21-7 90 Degree Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 21-7 90 Degree Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Most frequently paired with KK20 to give a 90 corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting. Part Weight A D 21-4 0.31 lbs. 4 1.34 in. 21-5 0.31 lbs. 5 1.61 in. 21-6 0.9... ... more

Kee Safety 21-7 90 Degree Side Outlet Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Most frequently paired with KK20 to give a 90 corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting. Part Weight A D 21-4 0.31 lbs. 4 1.34 in. 21-5 0.31 lbs. 5 1.61 in. 21-6 0.9...

BuyRailings.com

$19.16

FREE shipping

go to store
Kee Safety 68-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 68-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. e indicates diameter of fixing holes. If the upright is required to pass through the fitting by machining out the base stop,... ... more

Kee Safety 68-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. e indicates diameter of fixing holes. If the upright is required to pass through the fitting by machining out the base stop,...

BuyRailings.com

$29.17

FREE shipping

go to store
Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed to give a 90 butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the... ... more

Kee Safety 10-7 Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed to give a 90 butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the...

BuyRailings.com

$13.58

FREE shipping

go to store
Kee Safety 26-7 Two Socket Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 26-7 Two Socket Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Usually paired with KK25 to give a 90 joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting. Part Weight A B D 26-4 0.29 lbs. 4 4 2.68 in. 26-5 0.59 lbs. 5 5 3.19 in. 26-6 0.88 lbs. 6 6... ... more

Kee Safety 26-7 Two Socket Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Usually paired with KK25 to give a 90 joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting. Part Weight A B D 26-4 0.29 lbs. 4 4 2.68 in. 26-5 0.59 lbs. 5 5 3.19 in. 26-6 0.88 lbs. 6 6...

BuyRailings.com

$18.51

FREE shipping

go to store
Kee Safety 46-7 Combination Socket Tee and Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 46-7 Combination Socket Tee and Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to... ... more

Kee Safety 46-7 Combination Socket Tee and Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to...

BuyRailings.com

$22.60

FREE shipping

go to store
Kee Safety 67-7 Angle Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 67-7 Angle Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

KK67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3 up to a maximum of 11 , measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes.... ... more

Kee Safety 67-7 Angle Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

KK67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3 up to a maximum of 11 , measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes....

BuyRailings.com

$23.62

FREE shipping

go to store
Kee Safety 62-7 Standard Railing Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 62-7 Standard Railing Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the... ... more

Kee Safety 62-7 Standard Railing Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Ideal when a structural fixing is required. When fixing guardrailing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor. The two set screws in the...

BuyRailings.com

$21.71

FREE shipping

go to store
Kee Safety 81-7 Single Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 81-7 Single Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Single clips for attaching wire-mesh infilling. For economy it is possible to use Type 81 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with... ... more

Kee Safety 81-7 Single Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Single clips for attaching wire-mesh infilling. For economy it is possible to use Type 81 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with...

BuyRailings.com

$4.42

FREE shipping

go to store
Kee Safety 59-7 Spigot Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 59-7 Spigot Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A spigot flange which fits inside the pipe and is not secured by a set screw. Type 59 can only be used with pipe wall thickness of 1/8" and in light, self supporting structures. Type 59 is manufactured in aluminum. No fixing holes are provided in this... ... more

Kee Safety 59-7 Spigot Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A spigot flange which fits inside the pipe and is not secured by a set screw. Type 59 can only be used with pipe wall thickness of 1/8" and in light, self supporting structures. Type 59 is manufactured in aluminum. No fixing holes are provided in this...

BuyRailings.com

$18.95

FREE shipping

go to store
Kee Safety 86-7 Angle Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 86-7 Angle Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Used to join the middle rail to an end upright on a guardrail on a slope from 0 to 11 . Pipe cannot be joined within this fitting. Part Weight A D 86-7 1.21 lbs. 7 2.36 in. 86-8 1.67 lbs. 8 2.68 in. ... more

Kee Safety 86-7 Angle Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Used to join the middle rail to an end upright on a guardrail on a slope from 0 to 11 . Pipe cannot be joined within this fitting. Part Weight A D 86-7 1.21 lbs. 7 2.36 in. 86-8 1.67 lbs. 8 2.68 in.

BuyRailings.com

$15.86

FREE shipping

go to store
Kee Safety 63-7 Variable Angle Base Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 63-7 Variable Angle Base Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is similar to KK62, but is used to set up the upright at an angle between 45 to 60 . This fitting should only be subjected to light loads, which cannot be positioned at 90 to the applied load. For greater loads or other pipe sizes, a... ... more

Kee Safety 63-7 Variable Angle Base Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is similar to KK62, but is used to set up the upright at an angle between 45 to 60 . This fitting should only be subjected to light loads, which cannot be positioned at 90 to the applied load. For greater loads or other pipe sizes, a...

BuyRailings.com

$29.43

FREE shipping

go to store
Kee Safety 14-7 Straight Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 14-7 Straight Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed to form an inline joint between two pieces of pipe of the same size. Where a constant diameter is required along the outside of the pipe (such as for ADA handrail or garment storage), an internal spigot (KK18) should be considered. ... more

Kee Safety 14-7 Straight Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed to form an inline joint between two pieces of pipe of the same size. Where a constant diameter is required along the outside of the pipe (such as for ADA handrail or garment storage), an internal spigot (KK18) should be considered.

BuyRailings.com

$15.38

FREE shipping

go to store
Kee Safety A45-7 Split Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety A45-7 Split Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

The unique "Hinge and Pin" system of this fittings enables existing structures to be easily extended without the need for dismantling. This fitting is designed to give a 90 offset crossover joint. Pipe should not be joined within the fitting. KKA45... ... more

Kee Safety A45-7 Split Crossover Galvanized Steel 1-1/4" IPS (1.72" ID)

The unique "Hinge and Pin" system of this fittings enables existing structures to be easily extended without the need for dismantling. This fitting is designed to give a 90 offset crossover joint. Pipe should not be joined within the fitting. KKA45...

BuyRailings.com

$28.27

FREE shipping

go to store
Kee Safety 82-7 Double Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 82-7 Double Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Double clips for attaching wire-mesh infilling. For economy it is possible to use Type 82 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with... ... more

Kee Safety 82-7 Double Sided Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Double clips for attaching wire-mesh infilling. For economy it is possible to use Type 82 clips without the safety attachment, to secure various types of infill panels (plyboard, perspex, etc.) up to a thickness of 25/64". All clips are supplied with...

BuyRailings.com

$9.81

FREE shipping

go to store
Kee Safety 60-7 Extra Heavy Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 60-7 Extra Heavy Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings only, is for use on structures where the fixing required is positional only. Frequently used as... ... more

Kee Safety 60-7 Extra Heavy Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings only, is for use on structures where the fixing required is positional only. Frequently used as...

BuyRailings.com

$41.15

FREE shipping

go to store
Kee Safety 29-7 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 29-7 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed as an alternative to the KK12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30 and 60 . As an alternative, it is possible to use KK29 in its vertical position in... ... more

Kee Safety 29-7 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed as an alternative to the KK12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30 and 60 . As an alternative, it is possible to use KK29 in its vertical position in...

BuyRailings.com

$21.02

FREE shipping

go to store
Kee Safety 114-7 Swivel Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 114-7 Swivel Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal swivel fitting, designed to accommodate varying angles on handrailing for staircases, ramps, or bracing. Used in conjunction with KK10, KK15, KK25 or KK45, it eliminates the need for specially drilled angle fitting Type 27 and Type 28. Part... ... more

Kee Safety 114-7 Swivel Tee Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal swivel fitting, designed to accommodate varying angles on handrailing for staircases, ramps, or bracing. Used in conjunction with KK10, KK15, KK25 or KK45, it eliminates the need for specially drilled angle fitting Type 27 and Type 28. Part...

BuyRailings.com

$23.91

FREE shipping

go to store
Kee Safety 70-7 Rail Support Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 70-7 Rail Support Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. KK70 is also... ... more

Kee Safety 70-7 Rail Support Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. KK70 is also...

BuyRailings.com

$18.14

FREE shipping

go to store
Kee Safety 79-7 Sheeting Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 79-7 Sheeting Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is used to attach profiled sheeting material to pipe. The fitting is supplied with the following hardware: one M6x50mm roofing bolt, one M6 square nut, and one M6 lock washer. BZP finish. e indicates diameter of bolt hole. /div> Part... ... more

Kee Safety 79-7 Sheeting Clip Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is used to attach profiled sheeting material to pipe. The fitting is supplied with the following hardware: one M6x50mm roofing bolt, one M6 square nut, and one M6 lock washer. BZP finish. e indicates diameter of bolt hole. /div> Part...

BuyRailings.com

$2.66

FREE shipping

go to store
Kee Safety 316-7 Parapet Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 316-7 Parapet Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A component designed to retrofit roof parapets that are an unsafe height. Rail anchor is angled 25 degrees from the vertical so that the building's visage is unaffected by the implemented railing. Two holes are located in the top mounting bracket for... ... more

Kee Safety 316-7 Parapet Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

A component designed to retrofit roof parapets that are an unsafe height. Rail anchor is angled 25 degrees from the vertical so that the building's visage is unaffected by the implemented railing. Two holes are located in the top mounting bracket for...

BuyRailings.com

$56.59

FREE shipping

go to store
Kee Safety 18-7 Internal Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 18-7 Internal Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must... ... more

Kee Safety 18-7 Internal Coupling Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must...

BuyRailings.com

$16.35

FREE shipping

go to store
Kee Safety 30-7 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 30-7 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed as an alternative to the KK28 fitting, this adjustable fitting can be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected angle between 30 and... ... more

Kee Safety 30-7 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/4" IPS (1.72" ID)

Designed as an alternative to the KK28 fitting, this adjustable fitting can be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected angle between 30 and...

BuyRailings.com

$31.47

FREE shipping

go to store
Kee Safety 66-7 Ground Socket Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 66-7 Ground Socket Galvanized Steel 1-1/4" IPS (1.72" ID)

A ground socket fitting for setting in concrete; the posts may either be permanent or removable as required. It incorporates a socket set screw fixing and can be supplied with a plug (sold separately) to fill the hole when the pipe is removed. Part... ... more

Kee Safety 66-7 Ground Socket Galvanized Steel 1-1/4" IPS (1.72" ID)

A ground socket fitting for setting in concrete; the posts may either be permanent or removable as required. It incorporates a socket set screw fixing and can be supplied with a plug (sold separately) to fill the hole when the pipe is removed. Part...

BuyRailings.com

$52.32

FREE shipping

go to store
Kee Safety 64-7 Standard Vertical Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 64-7 Standard Vertical Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a... ... more

Kee Safety 64-7 Standard Vertical Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a...

BuyRailings.com

$41.13

FREE shipping

go to store
Kee Safety 265-7 Offset Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 265-7 Offset Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

Offset Railing Base The Type 265 fitting is designed for palm fixing guardrailing and balustrading to walls, parapets steps and ramps. The fitting has been designed with an offset barrel to enable clearance of overhangs and cappings. ... more

Kee Safety 265-7 Offset Railing Base Galvanized Steel 1-1/4" IPS (1.72" ID)

Offset Railing Base The Type 265 fitting is designed for palm fixing guardrailing and balustrading to walls, parapets steps and ramps. The fitting has been designed with an offset barrel to enable clearance of overhangs and cappings.

BuyRailings.com

$37.90

FREE shipping

go to store
Kee Safety 115-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 115-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal swivel fitting, designed to accommodate varying angles on handrailing for staircases, ramps, or bracing. Used in conjunction with KK10, KK15, KK25 or KK45, it eliminates the need for specially drilled angle fitting KK27 and KK28. Part... ... more

Kee Safety 115-7 Wall Flange Galvanized Steel 1-1/4" IPS (1.72" ID)

An internal swivel fitting, designed to accommodate varying angles on handrailing for staircases, ramps, or bracing. Used in conjunction with KK10, KK15, KK25 or KK45, it eliminates the need for specially drilled angle fitting KK27 and KK28. Part...

BuyRailings.com

$36.76

FREE shipping

go to store
Kee Safety P58-7 Double Tab Panel w/ Recessed Hole Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety P58-7 Double Tab Panel w/ Recessed Hole Galvanized Steel 1-1/4" IPS (1.72" ID)

Double Tab Panel with Countersunk Hole. Designed for the securing of various types of panels and flooring to pipe structures (i.e. plywood, plastic sheeting, wood planking, etc.). This fitting has a double offset flange to allow for the attachment of... ... more

Kee Safety P58-7 Double Tab Panel w/ Recessed Hole Galvanized Steel 1-1/4" IPS (1.72" ID)

Double Tab Panel with Countersunk Hole. Designed for the securing of various types of panels and flooring to pipe structures (i.e. plywood, plastic sheeting, wood planking, etc.). This fitting has a double offset flange to allow for the attachment of...

BuyRailings.com

$20.21

FREE shipping

go to store
Kee Safety 69-7 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/4" IPS (1.72" ID)

Kee Safety 69-7 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/4" IPS (1.72" ID)

The KK69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or... ... more

Kee Safety 69-7 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/4" IPS (1.72" ID)

The KK69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or...

BuyRailings.com

$50.39

FREE shipping

go to store
Show
Hide
Hide