You're in Plumbing Supplies

Need a Personal Shopper?

Subscribe to
Bizrate emails for the hottest
deals & products
,
PLUS a chance to

WIN $25

sign me up!

New winners chosen weekly.
No purchase necessary.

Kee Safety 15-8 90 Degree Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 15-8 90 Degree Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

A 90� elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Part Weight A D 15-4 0.29 lbs. 4 1.34 in. 15-5 0.59 lbs. 5 1.61 in. 15-6 0.81 lbs. 6 1.81 in. 15-7 1.47 lbs. 7 2.36 in. 15-8 1.69 lbs. 8 2.68... ... more

Kee Safety 15-8 90 Degree Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

A 90� elbow joint, most frequently used as an end joint for the top rail of safety railing on a level site. Part Weight A D 15-4 0.29 lbs. 4 1.34 in. 15-5 0.59 lbs. 5 1.61 in. 15-6 0.81 lbs. 6 1.81 in. 15-7 1.47 lbs. 7 2.36 in. 15-8 1.69 lbs. 8 2.68...

BuyRailings.com

$20.93

FREE shipping

go to store
Kee Safety 87-8 Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 87-8 Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Used to join the top rail to an end upright on a guardrail on a slope from 0� to 11� at both top and bottom of the run. Part Weight A D 87-7 1.76 lbs. 7 2.36 in. 87-8 1.98 lbs. 8 2.68 in. ... more

Kee Safety 87-8 Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Used to join the top rail to an end upright on a guardrail on a slope from 0� to 11� at both top and bottom of the run. Part Weight A D 87-7 1.76 lbs. 7 2.36 in. 87-8 1.98 lbs. 8 2.68 in.

BuyRailings.com

$29.87

FREE shipping

go to store
Kee Safety 55-8 Obtuse Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 55-8 Obtuse Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK55 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases. Part Weight A D E 55-6 1.12 lbs. 6 1.81 in. 4.57 in. 55-7 1.78 lbs. 7 2.17 in.... ... more

Kee Safety 55-8 Obtuse Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK55 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases. Part Weight A D E 55-6 1.12 lbs. 6 1.81 in. 4.57 in. 55-7 1.78 lbs. 7 2.17 in....

BuyRailings.com

$39.10

FREE shipping

go to store
Kee Safety 92-8 PGR Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 92-8 PGR Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

KK92 is used to join the top rail to an end post. (Special Order Only) Part Weight A D E 92-8 2.84 lbs. 8 3.9 in. 3.5 in. ... more

Kee Safety 92-8 PGR Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

KK92 is used to join the top rail to an end post. (Special Order Only) Part Weight A D E 92-8 2.84 lbs. 8 3.9 in. 3.5 in.

BuyRailings.com

$40.57

FREE shipping

go to store
Kee Safety 56-8 Acute Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 56-8 Acute Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

KK56 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases. Part Weight A D E F 56-8 3.19 lbs. 8 5.28 in. 4.41 in. 4.41 in. ... more

Kee Safety 56-8 Acute Angle Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

KK56 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases. Part Weight A D E F 56-8 3.19 lbs. 8 5.28 in. 4.41 in. 4.41 in.

BuyRailings.com

$46.54

FREE shipping

go to store
Kee Safety BC53-88 Swivel Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety BC53-88 Swivel Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK53-8 fitting has been designed as a variable angle inline connection, adjustable through 202�. An entire structure should not be constructed from KK53-8 or any other swivel fitting, as these types would not provide sufficient stability or... ... more

Kee Safety BC53-88 Swivel Elbow Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK53-8 fitting has been designed as a variable angle inline connection, adjustable through 202�. An entire structure should not be constructed from KK53-8 or any other swivel fitting, as these types would not provide sufficient stability or...

BuyRailings.com

$38.55

FREE shipping

go to store
Kee Safety 21-8 90 Degree Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 21-8 90 Degree Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Most frequently paired with KK20 to give a 90� corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting. Part Weight A D 21-4 0.31 lbs. 4 1.34 in. 21-5 0.31 lbs. 5 1.61 in. 21-6 0.9... ... more

Kee Safety 21-8 90 Degree Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Most frequently paired with KK20 to give a 90� corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting. Part Weight A D 21-4 0.31 lbs. 4 1.34 in. 21-5 0.31 lbs. 5 1.61 in. 21-6 0.9...

BuyRailings.com

$21.80

FREE shipping

go to store
Kee Safety 19-8 Adjustable Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 19-8 Adjustable Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Used in pairs to form variable angle joints between 90� and 180�. When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of KK19-8 and KK19-85, you can produce an angle range between 60� and... ... more

Kee Safety 19-8 Adjustable Side Outlet Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Used in pairs to form variable angle joints between 90� and 180�. When calculating cutting lengths for pipe, dimension 'E' should be subtracted to give true pipe length. In the case of KK19-8 and KK19-85, you can produce an angle range between 60� and...

BuyRailings.com

$35.67

FREE shipping

go to store
Kee Safety 31-8 Pallet Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 31-8 Pallet Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting has been designed for the construction of post pallets. Incorporates sockets for the upright and side pipes, and a locating bell for stacking pallets. (Special Order Only) Part Weight A D E F 31-8 4.4 lbs. 8 2.99 in. 5 in. 4.53 in. ... more

Kee Safety 31-8 Pallet Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting has been designed for the construction of post pallets. Incorporates sockets for the upright and side pipes, and a locating bell for stacking pallets. (Special Order Only) Part Weight A D E F 31-8 4.4 lbs. 8 2.99 in. 5 in. 4.53 in.

BuyRailings.com

$62.57

FREE shipping

go to store
Kee Safety 68-8 Wall Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 68-8 Wall Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. e� indicates diameter of fixing holes. If the upright is required to pass through the fitting by machining out the base stop,... ... more

Kee Safety 68-8 Wall Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Side fixing for guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. e� indicates diameter of fixing holes. If the upright is required to pass through the fitting by machining out the base stop,...

BuyRailings.com

$33.82

FREE shipping

go to store
Kee Safety F50-8 Female Single Swivel Socket Member 1-1/2" IPS (1.94" ID)

Kee Safety F50-8 Female Single Swivel Socket Member 1-1/2" IPS (1.94" ID)

One part of a combination fitting with KKM50. The Type F50, in size 4, has only one ear while Type F50, in sizes 5 through 9, has two ears. The distance between the ears on sizes 5 through 9 is 12.70mm or 1/2 inch. ... more

Kee Safety F50-8 Female Single Swivel Socket Member 1-1/2" IPS (1.94" ID)

One part of a combination fitting with KKM50. The Type F50, in size 4, has only one ear while Type F50, in sizes 5 through 9, has two ears. The distance between the ears on sizes 5 through 9 is 12.70mm or 1/2 inch.

BuyRailings.com

$14.19

FREE shipping

go to store
Kee Safety 29-8 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 29-8 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed as an alternative to the KK12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30� and 60�. As an alternative, it is possible to use KK29 in its vertical position in... ... more

Kee Safety 29-8 30 Degree to 60 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed as an alternative to the KK12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30� and 60�. As an alternative, it is possible to use KK29 in its vertical position in...

BuyRailings.com

$23.65

FREE shipping

go to store
Kee Safety 16-8 Clamp-on Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 16-8 Clamp-on Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Widely used for adding to and modifying existing structures. This performs the same function as a KK10, but because of its open socket, it can be added to a complete structure. For alternative fitting, see KKA10. KK25 should be used when a join in the... ... more

Kee Safety 16-8 Clamp-on Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Widely used for adding to and modifying existing structures. This performs the same function as a KK10, but because of its open socket, it can be added to a complete structure. For alternative fitting, see KKA10. KK25 should be used when a join in the...

BuyRailings.com

$34.18

FREE shipping

go to store
Kee Safety 18-8 Internal Coupling Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 18-8 Internal Coupling Galvanized Steel 1-1/2" IPS (1.94" ID)

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must... ... more

Kee Safety 18-8 Internal Coupling Galvanized Steel 1-1/2" IPS (1.94" ID)

An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must...

BuyRailings.com

$25.65

FREE shipping

go to store
Kee Safety 60-8 Extra Heavy Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 60-8 Extra Heavy Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings only, is for use on structures where the fixing required is positional only. Frequently used as... ... more

Kee Safety 60-8 Extra Heavy Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

A heavy duty flange, with wide base, for spreading loads over a large surface area. This flange, with holes provided for countersunk flat head screw fixings only, is for use on structures where the fixing required is positional only. Frequently used as...

BuyRailings.com

$46.54

FREE shipping

go to store
Kee Safety 69-8 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 69-8 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or... ... more

Kee Safety 69-8 Rail Flange With Toe Board Adapter Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a toeboard to the base. The base plate holes are of sufficient diameter to allow for attachment with either a mechanical or...

BuyRailings.com

$52.27

FREE shipping

go to store
Kee Safety 70-8 Rail Support Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 70-8 Rail Support Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. KK70 is also... ... more

Kee Safety 70-8 Rail Support Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined within the fitting. KK70 is also...

BuyRailings.com

$23.75

FREE shipping

go to store
Kee Safety 35-8 Three Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 35-8 Three Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Most frequently used to tie uprights with horizontal pipes in three directions, all at 90� to the upright. The upright passes through the fitting. Part Weight A D E 35-4 0.44 lbs. 4 1.34 in. 2.64 in. 35-5 0.77 lbs. 5 1.61 in. 3.23 in. 35-6 0.99 lbs. 6... ... more

Kee Safety 35-8 Three Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Most frequently used to tie uprights with horizontal pipes in three directions, all at 90� to the upright. The upright passes through the fitting. Part Weight A D E 35-4 0.44 lbs. 4 1.34 in. 2.64 in. 35-5 0.77 lbs. 5 1.61 in. 3.23 in. 35-6 0.99 lbs. 6...

BuyRailings.com

$29.40

FREE shipping

go to store
Kee Safety 90-8 PGR Three Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 90-8 PGR Three Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

KK90 is used to join the top rail to an intermediate upright. (Special Order Only). Part Weight A D E 90-8 3.89 lbs. 8 3.9 in. 3.46 in. ... more

Kee Safety 90-8 PGR Three Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

KK90 is used to join the top rail to an intermediate upright. (Special Order Only). Part Weight A D E 90-8 3.89 lbs. 8 3.9 in. 3.46 in.

BuyRailings.com

$57.68

FREE shipping

go to store
Kee Safety 350-8 Eave Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 350-8 Eave Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

The Type 350 fitting has been designed for small structural building applications and provides for significant load rating. When used with the Type 351 ridge fitting a truss arrangement for additional support can be achieved. Double set screws are... ... more

Kee Safety 350-8 Eave Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

The Type 350 fitting has been designed for small structural building applications and provides for significant load rating. When used with the Type 351 ridge fitting a truss arrangement for additional support can be achieved. Double set screws are...

BuyRailings.com

$34.97

FREE shipping

go to store
Kee Safety 84-8 Malleable Plug Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 84-8 Malleable Plug Galvanized Steel 1-1/2" IPS (1.94" ID)

A metal drive-in plug which is difficult to remove when installed. For an alternative in plastic, see KK77. This fitting can only be used with Schedule 40 steel pipe. ... more

Kee Safety 84-8 Malleable Plug Galvanized Steel 1-1/2" IPS (1.94" ID)

A metal drive-in plug which is difficult to remove when installed. For an alternative in plastic, see KK77. This fitting can only be used with Schedule 40 steel pipe.

BuyRailings.com

$5.82

FREE shipping

go to store
Kee Safety 10-8 Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 10-8 Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to give a 90� butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the... ... more

Kee Safety 10-8 Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to give a 90� butt_joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the...

BuyRailings.com

$16.34

FREE shipping

go to store
Kee Safety A10-8 Split Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety A10-8 Split Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to allow additions or extensions to existing structures without the need for dismantling. Pipe must not be joined within the fitting. Fitting has strength and function comparable to KK10 fittings. Part Weight A D E A10-7 1.25 lbs. 7 2.36 in.... ... more

Kee Safety A10-8 Split Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to allow additions or extensions to existing structures without the need for dismantling. Pipe must not be joined within the fitting. Fitting has strength and function comparable to KK10 fittings. Part Weight A D E A10-7 1.25 lbs. 7 2.36 in....

BuyRailings.com

$28.95

FREE shipping

go to store
Kee Safety 26-8 Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 26-8 Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Usually paired with KK25 to give a 90� joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting. Part Weight A B D 26-4 0.29 lbs. 4 4 2.68 in. 26-5 0.59 lbs. 5 5 3.19 in. 26-6 0.88 lbs. 6 6... ... more

Kee Safety 26-8 Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Usually paired with KK25 to give a 90� joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting. Part Weight A B D 26-4 0.29 lbs. 4 4 2.68 in. 26-5 0.59 lbs. 5 5 3.19 in. 26-6 0.88 lbs. 6 6...

BuyRailings.com

$23.48

FREE shipping

go to store
Kee Safety 30-8 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 30-8 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed as an alternative to the KK28 fitting, this adjustable fitting can be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected angle between 30� and... ... more

Kee Safety 30-8 30 to 45 degree Adjustable Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed as an alternative to the KK28 fitting, this adjustable fitting can be used for railing on staircases between the midrail and an intermediate upright which is required to remain vertical. It may be used at any selected angle between 30� and...

BuyRailings.com

$38.91

FREE shipping

go to store
Kee Safety 67-8 Angle Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 67-8 Angle Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

KK67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3� up to a maximum of 11�, measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes.... ... more

Kee Safety 67-8 Angle Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

KK67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3� up to a maximum of 11�, measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes....

BuyRailings.com

$34.75

FREE shipping

go to store
Kee Safety C58-8 Swivel Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety C58-8 Swivel Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to KKF50 and KKM58. It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure. Part Weight A C58-5 1.54 lbs. 5... ... more

Kee Safety C58-8 Swivel Flange Galvanized Steel 1-1/2" IPS (1.94" ID)

A swivel fitting for attachment of angled pipe to a flat surface. For dimensions refer to KKF50 and KKM58. It is not recommended for use as a base flange to support guardrailing, balustrading or other types of structure. Part Weight A C58-5 1.54 lbs. 5...

BuyRailings.com

$27.90

FREE shipping

go to store
Kee Safety A40-8 Split Four Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety A40-8 Split Four Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting enables existing structures to be easily extended without the need for dismantling. This fitting is most frequently used in multiple upright structures to tie a center upright with horizontal pipes in... ... more

Kee Safety A40-8 Split Four Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting enables existing structures to be easily extended without the need for dismantling. This fitting is most frequently used in multiple upright structures to tie a center upright with horizontal pipes in...

BuyRailings.com

$71.37

FREE shipping

go to store
Kee Safety 91-8 PGR Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 91-8 PGR Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

KK91 is used to join the midrail to an intermediate upright. (Special Order Only). Part Weight A D E 91-8 3.96 lbs. 8 3.9 in. 3.5 in. ... more

Kee Safety 91-8 PGR Two Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

KK91 is used to join the midrail to an intermediate upright. (Special Order Only). Part Weight A D E 91-8 3.96 lbs. 8 3.9 in. 3.5 in.

BuyRailings.com

$58.30

FREE shipping

go to store
Kee Safety 71-8 Weather Cap Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 71-8 Weather Cap Galvanized Steel 1-1/2" IPS (1.94" ID)

KK71 is a weather cap designed for roof guardrailing to ensure a weathertight seal for base fixing flanges. The weather cap is secured to the upright by means of a combined sealant and adhesive. Part Weight A D E F 71-6 0.53 lbs. 6 4.92 in. 5.63 in.... ... more

Kee Safety 71-8 Weather Cap Galvanized Steel 1-1/2" IPS (1.94" ID)

KK71 is a weather cap designed for roof guardrailing to ensure a weathertight seal for base fixing flanges. The weather cap is secured to the upright by means of a combined sealant and adhesive. Part Weight A D E F 71-6 0.53 lbs. 6 4.92 in. 5.63 in....

BuyRailings.com

$35.30

FREE shipping

go to store
Kee Safety 351-8 Ridge Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 351-8 Ridge Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK351 fitting has been designed for small structural building applications and provides for significant load rating. When used with the KK350 eave fitting a truss arrangement for additional support can be achieved. Double set screws are provided on... ... more

Kee Safety 351-8 Ridge Fitting Galvanized Steel 1-1/2" IPS (1.94" ID)

The KK351 fitting has been designed for small structural building applications and provides for significant load rating. When used with the KK350 eave fitting a truss arrangement for additional support can be achieved. Double set screws are provided on...

BuyRailings.com

$29.84

FREE shipping

go to store
Kee Safety 17-8 Clamp-on Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 17-8 Clamp-on Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to provide a 90� cross-over joint. Can be added to an existing structure. Pipe should not be joined within this fitting. For alternative fitting, see KK45 or KKA45. Part Weight A D E 17-5 0.33 lbs. 5 1.06 in. 1.57 in. 17-6 0.51 lbs. 6 1.34 in.... ... more

Kee Safety 17-8 Clamp-on Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Designed to provide a 90� cross-over joint. Can be added to an existing structure. Pipe should not be joined within this fitting. For alternative fitting, see KK45 or KKA45. Part Weight A D E 17-5 0.33 lbs. 5 1.06 in. 1.57 in. 17-6 0.51 lbs. 6 1.34 in....

BuyRailings.com

$17.78

FREE shipping

go to store
Kee Safety 327-8 Three Socket Custom Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 327-8 Three Socket Custom Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Replaces the disontinued type KK27, it is used on Safety Railing with slopes between 11��30� and fixes the top rail to a vertical intermediate upright. Unlike the type 27 these components are ex-stock and do not require machining. Part Part Name Weight... ... more

Kee Safety 327-8 Three Socket Custom Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Replaces the disontinued type KK27, it is used on Safety Railing with slopes between 11��30� and fixes the top rail to a vertical intermediate upright. Unlike the type 27 these components are ex-stock and do not require machining. Part Part Name Weight...

BuyRailings.com

$64.95

FREE shipping

go to store
Kee Safety 12-8 45 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 12-8 45 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting enables existing structures to be easily extended without the need for dismantling. This fitting is most frequently used for bracing and struts. Part Weight A D E F 12-5 0.66 lbs. 5 1.38 in. 2.83 in.... ... more

Kee Safety 12-8 45 Degree Single Socket Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting enables existing structures to be easily extended without the need for dismantling. This fitting is most frequently used for bracing and struts. Part Weight A D E F 12-5 0.66 lbs. 5 1.38 in. 2.83 in....

BuyRailings.com

$26.18

FREE shipping

go to store
Kee Safety 86-8 Angle Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 86-8 Angle Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Used to join the middle rail to an end upright on a guardrail on a slope from 0� to 11�. Pipe cannot be joined within this fitting. Part Weight A D 86-7 1.21 lbs. 7 2.36 in. 86-8 1.67 lbs. 8 2.68 in. ... more

Kee Safety 86-8 Angle Tee Galvanized Steel 1-1/2" IPS (1.94" ID)

Used to join the middle rail to an end upright on a guardrail on a slope from 0� to 11�. Pipe cannot be joined within this fitting. Part Weight A D 86-7 1.21 lbs. 7 2.36 in. 86-8 1.67 lbs. 8 2.68 in.

BuyRailings.com

$23.00

FREE shipping

go to store
Kee Safety A45-8 Split Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety A45-8 Split Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fittings enables existing structures to be easily extended without the need for dismantling. This fitting is designed to give a 90� offset crossover joint. Pipe should not be joined within the fitting. KKA45... ... more

Kee Safety A45-8 Split Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fittings enables existing structures to be easily extended without the need for dismantling. This fitting is designed to give a 90� offset crossover joint. Pipe should not be joined within the fitting. KKA45...

BuyRailings.com

$32.42

FREE shipping

go to store
Kee Safety A35-8 Split 3 Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety A35-8 Split 3 Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting, enables existing structures to be easily extended without the need for dismantling. This fitting has been designed to tie an upright with horizontal pipes in three directions, all at 90� to the... ... more

Kee Safety A35-8 Split 3 Socket Cross Galvanized Steel 1-1/2" IPS (1.94" ID)

The unique "Hinge and Pin" system of this fitting, enables existing structures to be easily extended without the need for dismantling. This fitting has been designed to tie an upright with horizontal pipes in three directions, all at 90� to the...

BuyRailings.com

$61.77

FREE shipping

go to store
Kee Safety 64-8 Standard Vertical Railing Base Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 64-8 Standard Vertical Railing Base Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a... ... more

Kee Safety 64-8 Standard Vertical Railing Base Galvanized Steel 1-1/2" IPS (1.94" ID)

This fitting is designed for fixing guardrailing and balustrading to walls, parapets, steps and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a...

BuyRailings.com

$49.15

FREE shipping

go to store
Kee Safety 46-8 Combination Socket Tee and Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Kee Safety 46-8 Combination Socket Tee and Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to... ... more

Kee Safety 46-8 Combination Socket Tee and Crossover Galvanized Steel 1-1/2" IPS (1.94" ID)

Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to...

BuyRailings.com

$33.34

FREE shipping

go to store
Show
Hide
Hide